lba32
# If lba32 do not work, use linear:
#linear
# MBR to install LILO to:
boot = /dev/sda
map = /boot/.map
# If you are having problems booting from a hardware raid-array
# or have a unusual setup, try this:
#disk=/dev/ataraid/disc0/disc bios=0x80 # see this as the first BIOS disk
#disk=/dev/sda bios=0x81 # see this as the second BIOS disk
#disk=/dev/hda bios=0x82 # see this as the third BIOS disk
# Here you can select the secondary loader to install. A few
# examples is:
#
# boot-text.b
# boot-menu.b
# boot-bmp.b
#
#install = /boot/boot-menu.b # Note that for lilo-22.5.5 or later you
# do not need boot-{text,menu,bmp}.b in
# /boot, as they are linked into the lilo
# binary.
menu-scheme=Wb
prompt
# If you always want to see the prompt with a 15 second timeout:
timeout=50
#delay = 50
# Normal VGA console
vga = normal
# VESA console with size 1024x768x16:
#vga = 795
#
# End LILO global section
#
#
# Linux bootable partition config begins
#
image = /boot/vmlinuz
root = /dev/sda2
#root = /devices/discs/disc0/part3
label = Gentoo
read-only # read-only for checking
#
# Linux bootable partition config ends
#
#
# DOS bootable partition config begins
#
other = /dev/sdb1
#other = /devices/discs/disc0/part1
label = Windows
table = /dev/sdb