lspci
-----
00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 Sout
h]
00:0f.0 IDE interface: VIA Technologies, Inc. VT8251 AHCI/SATA 4-Port Controller
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/
C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 90)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 90)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 90)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 90)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra
nsport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con
troller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella
neous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Seconda
ry)
02:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
02:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controlle
r
05:0c.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416)
MPEG-2 Encoder (rev 01)
05:0d.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 80
2.11b/g Wireless (rev 03)
lsmod
-----
Module Size Used by
vt8231 19408 0
eeprom 8656 0
it87 23760 0
hwmon_vid 3392 1 it87
i2c_isa 5440 2 vt8231,it87
i2c_dev 8392 0
button 9568 0
ac 6536 0
battery 11720 0
ipv6 260264 18
smbfs 64336 2
jfs 159856 1
dm_snapshot 17160 0
dm_mirror 21120 0
dm_mod 58640 2 dm_snapshot,dm_mirror
snd_via82xx 29864 0
gameport 16592 1 snd_via82xx
snd_ac97_codec 111704 1 snd_via82xx
ac97_bus 3264 1 snd_ac97_codec
snd_mpu401_uart 8960 1 snd_via82xx
snd_rawmidi 26144 1 snd_mpu401_uart
snd_seq_device 9108 1 snd_rawmidi
loop 19012 0
tsdev 9536 0
radeonfb 103680 0
fb_ddc 3200 1 radeonfb
usbhid 27776 0
usbmouse 6336 0
i2c_algo_bit 6980 1 radeonfb
psmouse 41116 0
snd_hda_intel 307616 0
parport_pc 38184 0
parport 39500 1 parport_pc
serio_raw 7748 0
i2c_viapro 10008 0
k8temp 6656 0
snd_pcm 82828 3 snd_via82xx,snd_ac97_codec,snd_hda_intel
snd_timer 23624 1 snd_pcm
snd 60520 8 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_r
awmidi,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer
soundcore 8928 1 snd
snd_page_alloc 10896 3 snd_via82xx,snd_hda_intel,snd_pcm
fglrx 806036 0
i2c_core 27608 9 vt8231,eeprom,it87,i2c_isa,i2c_dev,radeonfb,fb_d
dc,i2c_algo_bit,i2c_viapro
shpchp 34524 0
pci_hotplug 16584 1 shpchp
evbug 4032 0
evdev 11392 0
ext3 130512 1
jbd 57456 1 ext3
ide_cd 40608 0
cdrom 36072 1 ide_cd
ide_disk 17536 4
via_rhine 25416 0
mii 6336 1 via_rhine
ehci_hcd 32844 0
uhci_hcd 24792 0
via82cxxx 9796 0 [permanent]
generic 6532 0 [permanent]
ide_core 138288 4 ide_cd,ide_disk,via82cxxx,generic
thermal 15696 0
processor 27132 1 thermal
fan 6152 0
sensors-detect
--------------
# sensors-detect revision 4171 (2006-09-24 03:37:01 -0700)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-viapro' for device 0000:00:11.0: VIA Technologies VT8251 South Bridge
We will now try to load each adapter module in turn.
Module `i2c-viapro' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SMBus Via Pro adapter at 0400
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x51
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x53
Handled by driver `eeprom' (already loaded), chip type `eeprom'
Client found at address 0x69
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `Winbond W83627HF' at 0x290... No
Probing for `Silicon Integrated Systems SIS5595'... No
Probing for `VIA VT82C686 Integrated Sensors'... No
Probing for `VIA VT8231 Integrated Sensors'... No
Probing for `AMD K8 thermal sensors'... Success!
(confidence 9, driver `k8temp')
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for Super-I/O at 0x2e/0x2f
Trying family `ITE'... Yes
Found `ITE IT8712F Super IO Sensors' Success!
(address 0xd00, driver `it87')
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `ITE'... No
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Now follows a summary of the probes I have just done.
Detects correctly:
* Bus `SMBus Via Pro adapter at 0400'
Busdriver `i2c-viapro', I2C address 0x51
Chip `eeprom' (confidence: 6)
* Bus `SMBus Via Pro adapter at 0400'
Busdriver `i2c-viapro', I2C address 0x53
Chip `eeprom' (confidence: 6)
EEPROMs are *NOT* sensors! They are data storage chips commonly
found on memory modules (SPD), in monitors (EDID), or in some
laptops, for example.
Driver `k8temp' (should be inserted):
Detects correctly:
* ISA bus, undetermined address (Busdriver `i2c-isa')
Chip `AMD K8 thermal sensors' (confidence: 9)
Driver `it87' (should be inserted):
Detects correctly:
* ISA bus address 0x0d00 (Busdriver `i2c-isa')
Chip `ITE IT8712F Super IO Sensors' (confidence: 9)
sensors (sensors version 2.10.1 with libsensors version 2.10.1)
-------
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:
+39°C
it8712-i2c-9191-d00
ERROR: Can't get adapter or algorithm?!?
VCore 1: +1.47 V (min = +0.00 V, max = +4.08 V)
VCore 2: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM
+3.3V: +3.38 V (min = +0.00 V, max = +4.08 V)
+5V: +5.08 V (min = +0.00 V, max = +6.85 V)
+12V: +12.86 V (min = +0.00 V, max = +16.32 V)
-12V: +3.93 V (min = -27.36 V, max = +3.93 V) ALARM
-5V: +4.03 V (min = -13.64 V, max = +4.03 V) ALARM
Stdby: +6.85 V (min = +0.00 V, max = +6.85 V) ALARM
VBat: +3.14 V
fan1: 964 RPM (min = 0 RPM, div = 8)
fan2: 2689 RPM (min = 0 RPM, div = 2)
M/B Temp: +38°C (low = -1°C, high = +127°C) sensor = thermistor
CPU Temp: +37°C (low = -1°C, high = +127°C) sensor = thermistor
Temp3: +128°C (low = -1°C, high = +127°C) sensor = disabled
pwmconfig
---------
Found the following PWM controls:
9191-0d00/pwm1
9191-0d00/pwm2
9191-0d00/pwm3
Found the following fan sensors:
9191-0d00/fan1_input current speed: 958 RPM
9191-0d00/fan2_input current speed: 2678 RPM
Warning!!! This program will stop your fans, one at a time,
for approximately 5 seconds each!!!
This may cause your processor temperature to rise!!!
If you do not want to do this hit control-C now!!!
Hit return to continue:
Testing pwm control 9191-0d00/pwm1 ...
9191-0d00/fan1_input ... speed was 958 now 964
no correlation
9191-0d00/fan2_input ... speed was 2678 now 2689
no correlation
No correlations were detected.
There is either no fan connected to the output of 9191-0d00/pwm1,
or the connected fan has no rpm-signal connected to one of
the tested fan sensors. (Note: not all motherboards have
the pwm outputs connected to the fan connectors,
check out the hardware database on http://www.almico.com/forumindex.php)
Testing pwm control 9191-0d00/pwm2 ...
9191-0d00/fan1_input ... speed was 958 now 964
no correlation
9191-0d00/fan2_input ... speed was 2678 now 2678
no correlation
No correlations were detected.
There is either no fan connected to the output of 9191-0d00/pwm2,
or the connected fan has no rpm-signal connected to one of
the tested fan sensors. (Note: not all motherboards have
the pwm outputs connected to the fan connectors,
check out the hardware database on http://www.almico.com/forumindex.php)
Testing pwm control 9191-0d00/pwm3 ...
9191-0d00/fan1_input ... speed was 958 now 958
no correlation
9191-0d00/fan2_input ... speed was 2678 now 2689
no correlation
No correlations were detected.
There is either no fan connected to the output of 9191-0d00/pwm3,
or the connected fan has no rpm-signal connected to one of
the tested fan sensors. (Note: not all motherboards have
the pwm outputs connected to the fan connectors,
check out the hardware database on http://www.almico.com/forumindex.php)