CYBERAXE

Linux version 2.6.12-12mdk (apatard@n1.mandriva.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 Fri Sep 9 18:15:22 CEST 2005BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bff0000 (usable) BIOS-e820: 000000001bff0000 - 000000001bffffc0 (ACPI data) BIOS-e820: 000000001bffffc0 - 000000001c000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)0MB HIGHMEM available.447MB LOWMEM available.NX (Execute Disable) protection: activeOn node 0 totalpages: 114672  DMA zone: 4096 pages, LIFO batch:1  Normal zone: 110576 pages, LIFO batch:31  HighMem zone: 0 pages, LIFO batch:1DMI 2.3 present.ACPI: RSDP (v000 OID_00                                ) @ 0x000e6010ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1bffbff0ACPI: FADT (v001 INSYDE FACP_000 0x00000100 _CSI 0x00010101) @ 0x1bfffaa0ACPI: BOOT (v001 INSYDE SYS_BOOT 0x00000100 _CSI 0x00010101) @ 0x1bfffb90ACPI: DBGP (v001 INSYDE DBGP_000 0x00000100 _CSI 0x00010101) @ 0x1bfffbc0ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x30303030) @ 0x1bfffb30ACPI: DSDT (v001 INSYDE   K8N800 0x00001000 INTL 0x02002036) @ 0x00000000ACPI: PM-Timer IO Port: 0x1008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Processor #0 15:12 APIC version 16ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode:  Flat.  Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 1c000000 (gap: 1c000000:e3f80000)Built 1 zonelistsmapped APIC to ffffd000 (fee00000)mapped IOAPIC to ffffc000 (fec00000)Initializing CPU#0Kernel command line: BOOT_IMAGE=linux root=305 resume=/dev/hda6 splash=silentbootsplash: silent mode.PID hash table entries: 2048 (order: 11, 32768 bytes)Detected 1804.899 MHz processor.Using pmtmr for high-res timesourceConsole: colour dummy device 80x25Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)Memory: 450180k/458688k available (2348k kernel code, 7948k reserved, 717k data, 268k init, 0k highmem, 0k BadRAM)Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay loop... 3579.90 BogoMIPS (lpj=1789952)Mount-cache hash table entries: 512CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)CPU: L2 Cache: 128K (64 bytes/line)CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000010 00000000 00000000 00000001Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.CPU: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 00Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Checking 'hlt' instruction... OK.ACPI: Looking for DSDT in initrd... not found.ENABLING IO-APIC IRQs..TIMER: vector=0x31 pin1=2 pin2=-1checking if image is initramfs...it isn't (no cpio magic); looks like an initrdFreeing initrd memory: 180k freedNET: Registered protocol family 16PCI: PCI BIOS revision 2.10 entry at 0xe9944, last bus=1PCI: Using configuration type 1mtrr: v2.0 (20020519)ACPI: Subsystem revision 20050309ACPI: Interpreter enabledACPI: Using IOAPIC for interrupt routingACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Probing PCI hardware (bus 00)Boot video device is 0000:01:00.0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: Embedded Controller [EC0] (gpe 1)ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *9Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initpnp: PnP ACPI: found 8 devicesPnPBIOS: DisabledPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a reportpnp: 00:05: ioport range 0x3f0-0x3f5 has been reservedpnp: 00:05: ioport range 0x680-0x68f has been reservedpnp: 00:05: ioport range 0x1000-0x107f could not be reservedSimple Boot Flag at 0x37 set to 0x1apm: BIOS not found.audit: initializing netlink socket (disabled)audit(1150026387.407:0): initializedVFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)devfs: boot_options: 0x0Initializing Cryptographic APIvesafb: framebuffer at 0xa4000000, mapped to 0xdc880000, using 3750k, total 65536kvesafb: mode is 800x600x16, linelength=1600, pages=63vesafb: protected mode interface info at c000:a62bvesafb: scrolling: redrawvesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 34430 bytes,<6>...found (800x600, 34382 bytes, v3).Console: switching to colour frame buffer device 93x30fb0: VESA VGA frame buffer deviceisapnp: Scanning for PnP cards...isapnp: No Plug & Play device foundReal Time Clock Driver v1.12PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12i8042.c: Detected active multiplexing controller, rev 1.1.serio: i8042 AUX0 port at 0x60,0x64 irq 12serio: i8042 AUX1 port at 0x60,0x64 irq 12serio: i8042 AUX2 port at 0x60,0x64 irq 12serio: i8042 AUX3 port at 0x60,0x64 irq 12serio: i8042 KBD port at 0x60,0x64 irq 1Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabledio scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registeredRAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksizepktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.comUniform Multi-Platform E-IDE driver Revision: 7.00alpha2ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: IDE controller at PCI slot 0000:00:11.1ACPI: PCI Interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 20PCI: Via IRQ fixup for 0000:00:11.1, from 0 to 4VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs laterVP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1    ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio    ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pioProbing IDE interface ide0...hda: ST950212A, ATA DISK driveide0 at 0x1f0-0x1f7,0x3f6 on irq 14Probing IDE interface ide1...hdc: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM driveide1 at 0x170-0x177,0x376 on irq 15hda: max request size: 1024KiBhda: 97692174 sectors (50018 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 p7 p8 > p2mice: PS/2 mouse device common for all micemd: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27NET: Registered protocol family 2IP: routing cache hash table of 4096 buckets, 32KbytesTCP established hash table entries: 16384 (order: 5, 131072 bytes)TCP bind hash table entries: 16384 (order: 4, 65536 bytes)TCP: Hash tables configured (established 16384 bind 16384)NET: Registered protocol family 1input: AT Translated Set 2 keyboard on isa0060/serio0swsusp: Suspend partition has wrong signature?ACPI wakeup devices:SBTN USB0 USB1 USB2 EHCI AC97 MC97 LAN0ACPI: (supports S0 S3 S4 S5)BIOS EDD facility v0.16 2004-Jun-25, 1 devices founddevfs_mk_dev: could not append to parent for md/0md: Autodetecting RAID arrays.md: autorun ...md: ... autorun DONE.RAMDISK: Compressed image found at block 0VFS: Mounted root (ext2 filesystem).kjournald starting.  Commit interval 5 secondsEXT3-fs: mounted filesystem with ordered data mode.Freeing unused kernel memory: 268k freedSynaptics Touchpad, model: 1, fw: 6.2, id: 0x3aa0b4, caps: 0xa04713/0x200000input: SynPS/2 Synaptics TouchPad on isa0060/serio3usbcore: registered new driver usbfsusbcore: registered new driver hubUSB Universal Host Controller Interface driver v2.2ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5uhci_hcd 0000:00:10.0: UHCI Host Controlleruhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1uhci_hcd 0000:00:10.0: irq 21, io base 0x00001200hub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5uhci_hcd 0000:00:10.1: UHCI Host Controlleruhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2uhci_hcd 0000:00:10.1: irq 21, io base 0x00001300hub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21uhci_hcd 0000:00:10.2: UHCI Host Controlleruhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3uhci_hcd 0000:00:10.2: irq 21, io base 0x00001700hub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detectedACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21PCI: Via IRQ fixup for 0000:00:10.3, from 9 to 5ehci_hcd 0000:00:10.3: EHCI Host Controllerehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4ehci_hcd 0000:00:10.3: irq 21, io mem 0xf0040000ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004hub 4-0:1.0: USB hub foundhub 4-0:1.0: 6 ports detectedts: Compaq touchscreen protocol outputEXT3 FS on hda5, internal journalAdding 522072k swap on /dev/hda6.  Priority:-1 extents:1Non-volatile memory driver v1.2Linux agpgart interface v0.101 (c) Dave Jonesagpgart: Detected AGP bridge 0agpgart: AGP aperture is 256M @ 0xb0000000kjournald starting.  Commit interval 5 secondsEXT3 FS on hda2, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting.  Commit interval 5 secondsEXT3 FS on hda7, internal journalEXT3-fs: mounted filesystem with ordered data mode.kjournald starting.  Commit interval 5 secondsEXT3 FS on hda8, internal journalEXT3-fs: mounted filesystem with ordered data mode.loop: loaded (max 8 devices)hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)Uniform CD-ROM driver Revision: 3.20ACPI: AC Adapter [AC] (on-line)ACPI: Battery Slot [BAT0] (battery present)ACPI: Power Button (FF) [PWRF]ACPI: Lid Switch [LID]ACPI: Sleep Button (CM) [SBTN]ACPI: CPU0 (power states: C1[C1] C2[C2])ACPI: Thermal Zone [TZ0] (66 C)ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)floppy0: no floppy controllers foundfloppy0: no floppy controllers foundusbcore: registered new driver hiddevusbcore: registered new driver usbhiddrivers/usb/input/hid-core.c: v2.01:USB HID core driverNET: Registered protocol family 17via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald BeckerACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 7eth0: VIA Rhine II at 0x1e200, 00:40:d0:70:ad:5c, IRQ 23.eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.eth0: link downndiswrapper version 1.2 loaded (preempt=no,smp=no)ndiswrapper: driver tnet1130 (Texas Instruments,03/10/2004,6.0.0.18) loadedACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18ndiswrapper: using irq 18wlan0: ndiswrapper ethernet device 00:60:b3:25:ba:de using driver tnet1130, configuration file 104C:9066.5.confwlan0: encryption modes supported: WEP, WPA with TKIPvia82xx: Assuming DXS channels with 48k fixed sample rate.         Please try dxs_support=5 option         and report if it works on your machine.         For more details, read ALSA-Configuration.txt.ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 6PCI: Setting latency timer of device 0000:00:11.5 to 64hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }hdc: drive_cmd: error=0x04 { AbortedCommand }ide: failed opcode was: 0xechdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }hdc: drive_cmd: error=0x04 { AbortedCommand }ide: failed opcode was: 0xechdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }hdc: drive_cmd: error=0x04 { AbortedCommand }ide: failed opcode was: 0xecBluetooth: Core ver 2.7NET: Registered protocol family 31Bluetooth: HCI device and connection manager initializedBluetooth: HCI socket layer initializedBluetooth: L2CAP ver 2.7Bluetooth: L2CAP socket layer initializedBluetooth: RFCOMM ver 1.5Bluetooth: RFCOMM socket layer initializedBluetooth: RFCOMM TTY layer initializedNET: Registered protocol family 10Disabled Privacy Extensions on device c03c5760(lo)IPv6 over IPv4 tunneling driver[drm] Initialized drm 1.0.0 20040925[drm] Initialized via 2.6.3 20050523 on minor 0:agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.agpgart: X tried to set rate=x12. Setting to AGP3 x8 mode.agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x modeagpgart: Putting AGP V3 device at 0000:01:00.0 into 8x modelp: driver loaded but no devices foundpowernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3)powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x8 (1350 mV)powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)cpu_init done, current fid 0xa, vid 0x8eth0: no IPv6 routers presentwlan0: no IPv6 routers presentbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).bootsplash: status on console 0 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).bootsplash: status on console 1 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).bootsplash: status on console 2 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).bootsplash: status on console 3 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).bootsplash: status on console 4 changed to onbootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 10117 bytes, v3).bootsplash: status on console 5 changed to onfloppy0: no floppy controllers foundfloppy0: no floppy controllers foundfloppy0: no floppy controllers foundfloppy0: no floppy controllers foundSCSI subsystem initializedISO 9660 Extensions: Microsoft Joliet Level 1ISOFS: changing to secondary rootVFS: busy inodes on changed media.VFS: busy inodes on changed media.cdrom: This disc doesn't have any tracks I recognize!