Date: Mon, July 30 2007
Time: 10:24:33
IDE Channel 0 Master: None
IDE Channel 0 Slave: None
IDE Channel 1 master: None
IDE Channel 1 Slave: none
ide channel 2 master: none
ide channel 3 master: none
drive a: 1.44m, 3.5"
flopp 3 mode support: disabled
halt on: all, but keyboard
First boot device: floppy
second boot device: cdrom
third boot device: hard disk
password check: setup
hdd smart capability: enabled
liomite cpuid max. to 3: disabled
no-execute memory protect: enabled
CPU enhanced halt (C1E): enabled
CPU Thermal Monitor 2(TM2): Enabled
CPU EIST Function: enabled
Virtualized Technology: Enabled
Full screen LOGO show: disabled
Init display first: pci
sata raid/ahci mode: ahci
sata port0-3 native mode: enabled
usb controler: enabled
usb 2.0 controller: enabled
usb keyboard support: enabled
usb mouse support: disabled
legacy usb storage detect: enabled
azalia codec: disabled
onboard h/w 1394: enabled
onboard h/w lan: enabled
onboard lan boot rom: disabled
onboard sata/iide device: enabled
onboard sata/ide ctrl mode: raid/ide
onboard serial port 1: 3f8/irq4
onboard Paralelel port: 378/irq7
Parallel port mode: SPP
acpi suspsend type: s3(str)
soft-off by pwr-bttn: instant-off
pme event wake up: enabled
power on by ring: enabled
resume by alarm: disabled
hpet support: enabled
hpet mode: 32-bit mode
power on by mouse: disabled
power on by keyboard disabled:
ac back function: soft-off
pci1 irq assignment: auto
pci2 irq assignment: auto
robust graphics booster: auto
cpu clock ratio: 9x
cpu host clock control: disabled
pci express frequency(mhz): auto
C.I.A.2: disabled
System Memory multiplier(SPD): auto
High speed dram dll settings: option 1
performance enhance: turbo
system voltage control: manual
ddr2 overvoltage control: normal
pci-e overvoltage control: normal
fsb overvoltage control: normal
MCH overvoltage control: normal
CPU: voltage control: normal