All pastes #632014 Raw Edit

WP54G-WRT jffs2

public text v1 · immutable
#632014 ·published 2007-07-24 15:06 UTC
rendered paste body
CFE version 1.2.5 for WP54G (32bit,SP,LE,MIPS)
Build Date: Wed Aug 16 09:09:30 SGT 2006 (ttyaw@linux01)

Initializing Arena.
Initializing PCI. [normal]
PCI bus 0 slot 0/0: ADMtek ADM5120 Host Bridge (host bridge)
Initializing Devices.
CPU type 0x1800B: 175MHz
Total memory: 0x1000000 bytes (16MB)

Total memory used by CFE:  0x80F83000 - 0x80FFFAE0 (510688)
Initialized Data:          0x80FBA824 - 0x80FBCA50 (8748)
BSS Area:                  0x80FBCA50 - 0x80FBDAE0 (4240)
Local Heap:                0x80FBDAE0 - 0x80FFDAE0 (262144)
Stack Area:                0x80FFDAE0 - 0x80FFFAE0 (8192)
Text (code) segment:       0x80F83000 - 0x80FBA115 (225557)
Boot area (physical):      0x00F42000 - 0x00F82000
Relocation Factor:         I:E1383000 - D:E1383000

Press Ctrl-C to cancel automatic startup
CFE> ifconfig eth0 -addr=192.168.0.10
Device eth0:  hwaddr 02-10-18-58-36-10, ipaddr 192.168.0.10, mask not set
        gateway not set, nameserver not set
*** command status = 0
CFE> flash -noheader 192.168.0.50:openwrt-adm5120-2.6-jffs2-wp54g-wrt.trx flash1.trx
Reading 192.168.0.50:openwrt-adm5120-2.6-jffs2-wp54g-wrt.trx: Done. 2560000 bytes rea
d


** DO NOT TURN OFF YOUR MACHINE UNTIL THE FLASH UPDATE COMPLETES!! **

Programming...done. 2560000 bytes written
*** command status = 0
CFE> reset


CFE version 1.2.5 for WP54G (32bit,SP,LE,MIPS)
Build Date: Wed Aug 16 09:09:30 SGT 2006 (ttyaw@linux01)

Initializing Arena.
Initializing PCI. [normal]
PCI bus 0 slot 0/0: ADMtek ADM5120 Host Bridge (host bridge)
Initializing Devices.
CPU type 0x1800B: 175MHz
Total memory: 0x1000000 bytes (16MB)

Total memory used by CFE:  0x80F83000 - 0x80FFFAE0 (510688)
Initialized Data:          0x80FBA824 - 0x80FBCA50 (8748)
BSS Area:                  0x80FBCA50 - 0x80FBDAE0 (4240)
Local Heap:                0x80FBDAE0 - 0x80FFDAE0 (262144)
Stack Area:                0x80FFDAE0 - 0x80FFFAE0 (8192)
Text (code) segment:       0x80F83000 - 0x80FBA115 (225557)
Boot area (physical):      0x00F42000 - 0x00F82000
Relocation Factor:         I:E1383000 - D:E1383000

Press Ctrl-C to cancel automatic startup
Loader:raw Filesys:raw Dev:flash1.trx File:0x1c Options:(null)
Loading: ... 4960 bytes read
Entry at 0x80001000
Starting program at 0x80001000



LZMA loader for WP54G-WRT, Copyright (C) 2007 OpenWrt.org

Looking for TRX header... found at 0xBFC50000, kernel in partition 1
decompressing kernel... done!
launching kernel...

mem_detect: disable buffers for both banks
mem_detect: checking for 64MB chip in 1st bank
mem_detect: write 0x55555555 to 0xA0000000
mem_detect: delay 10000 ns
mem_detect: pattern at 0xA1000000 is 0x55555555
mem_detect: mirrored data found at offset 0x1000000
mem_detect: chip size in 1st bank is 16MB
mem_detect: enable buffers for both banks
mem_detect: 1x16MB memory found
Linux version 2.6.22 (yuhi@idared) (gcc version 4.1.2) #3 Mon Jul 23 15:39:27 CEST 20
07
ADM5120 revision 8, running at 175MHz
Boot loader is: Unknown
Booted from   : NOR flash
Board is      : Compex WP54G-WRT
Memory size   : 16MB
CPU revision is: 0001800b
ADM5120 board setup
Determined physical RAM map:
 memory: 00d32000 @ 002ce000 (usable)
Wasting 22976 bytes for tracking 718 unused pages
Initrd not found or empty - disabling initrd
Built 1 zonelists.  Total pages: 4064
Kernel command line: console=ttyS0,115200 rootfs=jffs2,squashfs,yaffs2 init=/etc/prei
nit
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Using 87.500 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13364k/13512k available (2263k kernel code, 148k reserved, 356k data, 132k in
it, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
adm5120: system has PCI BIOS
registering PCI controller with io_map_base unset
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
yaffs Jul 23 2007 14:52:32 Installing.
io scheduler noop registered
io scheduler deadline registered (default)
ttyS0 at I/O 0x12600000 (irq = 9) is a ADM5120
ttyS1 at I/O 0x12800000 (irq = 10) is a ADM5120
eth0: ADM5120 switch port0
eth1: ADM5120 switch port1
adm5120 : flash init : 0x1fc00000 0x00400000
adm5120 physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x400000 at 0x1fc00000
adm5120 : using CFE flash mapping
bootloader size: 327680
Updating TRX offsets and length:
old trx = [0x0000001c, 0x00000be0, 0x000e0000], len=0x00271000 crc32=0xdc291535
new trx = [0x0000001c, 0x00000be0, 0x000e0000], len=0x000e0000 crc32=0x49c5e2b9
Done
Creating 4 MTD partitions on "adm5120 physically mapped flash":
0x00000000-0x00050000 : "cfe"
0x00050000-0x003f0000 : "linux"
0x00130000-0x003f0000 : "rootfs"
0x003f0000-0x00400000 : "nvram"
block2mtd: version $Revision: 1.30 $
RB1xx nand
No NAND device found!!!
No NAND device found!!!
No NAND device found!!!
No NAND device found!!!
RB1xxx nand device not found
GPIO LEDs driver registered
Registered led device: diag
Registered led device: wlan
Registered led device: wan
Registered led device: lan1
Registered led device: lan2
nf_conntrack version 0.5.0 (105 buckets, 840 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: MTD device is not NAND it's type 3
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs: MTD device is not NAND it's type 3
List of all partitions:
1f00        320 mtdblock0 (driver?)
1f01       3712 mtdblock1 (driver?)
1f02       2816 mtdblock2 (driver?)
1f03         64 mtdblock3 (driver?)
No filesystem could mount root, tried:  squashfs yaffs yaffs2
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,2)