Anonymous

2007-07-30 20:10:37.451 TVRec(1): ClearFlags(CancelNextRecording,) -> RunMainLoop,
2007-07-30 20:10:37.452 TVRec(1): Changing from None to RecordingOnly
2007-07-30 20:10:37.452 TVRec(1): ClearFlags(FrontendReady,CancelNextRecording,) -> RunMainLoop,
2007-07-30 20:10:37.452 TVRec(1): Request: Program(yes) channel() input() flags(Recording,)
2007-07-30 20:10:37.454 TVRec(1): HW Tuner: 1->1
2007-07-30 20:10:37.454 TVRec(1): ClearFlags(PENDINGACTIONS,) -> RunMainLoop,
2007-07-30 20:10:37.455 DVBChan(1:1): Opening DVB channel
2007-07-30 20:10:38.310 DVBChan(1:1): Using DVB card 1, with frontend 'Genpix 8psk-USB DVB-S'.
2007-07-30 20:10:38.310 DiSEqCDevTree: Changing LNB voltage to 18V
2007-07-30 20:10:38.818 DiSEqCDevTree: Resetting DiSEqC Bus
2007-07-30 20:10:38.818 DiSEqCDevTree: Sending DiSEqC Command: e0  0  0
2007-07-30 20:10:39.089 ChannelBase(1): Input #1: 'DVBInput #1' schan(184) sourceid(2) ccid(1)
2007-07-30 20:10:39.089 ChannelBase(1): Input #5: 'DVBInput #2' schan() sourceid(4) ccid(1)
2007-07-30 20:10:39.089 ChannelBase(1): Input #9: 'DVBInput #3' schan(192) sourceid(5) ccid(1)
2007-07-30 20:10:39.089 ChannelBase(1): Input #13: 'DVBInput #4' schan(257) sourceid(3) ccid(1)2007-07-30 20:10:39.090 ChannelBase(1): Current Input #1: 'DVBInput #1'
2007-07-30 20:10:39.090 DVBChan(1:1): SetChannelByString(9470):
2007-07-30 20:10:39.101 ChannelBase(1): Failed to find channel(9470) on current input (DVBInput #1) of card (1).
2007-07-30 20:10:39.102 ChannelBase(1): Found channel(9470) on another input (DVBInput #4) of card (1).
2007-07-30 20:10:39.109 DVBChan(1:1): 12661400 8psk a auto auto a a auto a r
2007-07-30 20:10:39.110 DiSEqCDevTree: Changing LNB voltage to 13V
2007-07-30 20:10:39.134 DiSEqCDevTree: Changing to DiSEqC switch port 4/4
2007-07-30 20:10:39.134 DiSEqCDevTree: Sending DiSEqC Command: e0 10 38 fc
2007-07-30 20:10:39.318 DVBChan(1:1): Old Params: 12238580 qpsk a auto auto a a auto a l
                        DVBChan(1:1): New Params: 12661400 8psk a auto auto a a auto a r
2007-07-30 20:10:39.318 DVBChan(1:1): Tune(): Tuning to 1411400kHz
2007-07-30 20:10:40.026 dvbchannel.cpp:wait_for_backend: Status:
2007-07-30 20:10:40.027 DVBChan(1:1): Tune(): Frequency tuning successful.
2007-07-30 20:10:40.027 DVBChan(1:1): SetChannelByString(9470): Tuned to frequency.
2007-07-30 20:10:40.027 TVRec(1): Starting Signal Monitor
2007-07-30 20:10:40.027 TVRec(1): SetupSignalMonitor(1, 0)
2007-07-30 20:10:40.027 DVBChan(1:1): Opening DVB channel
2007-07-30 20:10:40.028 DVBSM(1): Can measure Signal Strength
2007-07-30 20:10:40.028 DVBSM(1): Can measure S/N
2007-07-30 20:10:40.028 DVBSM(1): Can measure Bit Error Rate
2007-07-30 20:10:40.028 DVBSM(1): Can count Uncorrected Blocks
2007-07-30 20:10:40.028 SM(1)::RemoveFlags: Seen() Match() Wait()
2007-07-30 20:10:40.028 DVBSM(1): DVBSignalMonitor::ctor initial flags Seen() Match() Wait(Sig,SNR,BER,UB,)
2007-07-30 20:10:40.338 TVRec(1): Signal monitor successfully created
2007-07-30 20:10:40.338 TVRec(1): Setting up table monitoring.
2007-07-30 20:10:40.344 Using profile 'Live TV' to record
2007-07-30 20:10:40.377 TVRec(1): MPEG program number: 9470
2007-07-30 20:10:40.381 DTVSM(1)::SetProgramNumber(9470):
2007-07-30 20:10:40.382 SM(1)::RemoveFlags: Seen(PMT,Crypt,) Match(PMT,Crypt,) Wait()
2007-07-30 20:10:40.382 SM(1)::AddFlags: Seen() Match() Wait(PMT,)
2007-07-30 20:10:40.382 SM(1)::AddFlags: Seen() Match() Wait(PAT,PMT,Pos,)
2007-07-30 20:10:40.382 TVRec(1): Successfully set up MPEG table monitoring.
2007-07-30 20:10:40.382 SM(1)::Start: begin
2007-07-30 20:10:40.383 SM(1)::AddFlags: Seen() Match() Wait(Sig,)
2007-07-30 20:10:40.390 SM(1)::Start: end
2007-07-30 20:10:40.390 TVRec(1): SetFlags(SignalMonitorRunning,) -> RunMainLoop,SignalMonitorRunning,
2007-07-30 20:10:40.390 TVRec(1): ClearFlags(WaitingForSignal,) -> RunMainLoop,SignalMonitorRunning,
2007-07-30 20:10:40.391 TVRec(1): SetFlags(WaitingForSignal,) -> RunMainLoop,WaitingForSignal,SignalMonitorRunning,
2007-07-30 20:10:40.391 TVRec(1): ClearFlags(NeedToStartRecorder,) -> RunMainLoop,WaitingForSignal,SignalMonitorRunning,
2007-07-30 20:10:40.391 TVRec(1): SetFlags(NeedToStartRecorder,) -> RunMainLoop,WaitingForSignal,NeedToStartRecorder,SignalMonitorRunning,
2007-07-30 20:10:40.690 SM(1)::AddFlags: Seen() Match() Wait(Sig,)
2007-07-30 20:10:40.998 SM(1)::AddFlags: Seen() Match() Wait(Sig,)