rendered paste bodyl:
............done
start kernel
[ohio_pre_init] System Clk = 62500000 Hz Linux version 2.6.13.1-ohio (jpluschke@EmbeddedVM) (gcc versi7
YAMON MEMORY DESCRIPTOR dump:
prom_memsize = 0x02000000
memsize=32 MByte
prom_flashsize = 0x00800000
flashsize=8 MByte
&_end=0x9420aec8 PFN_ALIGN(&_end)=0x9420b000 CPHYSADDR(PFN_ALIGN(&_end))=0x1420b000 memsize=0x2000000
[0,941e4fc0]: base<14000000> size<0020b000> type<Dont use memory>
[0,941e4fcc]: base<1420b000> size<01df5000> type<Free memmory>
prom_memsize = 0x02000000
memsize=32 MByte
prom_flashsize = 0x00800000
flashsize=8 MByte
&_end=0x9420aec8 PFN_ALIGN(&_end)=0x9420b000 CPHYSADDR(PFN_ALIGN(&_end))=0x1420b000 memsize=0x2000000
CPU revision is: 00018448
ohio_setup+0x0/0x100
[ohio_clk_init]: dsl xtal 35328000Hz lan xtal 25000000Hz
[ohio_gpio_init]
Determined physical RAM map:
memory: 0020b000 @ 14000000 (reserved)
memory: 01df5000 @ 1420b000 (usable)
On node 0 totalpages: 8192
[alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x9420e000-0x9424e020
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93f8e000-0x9424e020
DMA zone: 8192 pages, LIFO batch:3
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=ttyS0,38400n8r
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30)
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions). Base=0x941e2734
TLB synthesizer field overflow (simm)
Synthesized TLB load handler fastpath (34 instructions) Base=0x941e5760.
TLB synthesizer field overflow (simm)
Synthesized TLB store handler fastpath (34 instructions) Base=0x941e5960.
TLB synthesizer field overflow (simm)
Synthesized TLB modify handler fastpath (33 instructions) Base=0x941e5b60.
PID hash table entries: 256 (order: 8, 4096 bytes)
[ohio_set_clock_notify] avm_clock_id_cpu notify disable 0x940013f8 0x9419be18
[ohio_set_clock_notify] avm_clock_id_cpu notify enable 0x940013f8 0x9419be18
CPU frequency 211.97 MHz
Using 105.984 MHz high precision timer.
[setup_irq]: irq 127 irqaction->handler 0x94041a10 (no_action+0x0/0x8 )
[register_console] enable commandline console 0
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30324k/30676k available (1477k kernel code, 320k reserved, 342k data, 112k init, 0k highmem)
totalram_pages= 7589
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)
loops_per_jiffy=1056768
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Can't analyze prologue code at 9416fc8c
Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher
[avm] configured: watchdog eventled enable shift register enable direct gpio
gpio usage: reset=12 clock=13 store=10 data=9
AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Feb 8 2007 14:30:44)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[uart_add_one_port]
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART
[uart_add_one_port] dont rigister console port->type = 16
port->cons = 0x941a9680 port->cons->flags = 0x7
[uart_add_one_port] sucess
io scheduler noop registered
(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x200) = 0x3100
(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x200) = 0x3100
(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x220) = 0x3100
(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x220) = 0x3100
(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x240) = 0x3100
(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x240) = 0x3100
(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x260) = 0x3100
(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x260) = 0x3100
(vor) REG_ADM_LC_PHY_CONTROL_PORT(0x280) = 0x3100
(nach) REG_ADM_LC_PHY_CONTROL_PORT(0x280) = 0x3100
cpmac_if_register, dev cpmac0 (phy_id 0) registered
cpmac_if_register, phy_id 0 already registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
physmap flash device: 400000 at 10000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
RedBoot partition parsing not available
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Ohio flash driver (size->0x400000 mem->0x10000000)
flash_size=0x800000
Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Ohio flash memory: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[mtd]: set to default: jffs2_size = 0x20 * 64KByte (0x200000 Bytes)
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x4f77b8/5207992
[init_ohio_flash] find hidden filesystem size=0x6d3b00 offset=0xac500
[mtd] configure jffs2 partition
[mtd] fs_size=0x5a0000 max=0x1d0000 is=0x200000 max jffs2_size value 29
[mtd] ERROR jffs2_size too big, reduce to max
Creating 7 MTD partitions on "Ohio flash memory":
0x000ac500-0x00780000 : "filesystem"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only
0x00010000-0x00780000 : "kernel"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00000000-0x00010000 : "bootloader"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
0x00780000-0x007c0000 : "tffs (1)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
0x007c0000-0x00800000 : "tffs (2)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
0x005b0000-0x00780000 : "jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
0x00010000-0x005b0000 : "Kernel without jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
'Virtual blocks not allowed'
capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
capifs: Rev 1.1.2.3
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
mcfw_init: ok
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
[setup_irq]: irq 1 irqaction->handler 0x94001664 (dummy_timer_irq+0x0/0x14 )
[setup_irq]: irq 6 irqaction->handler 0x94001678 (dummy_system_irq_2+0x0/0x18 )
[ohio_late_init]
[ohio_set_clock_notify] avm_clock_id_system notify disable 0x9400169c 0x94279e48
[ohio_set_clock_notify] avm_clock_id_system notify enable 0x9400169c 0x94279e48
[tffs] alloc_chrdev_region() param=mtd4
[tffs] CONFIG_TFFS_MTD_DEVICE_0=4 CONFIG_TFFS_MTD_DEVICE_1=5
[tffs] Character device init successfull
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
mount on mtd4 and mtd5 (double buffering)
Adam2 environment variables API installed.
tffsd: wait for events
[prepare_namespace] new mount root /dev/mtdblock1
use lzma compression
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 112k freed (7617 free)
[setup_irq]: irq 15 irqaction->handler 0x940cf534 (serial8250_interrupt+0x0/0x128 )
init started: BusyBox v1.5.1 (2007-07-03 23:22:28 CEST) multi-call binary
rootdir=/
table='/etc/device.table'
AR7WDT: System Init UEberwachung 120 Sekunden
TFFS Name Table 8
HWRevision 101.1.1.0
ProductID Fritz_Box_SpeedportW701V
SerialNumber 0000000000000000
annex B
autoload yes
bootloaderVersion 1.203
bootserport tty0
bluetooth
cpufrequency 211968000
firstfreeaddress 0x946B1D78
firmware_version tcom
firmware_info 33.04.26
flashsize 0x00800000
maca 00:1A:4F:D8:52:FF
macb 00:1A:4F:D8:53:00
macwlan 00:1A:4F:D8:53:01
macdsl 00:1A:4F:D8:53:02
memsize 0x02000000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
mtd0 0x90000000,0x90000000
mtd1 0x90010000,0x90780000
mtd2 0x90000000,0x90010000
mtd3 0x90780000,0x907C0000
mtd4 0x907C0000,0x90800000
my_ipaddress 192.168.178.1
prompt AVM_Ar7
ptest
reserved
req_fullrate_freq 125000000
sysfrequency 125000000
urlader-version 1203
usb_board_mac 00:1A:4F:D8:53:03
usb_rndis_mac 00:1A:4F:D8:53:04
usb_device_id 0x0000
usb_revision_id 0x0000
usb_device_name USB DSL Device
usb_manufacturer_name AVM
wlan_key 0719550738185830
wlan_cal 0024,03E4,0028,00E6,010A,00E7,010A,0352,0339
HWRevision='101'
HWRevision_ATA='1'
HWRevision_BitFileCount='1'
HWRevision_Reserved1='0'
ANNEX='B'
OEM='tcom'
OEM_DEFAULT_INDEX=''
OEM_tmp='tcom'
Language='de'
Country='049'
TZ='CET-1CEST,M3.5.0,M10.5.0'
CONFIG_AB_COUNT='2'
CONFIG_ANNEX='B'
CONFIG_ASSIST='y'
CONFIG_ATA='y'
CONFIG_ATA_FULL='n'
CONFIG_AUDIO='n'
CONFIG_AURA='n'
CONFIG_BLUETOOTH='n'
CONFIG_BLUETOOTH_CTP='n'
CONFIG_BUTTON='y'
CONFIG_CAPI='y'
CONFIG_CAPI_MIPS='n'
CONFIG_CAPI_NT='n'
CONFIG_CAPI_POTS='y'
CONFIG_CAPI_TE='y'
CONFIG_CAPI_UBIK='n'
CONFIG_CAPI_XILINX='y'
CONFIG_CDROM='n'
CONFIG_CDROM_FALLBACK='n'
CONFIG_DECT='n'
CONFIG_DSL='y'
CONFIG_ENVIRONMENT_PATH='/proc/sys/urlader'
CONFIG_ETH_COUNT='4'
CONFIG_FIRMWARE_URL='http://www.telekom.de/faq'
CONFIG_FON='y'
CONFIG_HOMEI2C='n'
CONFIG_HOSTNAME='speedport.ip'
CONFIG_I2C='n'
CONFIG_INSTALL_TYPE='ar7_8MB_xilinx_4eth_2ab_isdn_pots_wlan_13200'
CONFIG_JFFS2='n'
CONFIG_LED_NO_DSL_LED='n'
CONFIG_MAILER='n'
CONFIG_MEDIACLI='n'
CONFIG_MEDIASRV='n'
CONFIG_NAND='n'
CONFIG_NFS='n'
CONFIG_OEM_DEFAULT='tcom'
CONFIG_PRODUKT='Fritz_Box_SpeedportW701V'
CONFIG_PRODUKT_NAME='Speedport W 701V'
CONFIG_RAMSIZE='32'
CONFIG_ROMSIZE='8'
CONFIG_SERVICEPORTAL_URL='none'
CONFIG_STOREUSRCFG='n'
CONFIG_SUBVERSION='ds26-pre16-878M'
CONFIG_TAM='n'
CONFIG_TAM_MODE='0'
CONFIG_TR069='y'
CONFIG_UBIK2='n'
CONFIG_UPNP='n'
CONFIG_USB='n'
CONFIG_USB_HOST_AVM='n'
CONFIG_USB_HOST_TI='n'
CONFIG_USB_PRINT_SERV='n'
CONFIG_USB_STORAGE='n'
CONFIG_USB_WLAN_AUTH='n'
CONFIG_VDSL='n'
CONFIG_VERSION='04.26'
CONFIG_VERSION_MAJOR='33'
CONFIG_VLYNQ='y'
CONFIG_VLYNQ0='0'
CONFIG_VLYNQ1='0'
CONFIG_VPN='n'
CONFIG_WLAN='y'
CONFIG_WLAN_1130TNET='n'
CONFIG_WLAN_1350TNET='y'
CONFIG_WLAN_GREEN='n'
CONFIG_WLAN_WDS='y'
CONFIG_XILINX='y'
set 'Activate Wizzard'
mknod: /var/flash/ar7.cfg: File exists
Loading /var/flash/ds_mod...done.
Loading passwords...done.
Loading hosts...done.
Loading config...done.
Loading modules...done.
cp /etc/default.049/fx_moh.default /var/fx_moh
Piglet: module license '
(C) Copyright 2005 by AVM
' taints kernel.
attempting to load DSL Firmware '/lib/modules/microvoip-dsl.bin'
**** ANNEX: 'B'
*************************************
setting DSL Firmware to Annex B
registered device TI Avalanche SAR
tiatm driver (patch_annex=0xc00519ec)
[tiatm] Set StrictPriority=0
DSP binary filesize = 303784 bytes
[setup_irq]: irq 23 irqaction->handler 0xc003920c (tn7atm_sar_irq+0x0/0x30 [tiatm] )
[setup_irq]: irq 31 irqaction->handler 0xc003923c (tn7atm_dsl_irq+0x0/0x28 [tiatm] )
[tiatm]: Powermanagment (States => 1,3,10) supported!
Texas Instruments ATM driver: version:[4.06.04.30]
ubik2 driver (ubik2 - 0x10=0xc00646b4)
atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0055c00
atm_dsp_register_ubik2: dsp mem pointer 0xa1c0f218
ubik2_init_interface: DSP-Link Version v3 8480
isdn_fbox: Loading...
isdn_fbox: Driver 'isdn_fbox' attached to stack
isdn_fbox: CAPI driver registered.
isdn_fbox: AVM F!Box expected @ port 0x0000, irq 0
isdn_fbox: Loading...
isdn_fbox: Stack version 3.11-07
isdn_fbox: D-channel 0: DSS1
isdn_fbox: D-channel 1: DSS1
isdn_fbox: D-channel 2: DSS1_N
isdn_fbox: D-channel 3: POTS
isdn_fbox: D-channel 4: SIP
isdn_fbox: Loaded.
kdsldmod: init start
kdsld: cache_create(datapipe)
kdsld: cache_create(datapipe_mod)
kdsld: cache_create(ipaccessset)
kdsld: cache_create(ipaccessrule)
kdsld: cache_create(ipfragid)
kdsld: cache_create(ipmasqentry)
kdsld: cache_create(ipmasqfwinfo)
kdsld: cache_create(ipmasqigdpm)
kdsld: cache_create(ipmasqappldata)
kdsld: cache_create(ipmasqmcgroup)
kdsld: cache_create(dnsmasqentry)
kdsld: cache_create(dnsstaticentry)
kdsld: cache_create(pingerentry)
kdsld: cache_create(pingerwaiter)
kdsld: cache_create(iprouteset)
kdsld: DATAPIPE: with header optimization
kdsldmod: init done
kdsld: PPP led: off (value=0)
2000-01-01 01:00:18 cltmgr: csock: using poll
Jan 1 01:00:18 cltmgr[420]: csock: using poll
2000-01-01 01:00:19 cltmgr: avmssl_init: done
Jan 1 01:00:19 cltmgr[420]: avmssl_init: done
2000-01-01 01:00:19 cltmgr: process priority is 19
Jan 1 01:00:19 cltmgr[420]: process priority is 19
MAC WLAN: 00:1A:4F:D8:53:01
Jan 1 01:00:20 cltmgr[422]: TR-069 is NOT ACTIVATED in tr069.cfg
Jan 1 01:00:21 cltmgr[422]: mapping to info-LED already exist
Jan 1 01:00:21 cltmgr[422]: box init ok
Jan 1 01:00:21 cltmgr[422]: FactoryDefault=/etc/default/tcom/stat.cfg (stat)
Jan 1 01:00:21 cltmgr[422]: /etc/default/tcom/stat.cfg: is empty
Jan 1 01:00:21 cltmgr[422]: load_config(stat): file empty - factory default loaded
Jan 1 01:00:21 cltmgr[422]: Statistic load_config failed
Jan 1 01:00:21 cltmgr[422]: dlopen(/usr/share/ctlmgr/libdect.so) failed: File not found
Jan 1 01:00:21 cltmgr[422]: dlopen(/usr/share/ctlmgr/libtamconf.so) failed: File not found
[speedup] disable
Jan 1 01:00:21 cltmgr[422]: dlopen(/usr/share/ctlmgr/libvdsl.so) failed: File not found
Jan 1 01:00:21 cltmgr[422]: WAN (ata) led value = 0
Jan 1 01:00:21 cltmgr[422]: TR069_Init() TR069_Init(assi-only)
Jan 1 01:00:21 cltmgr[422]: TR069_Init returned 0
Jan 1 01:00:21 cltmgr[422]: TR069_Init(lite mode) returned 0
Jan 1 01:00:21 cltmgr[422]: verbose: DISABLED
WSTART (Jul 6 2006 15:38:07)wstart: config ok(1)
wpa auth:waiting for driver to come up...
Wstart - made configure_wpa_authenticator
[Wstart] wlan_cal ist gesetzt: NVS DATEI WIRD MIT KALIBRIERUNGSWERTEN GEPATCHT!!!
[Wstart] 9 Parameter werden gepatcht:
[Wstart] NVS DATEI WURDE GEPATCHT.
NVS File loaded.
429493966: Configuration succeeded !!!
[ohio_vlynq_init] device 0
[ohio_vlynq_startup_link]
[setup_irq]: irq 29 irqaction->handler 0x94004f2c (vlynq_interrupt+0x0/0x34 )
[setup_irq]: irq 79 irqaction->handler 0xc02d7a10 (whal_acxIntrHandler+0x0/0x1e8 [tiap] )
429493973:
429493996: WDRV_MAINSM: WLAN Driver initialized successfully
429493996: FW Watchdog is Enabled
dda: tiwlan0 in initializing Succeeded wireless extensions: ret = 0
wlan started (OK)
Wstart - made configure_and_start_ap_driver
WSTART: done(0)
WLAN is enabled
tiwlan0 device is activated
wdsup0 device is activated
wdsdw0 device is activated
wdsdw1 device is activated
wdsdw2 device is activated
wdsdw3 device is activated
Jan 1 01:00:28 websrv[451]: csock: using poll
Jan 1 01:00:29 igdd[455]: csock: using poll
Jan 1 01:00:29 igdd[455]: avmssl_init: done
2000-01-01 01:00:30 multid: startup (Aug 31 2006 17:10:44)
Jan 1 01:00:30 multid[458]: startup (Aug 31 2006 17:10:44)
2000-01-01 01:00:30 multid: csock: using poll
Jan 1 01:00:30 multid[458]: csock: using poll
2000-01-01 01:00:30 multid: avmssl_init: done
Jan 1 01:00:30 multid[458]: avmssl_init: done
2000-01-01 01:00:30 dsld: csock: using poll
Jan 1 01:00:30 dsld[462]: csock: using poll
2000-01-01 01:00:30 dsld: avmssl_init: done
Jan 1 01:00:30 dsld[462]: avmssl_init: done
2000-01-01 01:00:30 dsld: startup (Jul 6 2006 15:37:07)
Jan 1 01:00:30 dsld[462]: startup (Jul 6 2006 15:37:07)
2000-01-01 01:00:30 dsld: new cpmac driver detected
Jan 1 01:00:30 dsld[462]: new cpmac driver detected
/etc/init.d/rc.net: line 1: avmike: not found
Jan 1 01:00:31 multid[[setup_irq]: irq 27 irqaction->handler 0x940e016c (460cpmac_main_isr+0x0/0x78 ]:)
new cpmac driver detected
Jan 1 01:00:31 multid[460]: enabling non-ATA-Mode
Jan 1 01:00:31 multid[46CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == c02579d0, c
0]Oops in arch/mips/mm/fault.c::do_page_fault, line 166[#1]:
Cpu 0
$ 0 : 00000000 00000066 00000001 9494bf60
$ 4 : 9494b421 c027f0e5 00000000 0000000c
$ 8 : 00707472 9494bf68 00000000 94261810
$12 : ffffffff c0259634 00200200 00100100
$16 : 9494b440 00000008 9494b420 953cf500
$20 : 00000000 9494bfc0 00420000 10000050
$24 : 00000000 c0257dcc
$28 : 94800000 94801c68 10000000 c025794c
Hi : 00000000
Lo : 00000ec0
epc : c02579d0 CTrafficShaperConfigBuilder_SetCompiledFilter+0xe0/0x164 [kdsldmod] Tainted: P
ra : c025794c CTrafficShaperConfigBuilder_SetCompiledFilter+0x5c/0x164 [kdsldmod]
Status: 1000ce03 KERNEL EXL IE
Cause : 30800008
BadVA : 00000000
PrId : 00018448
Modules linked in: tiap kdsldmod isdn_fbox ubik2 tiatm Piglet
Process dsld (pid: 464, threadinfo=94800000, task=94f3a060)
Stack : 9494bee0 00000000 00000000 c02546c8 9494b440 00000008 9494bf60 953cf500
9494b460 c0257d1c 0000000b c0257b04 95fba800 c026f544 00000000 9494b460
9494bfc0 9494b520 00000004 2aab06b0 c0257ee4 c0257e50 c029d8bc 9494b560
c0259364 c025a2e0 9494b520 00000000 c02a89f0 c02b0000 c026b678 c026b660
94801d00 c0259708 94029240 94029240 94301540 00000000 00000000 0000000f
...
Call Trace:
[<c02546c8>] limiterchain_new+0x24/0x8c [kdsldmod]
[<c0257d1c>] CTrafficShaperConfigBuilder_MakeChainFromConf+0xd8/0x188 [kdsldmod]
[<c0257b04>] CTrafficShaperConfigBuilder_MakeLimiterFromConf+0x64/0x1a4 [kdsldmod]
[<c026f544>] CTrafficShaperBuilder_AddLimiterToLink+0x24/0x7c [kdsldmod]
[<c0257ee4>] CTrafficShaperConfigBuilder_Build+0x118/0x174 [kdsldmod]
[<c0257e50>] CTrafficShaperConfigBuilder_Build+0x84/0x174 [kdsldmod]
[<c0259364>] copy_members_from_user+0x54/0x84 [kdsldmod]
[<c025a2e0>] config_allocstruct_no_defaults+0x30/0xbc [kdsldmod]
[<c02b0000>] wdrv_dbSetStationRates+0x22c/0x4a0 [tiap]
[<c026b678>] trafficshaper_create_and_configure+0x74/0x1e0 [kdsldmod]
[<c026b660>] trafficshaper_create_and_configure+0x5c/0x1e0 [kdsldmod]
[<c0259708>] copy_struct_from_user+0xd4/0x174 [kdsldmod]
[<94029240>] do_softirq+0x58/0x8c
[<94029240>] do_softirq+0x58/0x8c
[<c0259840>] config_copystruct_from_user+0x98/0xac [kdsldmod]
[<c0232c38>] kdsld_ioctl+0x20e0/0x21ac [kdsldmod]
[<94041be4>] __do_IRQ+0xf4/0x160
[<94001508>] ohio_hw0_irqdispatch+0xd8/0xec
[<941e0000>] ip_auto_config+0x3b0/0x1140
[<94000f88>] mips_irq_check_hw_interrupt_0+0x10/0x18
[<94011b9c>] r4k_flush_icache_page+0x1d4/0x1f4
[<941e0000>] ip_auto_config+0x3b0/0x1140
[<940200bc>] __wake_up+0x40/0x7c
[<9402961c>] tasklet_action+0x88/0xdc
[<94029240>] do_softirq+0x58/0x8c
[<9402915c>] __do_softirq+0x6c/0xf8
[<94029138>] __do_softirq+0x48/0xf8
[<94029240>] do_softirq+0x58/0x8c
[<94000f88>] mips_irq_check_hw_interrupt_0+0x10/0x18
[<94072474>] do_ioctl+0x64/0x78
[<940727c4>] vfs_ioctl+0x33c/0x35c
[<94072834>] sys_ioctl+0x50/0x8c
[<9400ce20>] stack_done+0x20/0x3c
[<9400cdec>] handle_sys+0xac/0xc0
Code: 08095e8d ae600018 ae620018 <8e910000> 3c029405 24050020 2442c2c4 0040f809 02202021
: Kernel panic - not syncing: Aiee, killing interrupt handler!
no rm<0>Rebooting in 5 seconds..al
Jan 1 01:00:31 dsld[464]: DSL Mac 00:1a:4f:d8:53:02
Jan 1 01:00:31 dsld[464]: VOIP Mac 00:1a:4f:d8:53:03
Jan 1 01:00:31 dsld[464]: voip: ppptarget voip disabled, ignored
CTRL-A Z for help | 38400 8N1 | NOR | Minicom 2.2 | VT102 | Offline