rendered paste bodyMyth:~# lspci -tv
-[0000:00]-+-00.0 Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface
+-02.0 Intel Corporation 82865G Integrated Graphics Controller
+-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
+-1d.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
+-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
+-1e.0-[0000:01]--+-02.0 Philips Semiconductors SAA7146
| \-08.0 Intel Corporation 82562EZ 10/100 Ethernet Controller
+-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
+-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
+-1f.2 Intel Corporation 82801EB (ICH5) SATA Controller
+-1f.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
\-1f.5 Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
Myth:~# dmesg
accel = 1, hwcursor = 0, fixed = 0, noinit = 0
intelfb: options: mode = ""
intelfb: intelfb_set_fbinfo
intelfb: intelfb_init_var
intelfb: intelfb_check_var: accel_flags is 0
intelfb: Mode is interlaced.
intelfb: intelfb_check_var: accel_flags is 0
intelfb: intelfb_var_to_depth: bpp: 32, green.length is 0
intelfb: intelfb_check_var: accel_flags is 0
intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8
intelfb: Initial video mode is 1024x768-32@70.
intelfb: Initial video mode is from 1.
intelfb: update_dinfo
intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8
intelfb: I2C bus CRTDDC_A registered.
intelfb: I2C bus DVODDC_D registered.
intelfb: I2C bus DVOI2C_E registered.
intelfb: intelfbhw_print_hw_state
hw state dump start
VGA0_DIVISOR: 0x00021207
VGA1_DIVISOR: 0x00031406
VGAPD: 0x0000888b
VGA0: (m1, m2, n, p1, p2) = (18, 7, 2, 0, 0)
VGA0: clock is 327000
VGA1: (m1, m2, n, p1, p2) = (20, 6, 3, 0, 0)
VGA1: clock is 283200
DPLL_A: 0xc08b0000
DPLL_B: 0x00000000
FPA0: 0x00021207
FPA1: 0x00021207
FPB0: 0x00000000
FPB1: 0x00000000
PLLA0: (m1, m2, n, p1, p2) = (18, 7, 2, 11, 1)
PLLA0: clock is 25153
PLLA1: (m1, m2, n, p1, p2) = (18, 7, 2, 11, 1)
PLLA1: clock is 25153
HTOTAL_A: 0x031f027f
HBLANK_A: 0x03170287
HSYNC_A: 0x02ef028f
VTOTAL_A: 0x020c01df
VBLANK_A: 0x020401e7
VSYNC_A: 0x01eb01e9
SRC_SIZE_A: 0x00000000
BCLRPAT_A: 0x00000000
HTOTAL_B: 0x00000000
HBLANK_B: 0x00000000
HSYNC_B: 0x00000000
VTOTAL_B: 0x00000000
VBLANK_B: 0x00000000
VSYNC_B: 0x00000000
SRC_SIZE_B: 0x00000000
BCLRPAT_B: 0x00000000
ADPA: 0x80008018
DVOA: 0x00000000
DVOB: 0x00000000
DVOC: 0x00000000
DVOA_SRCDIM: 0x00000000
DVOB_SRCDIM: 0x002d0190
DVOC_SRCDIM: 0x002d0190
LVDS: 0x00000000
PIPEACONF: 0x80000000
PIPEBCONF: 0x00000000
DISPARB: 0x0000005f
CURSOR_A_CONTROL: 0x00000000
CURSOR_B_CONTROL: 0x00000000
CURSOR_A_BASEADDR: 0x00000000
CURSOR_B_BASEADDR: 0x00000000
CURSOR_A_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000
CURSOR_B_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000
CURSOR_SIZE: 0x00000000
DSPACNTR: 0x00000000
DSPBCNTR: 0x00000000
DSPABASE: 0x00000000
DSPBBASE: 0x00000000
DSPASTRIDE: 0x00000000
DSPBSTRIDE: 0x00000000
VGACNTRL: 0x0000008e
ADD_ID: 0x000000ff
SWF00 0x00000000
SWF01 0x00000000
SWF02 0x00000000
SWF03 0x00000000
SWF04 0x00000000
SWF05 0x00000000
SWF06 0x00000000
SWF10 0x00000001
SWF11 0x00000000
SWF12 0x00000000
SWF13 0x03030000
SWF14 0xc0000000
SWF15 0x00000001
SWF16 0x00000000
SWF30 0x00000000
SWF31 0x00000000
SWF32 0x00000000
FENCE0 0x00000000
FENCE1 0x00000000
FENCE2 0x00000000
FENCE3 0x00000000
FENCE4 0x00000000
FENCE5 0x00000000
FENCE6 0x00000000
FENCE7 0x00000000
INSTPM 0x00000000
MEM_MODE 0x00000000
FW_BLC_0 0x01080108
FW_BLC_1 0x00000108
HWSTAM 0xffff
IER 0x0000
IIR 0x0000
IMR 0xffff
hw state dump end
intelfb: intelfb_set_par (1024x768-32)
intelfb: intelfbhw_mode_to_hw
intelfb: Clock is 75001
intelfb: p range is 4-16 (4)
intelfb: m, n, p: 137 (22,15), 11 (9), 8 (0,1), f: 74727 (74727), VCO: 597816
intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8
intelfb: H: act 1024, ss 1048, se 1184, tot 1328 bs 1024, be 1328
intelfb: V: act 768, ss 771, se 777, tot 806 bs 768, be 778
intelfb: pitch is 4096
intelfb: intelfbhw_print_hw_state
hw state dump start
VGA0_DIVISOR: 0x00021207
VGA1_DIVISOR: 0x00031406
VGAPD: 0x0000888b
VGA0: (m1, m2, n, p1, p2) = (18, 7, 2, 0, 0)
VGA0: clock is 327000
VGA1: (m1, m2, n, p1, p2) = (20, 6, 3, 0, 0)
VGA1: clock is 283200
DPLL_A: 0xd0800000
DPLL_B: 0x00000000
FPA0: 0x0009160f
FPA1: 0x0009160f
FPB0: 0x00000000
FPB1: 0x00000000
PLLA0: (m1, m2, n, p1, p2) = (22, 15, 9, 0, 1)
PLLA0: clock is 74727
PLLA1: (m1, m2, n, p1, p2) = (22, 15, 9, 0, 1)
PLLA1: clock is 74727
HTOTAL_A: 0x052f03ff
HBLANK_A: 0x052f03ff
HSYNC_A: 0x049f0417
VTOTAL_A: 0x032502ff
VBLANK_A: 0x030902ff
VSYNC_A: 0x03080302
SRC_SIZE_A: 0x03ff02ff
BCLRPAT_A: 0x00000000
HTOTAL_B: 0x00000000
HBLANK_B: 0x00000000
HSYNC_B: 0x00000000
VTOTAL_B: 0x00000000
VBLANK_B: 0x00000000
VSYNC_B: 0x00000000
SRC_SIZE_B: 0x00000000
BCLRPAT_B: 0x00000000
ADPA: 0x80000000
DVOA: 0x00000000
DVOB: 0x00000000
DVOC: 0x00000000
DVOA_SRCDIM: 0x00000000
DVOB_SRCDIM: 0x00000000
DVOC_SRCDIM: 0x00000000
LVDS: 0x00000000
PIPEACONF: 0x80000000
PIPEBCONF: 0x00000000
DISPARB: 0x0000005f
CURSOR_A_CONTROL: 0x00000000
CURSOR_B_CONTROL: 0x00000000
CURSOR_A_BASEADDR: 0x00000000
CURSOR_B_BASEADDR: 0x00000000
CURSOR_A_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000
CURSOR_B_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000
CURSOR_SIZE: 0x00000000
DSPACNTR: 0x98000000
DSPBCNTR: 0x00000000
DSPABASE: 0x00000000
DSPBBASE: 0x00000000
DSPASTRIDE: 0x00001000
DSPBSTRIDE: 0x00000000
VGACNTRL: 0x8000008e
ADD_ID: 0x000000ff
SWF00 0x00000000
SWF01 0x00000000
SWF02 0x00000000
SWF03 0x00000000
SWF04 0x00000000
SWF05 0x00000000
SWF06 0x00000000
SWF10 0x00000001
SWF11 0x00000000
SWF12 0x00000000
SWF13 0x03030000
SWF14 0xc0000000
SWF15 0x00000001
SWF16 0x00000000
SWF30 0x00000000
SWF31 0x00000000
SWF32 0x00000000
FENCE0 0x00000000
FENCE1 0x00000000
FENCE2 0x00000000
FENCE3 0x00000000
FENCE4 0x00000000
FENCE5 0x00000000
FENCE6 0x00000000
FENCE7 0x00000000
INSTPM 0x00000000
MEM_MODE 0x00000000
FW_BLC_0 0x01080108
FW_BLC_1 0x00000108
HWSTAM 0xffff
IER 0x0000
IIR 0x0000
IMR 0xffff
hw state dump end
intelfb: update_dinfo
intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8
Console: switching to colour frame buffer device 128x48
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
e100: eth0: e100_probe: addr 0xff900000, irq 5, MAC addr 00:13:20:DD:C2:B6
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 7Y250P0, ATA DISK drive
hdb: HL-DT-ST GCE-8520B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 >
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
TCP cubic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 12369938
ext3_orphan_cleanup: deleting unreferenced inode 12369931
ext3_orphan_cleanup: deleting unreferenced inode 12369930
ext3_orphan_cleanup: deleting unreferenced inode 12369928
ext3_orphan_cleanup: deleting unreferenced inode 12369927
EXT3-fs: hda1: 5 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 132k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000c800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000cc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000d000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 11, io base 0x0000d400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 9, io mem 0xffa80000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
usb 1-2: unable to read config index 0 descriptor/all
usb 1-2: can't read configurations, error -71
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50152 usecs
intel8x0: clocking to 48000
usb 1-2: new full speed USB device using uhci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
Adding 1453840k swap on /dev/hda5. Priority:-1 extents:1 across:1453840k
EXT3 FS on hda1, internal journal
NET: Registered protocol family 17
Capability LSM initialized
ACPI: Processor [CPU1] (supports 8 throttling states)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
intelfb: intelfb_check_var: accel_flags is 1
intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8
intelfb: intelfb_set_par (1024x768-32)
intelfb: intelfbhw_mode_to_hw
intelfb: Clock is 75001
intelfb: p range is 4-16 (4)
intelfb: m, n, p: 137 (22,15), 11 (9), 8 (0,1), f: 74727 (74727), VCO: 597816
intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8
intelfb: H: act 1024, ss 1048, se 1184, tot 1328 bs 1024, be 1328
intelfb: V: act 768, ss 771, se 777, tot 806 bs 768, be 778
intelfb: pitch is 4096
intelfb: intelfbhw_print_hw_state
hw state dump start
VGA0_DIVISOR: 0x00021207
VGA1_DIVISOR: 0x00031406
VGAPD: 0x0000888b
VGA0: (m1, m2, n, p1, p2) = (18, 7, 2, 0, 0)
VGA0: clock is 327000
VGA1: (m1, m2, n, p1, p2) = (20, 6, 3, 0, 0)
VGA1: clock is 283200
DPLL_A: 0xd0800000
DPLL_B: 0x00000000
FPA0: 0x0009160f
FPA1: 0x0009160f
FPB0: 0x00000000
FPB1: 0x00000000
PLLA0: (m1, m2, n, p1, p2) = (22, 15, 9, 0, 1)
PLLA0: clock is 74727
PLLA1: (m1, m2, n, p1, p2) = (22, 15, 9, 0, 1)
PLLA1: clock is 74727
HTOTAL_A: 0x052f03ff
HBLANK_A: 0x052f03ff
HSYNC_A: 0x049f0417
VTOTAL_A: 0x032502ff
VBLANK_A: 0x030902ff
VSYNC_A: 0x03080302
SRC_SIZE_A: 0x03ff02ff
BCLRPAT_A: 0x00000000
HTOTAL_B: 0x00000000
HBLANK_B: 0x00000000
HSYNC_B: 0x00000000
VTOTAL_B: 0x00000000
VBLANK_B: 0x00000000
VSYNC_B: 0x00000000
SRC_SIZE_B: 0x00000000
BCLRPAT_B: 0x00000000
ADPA: 0x80000000
DVOA: 0x00000000
DVOB: 0x00000000
DVOC: 0x00000000
DVOA_SRCDIM: 0x00000000
DVOB_SRCDIM: 0x003ff2ff
DVOC_SRCDIM: 0x003ff2ff
LVDS: 0x00000000
PIPEACONF: 0x80000000
PIPEBCONF: 0x00000000
DISPARB: 0x0000005f
CURSOR_A_CONTROL: 0x00000000
CURSOR_B_CONTROL: 0x00000000
CURSOR_A_BASEADDR: 0x00000000
CURSOR_B_BASEADDR: 0x00000000
CURSOR_A_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000
CURSOR_B_PALETTE: 0x00000000, 0x00000000, 0x00000000, 0x00000000
CURSOR_SIZE: 0x00000000
DSPACNTR: 0x98000000
DSPBCNTR: 0x00000000
DSPABASE: 0x00000000
DSPBBASE: 0x00000000
DSPASTRIDE: 0x00001000
DSPBSTRIDE: 0x00000000
VGACNTRL: 0x8000008e
ADD_ID: 0x000000ff
SWF00 0x00000000
SWF01 0x00000000
SWF02 0x00000000
SWF03 0x00000000
SWF04 0x00000000
SWF05 0x00000000
SWF06 0x00000000
SWF10 0x00000001
SWF11 0x00000000
SWF12 0x00000000
SWF13 0x03030000
SWF14 0xc0000000
SWF15 0x00000001
SWF16 0x00000000
SWF30 0x00000000
SWF31 0x00000000
SWF32 0x00000000
FENCE0 0x00000000
FENCE1 0x00000000
FENCE2 0x00000000
FENCE3 0x00000000
FENCE4 0x00000000
FENCE5 0x00000000
FENCE6 0x00000000
FENCE7 0x00000000
INSTPM 0x00000000
MEM_MODE 0x00000000
FW_BLC_0 0x01080108
FW_BLC_1 0x00000108
HWSTAM 0xffff
IER 0x0000
IIR 0x0000
IMR 0xffff
hw state dump end
intelfb: update_dinfo
intelfb: intelfb_var_to_depth: bpp: 32, green.length is 8