rendered paste bodyHello!
Notebook IBM ThinkPad T30, TEAC DW 28-E (SCSI)
Linux taliann-laptop 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux
OS Linux - Ubuntu 7.04 Feisty Fawn
dmesg:
[ 43.564000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 43.564000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 43.836000] [drm] Setting GART location based on new memory map
[ 43.836000] [drm] writeback test succeeded in 1 usecs
[ 44.320000] Non-volatile memory driver v1.2
[ 44.436000] input: /usr/sbin/thinkpad-keys as /class/input/input8
[ 44.656000] IBM machine detected. Enabling interrupts during APM calls.
[ 44.656000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 44.656000] apm: overridden by ACPI.
[ 55.404000] eth0: no IPv6 routers present
[ 7434.384000] cdrom: This disc doesn't have any tracks I recognize!
[ 7829.044000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 7829.096000] ISO 9660 Extensions: RRIP_1991A
[ 9059.176000] cdrom: This disc doesn't have any tracks I recognize!
[11769.516000] cdrom: This disc doesn't have any tracks I recognize!
[11855.620000] ISO 9660 Extensions: Microsoft Joliet Level 3
[11855.644000] ISO 9660 Extensions: RRIP_1991A
[12497.412000] cdrom: This disc doesn't have any tracks I recognize!
[12790.332000] cdrom: This disc doesn't have any tracks I recognize!
[13668.176000] cdrom: This disc doesn't have any tracks I recognize!
[14489.752000] cdrom: This disc doesn't have any tracks I recognize!
anicka@taliann-laptop:~$ dmesg
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000fe60000 end: 000000000ff60000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000ff60000 size: 000000000001a000 end: 000000000ff7a000 type: 3
[ 0.000000] copy_e820_map() start: 000000000ff7a000 size: 0000000000002000 end: 000000000ff7c000 type: 4
[ 0.000000] copy_e820_map() start: 000000000ff7c000 size: 0000000000084000 end: 0000000010000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ff60000 (usable)
[ 0.000000] BIOS-e820: 000000000ff60000 - 000000000ff7a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ff7a000 - 000000000ff7c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000ff7c000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65376) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65376
[ 0.000000] HighMem 65376 -> 65376
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65376
[ 0.000000] On node 0 totalpages: 65376
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 478 pages used for memmap
[ 0.000000] Normal zone: 60802 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v002 IBM ) @ 0x000f7020
[ 0.000000] ACPI: XSDT (v001 IBM TP-1I 0x00001012 LTP 0x00000000) @ 0x0ff6f3b4
[ 0.000000] ACPI: FADT (v001 IBM TP-1I 0x00001012 IBM 0x00000001) @ 0x0ff6f3f8
[ 0.000000] ACPI: SSDT (v001 IBM TP-1I 0x00001012 MSFT 0x0100000d) @ 0x0ff6f4ac
[ 0.000000] ACPI: ECDT (v001 IBM TP-1I 0x00001012 IBM 0x00000001) @ 0x0ff79f87
[ 0.000000] ACPI: BOOT (v001 IBM TP-1I 0x00001012 LTP 0x00000001) @ 0x0ff79fd8
[ 0.000000] ACPI: DSDT (v001 IBM TP-1I 0x00001012 MSFT 0x0100000d) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000)
[ 0.000000] Detected 1598.709 MHz processor.
[ 4.682878] Built 1 zonelists. Total pages: 64866
[ 4.682885] Kernel command line: root=UUID=370a6122-6183-440e-84b5-d8a2b244e2ce ro quiet splash locale=cs_CZ
[ 4.683169] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 4.683181] mapped APIC to ffffd000 (0120a000)
[ 4.683186] Enabling fast FPU save and restore... done.
[ 4.683191] Enabling unmasked SIMD FPU exception support... done.
[ 4.683209] Initializing CPU#0
[ 4.683314] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 4.685075] Console: colour VGA+ 80x25
[ 4.685323] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 4.685543] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 4.695694] Memory: 248248k/261504k available (1992k kernel code, 12708k reserved, 900k data, 328k init, 0k highmem)
[ 4.695710] virtual kernel memory layout:
[ 4.695711] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 4.695713] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 4.695715] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 4.695717] lowmem : 0xc0000000 - 0xcff60000 ( 255 MB)
[ 4.695718] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 4.695720] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 4.695722] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 4.695727] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 4.775249] Calibrating delay using timer specific routine.. 3200.95 BogoMIPS (lpj=6401905)
[ 4.775324] Security Framework v1.0.0 initialized
[ 4.775335] SELinux: Disabled at boot.
[ 4.775361] Mount-cache hash table entries: 512
[ 4.775601] CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.775621] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 4.775626] CPU: L2 cache: 512K
[ 4.775630] CPU: Hyper-Threading is disabled
[ 4.775633] CPU: After all inits, caps: 3febf9ff 00000000 00000000 00003080 00000000 00000000 00000000
[ 4.775651] Compat vDSO mapped to ffffe000.
[ 4.775656] Remapping vsyscall page to ffffe000
[ 4.775677] Checking 'hlt' instruction... OK.
[ 4.791452] SMP alternatives: switching to UP code
[ 4.791804] Freeing SMP alternatives: 11k freed
[ 4.792173] Early unpacking initramfs... done
[ 5.301901] ACPI: Core revision 20060707
[ 5.302181] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 5.308791] ACPI: setting ELCR to 0200 (from 0800)
[ 5.435377] CPU0: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04
[ 5.435388] SMP motherboard not detected.
[ 5.435392] Local APIC not detected. Using dummy APIC emulation.
[ 5.435451] Brought up 1 CPUs
[ 5.435868] Booting paravirtualized kernel on bare hardware
[ 5.435964] Time: 19:09:00 Date: 06/19/107
[ 5.436012] NET: Registered protocol family 16
[ 5.436165] EISA bus registered
[ 5.436174] ACPI: bus type pci registered
[ 5.436264] PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
[ 5.436268] PCI: Using configuration type 1
[ 5.436271] Setting up standard PCI resources
[ 5.440952] ACPI Exception (acpi_ec-0908): AE_NOT_FOUND, Could not use ECDT [20060707]
[ 5.447600] ACPI Error (evregion-0317): No handler for Region [ECOR] (ce55d72c) [EmbeddedControl] [20060707]
[ 5.447610] ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20060707]
[ 5.447619] ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20060707]
[ 5.447629] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.FDC_._INI] (Node ce56d8b0), AE_NOT_EXIST
[ 5.447731] ACPI Error (evregion-0317): No handler for Region [ECOR] (ce55d72c) [EmbeddedControl] [20060707]
[ 5.447740] ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20060707]
[ 5.447750] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.EC__._INI] (Node ce569b6c), AE_NOT_EXIST
[ 5.449388] ACPI: Interpreter enabled
[ 5.449392] ACPI: Using PIC for interrupt routing
[ 5.450547] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.451394] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.452229] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.453059] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.453895] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 5.454646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 5.455432] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 5.456192] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 5.456764] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 5.456772] PCI: Probing PCI hardware (bus 00)
[ 5.458900] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 5.458906] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 5.459306] Boot video device is 0000:01:00.0
[ 5.459540] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 5.459640] PCI: Transparent bridge - 0000:00:1e.0
[ 5.459839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 5.466615] ACPI: Power Resource [PUBS] (on)
[ 5.467818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 5.468257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 5.471684] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 5.471704] pnp: PnP ACPI init
[ 5.478096] pnp: PnP ACPI: found 13 devices
[ 5.478104] PnPBIOS: Disabled by ACPI PNP
[ 5.478197] PCI: Using ACPI for IRQ routing
[ 5.478203] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 5.492306] NET: Registered protocol family 8
[ 5.492310] NET: Registered protocol family 20
[ 5.493655] PCI: Bridge: 0000:00:01.0
[ 5.493662] IO window: 3000-3fff
[ 5.493669] MEM window: d0100000-d01fffff
[ 5.493675] PREFETCH window: e8000000-efffffff
[ 5.493689] PCI: Bus 3, cardbus bridge: 0000:02:00.0
[ 5.493694] IO window: 00004000-000040ff
[ 5.493700] IO window: 00004400-000044ff
[ 5.493708] PREFETCH window: f0000000-f3ffffff
[ 5.493715] MEM window: d4000000-d7ffffff
[ 5.493723] PCI: Bus 7, cardbus bridge: 0000:02:00.1
[ 5.493727] IO window: 00004800-000048ff
[ 5.493734] IO window: 00004c00-00004cff
[ 5.493741] PREFETCH window: f4000000-f7ffffff
[ 5.493749] MEM window: d8000000-dbffffff
[ 5.493756] PCI: Bridge: 0000:00:1e.0
[ 5.493762] IO window: 4000-8fff
[ 5.493770] MEM window: d0200000-dfffffff
[ 5.493778] PREFETCH window: f0000000-f7ffffff
[ 5.493803] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 5.494448] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 5.494453] PCI: setting IRQ 11 as level-triggered
[ 5.494458] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 5.495085] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 5.495089] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 5.495141] NET: Registered protocol family 2
[ 5.534769] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 5.534903] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 5.534963] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 5.534994] TCP: Hash tables configured (established 8192 bind 4096)
[ 5.534998] TCP reno registered
[ 5.546833] checking if image is initramfs... it is
[ 6.547723] Freeing initrd memory: 6752k freed
[ 6.548049] Simple Boot Flag at 0x35 set to 0x1
[ 6.548347] audit: initializing netlink socket (disabled)
[ 6.548370] audit(1184872141.928:1): initialized
[ 6.548596] VFS: Disk quotas dquot_6.5.1
[ 6.548626] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 6.548705] io scheduler noop registered
[ 6.548710] io scheduler anticipatory registered
[ 6.548714] io scheduler deadline registered
[ 6.548727] io scheduler cfq registered (default)
[ 6.549139] isapnp: Scanning for PnP cards...
[ 6.902567] isapnp: No Plug & Play device found
[ 6.945191] Real Time Clock Driver v1.12ac
[ 6.945279] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 6.947158] pnp: Device 00:0a activated.
[ 6.947419] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 6.947823] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 6.947838] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 6.947952] mice: PS/2 mouse device common for all mice
[ 6.948926] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 6.949325] input: Macintosh mouse button emulation as /class/input/input0
[ 6.949388] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 6.949395] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 6.949766] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 6.957531] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.957541] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.957796] EISA: Probing bus 0 at eisa.0
[ 6.957806] Cannot allocate resource for EISA slot 1
[ 6.957811] Cannot allocate resource for EISA slot 2
[ 6.957814] Cannot allocate resource for EISA slot 3
[ 6.957818] Cannot allocate resource for EISA slot 4
[ 6.957821] Cannot allocate resource for EISA slot 5
[ 6.957825] Cannot allocate resource for EISA slot 6
[ 6.957828] Cannot allocate resource for EISA slot 7
[ 6.957832] Cannot allocate resource for EISA slot 8
[ 6.957835] EISA: Detected 0 cards.
[ 6.987965] TCP cubic registered
[ 6.987978] NET: Registered protocol family 1
[ 6.988015] Using IPI No-Shortcut mode
[ 6.988128] ACPI: (supports S0 S3 S4 S5)
[ 6.988202] Magic number: 15:66:193
[ 6.988291] hash matches device ttys5
[ 6.988959] Freeing unused kernel memory: 328k freed
[ 6.989497] Time: tsc clocksource has been installed.
[ 6.991062] input: AT Translated Set 2 keyboard as /class/input/input1
[ 8.448537] Capability LSM initialized
[ 9.265236] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 9.265248] ACPI: Processor [CPU] (supports 8 throttling states)
[ 9.268030] ACPI: Thermal Zone [THM0] (55 C)
[ 10.268809] usbcore: registered new interface driver usbfs
[ 10.268852] usbcore: registered new interface driver hub
[ 10.268891] usbcore: registered new device driver usb
[ 10.270603] USB Universal Host Controller Interface driver v3.0
[ 10.270680] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 10.270700] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 10.270706] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 10.270948] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 10.270980] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 10.271160] usb usb1: configuration #1 chosen from 1 choice
[ 10.271211] hub 1-0:1.0: USB hub found
[ 10.271223] hub 1-0:1.0: 2 ports detected
[ 10.375737] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 10.375744] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 10.375762] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 10.375768] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 10.375807] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 10.375839] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 10.375994] usb usb2: configuration #1 chosen from 1 choice
[ 10.376038] hub 2-0:1.0: USB hub found
[ 10.376050] hub 2-0:1.0: 2 ports detected
[ 10.479687] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 10.479695] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 10.479715] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 10.479721] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 10.479761] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 10.479793] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 10.479944] usb usb3: configuration #1 chosen from 1 choice
[ 10.479989] hub 3-0:1.0: USB hub found
[ 10.480002] hub 3-0:1.0: 2 ports detected
[ 10.551084] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 10.551090] e100: Copyright(c) 1999-2006 Intel Corporation
[ 10.594499] SCSI subsystem initialized
[ 10.598900] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[ 10.598908] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[ 10.639372] libata version 2.20 loaded.
[ 10.665621] Floppy drive(s): fd0 is 1.44M
[ 10.676021] e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:09:6B:90:19:B7
[ 10.680131] ata_piix 0000:00:1f.1: version 2.10ac1
[ 10.680154] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 10.680167] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 10.680198] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 10.680281] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
[ 10.680328] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
[ 10.680365] scsi0 : ata_piix
[ 10.717319] FDC 0 is a National Semiconductor PC87306
[ 6.028000] Time: acpi_pm clocksource has been installed.
[ 6.044000] ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080
[ 6.044000] ata1.00: ATA-5: HITACHI_DK23EA-20B, 00K5A0B6, max UDMA/100
[ 6.044000] ata1.00: 39070080 sectors, multi 16: LBA
[ 6.052000] ata1.00: ata_hpa_resize 1: sectors = 39070080, hpa_sectors = 39070080
[ 6.052000] ata1.00: configured for UDMA/100
[ 6.052000] scsi1 : ata_piix
[ 6.372000] ata2.00: ATAPI, max UDMA/33
[ 6.536000] ata2.00: configured for UDMA/33
[ 6.536000] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23EA-2 00K5 PQ: 0 ANSI: 5
[ 6.536000] scsi 1:0:0:0: CD-ROM TEAC DW-28E 2.1A PQ: 0 ANSI: 5
[ 6.560000] SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
[ 6.564000] sda: Write Protect is off
[ 6.564000] sda: Mode Sense: 00 3a 00 00
[ 6.564000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.564000] SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB)
[ 6.564000] sda: Write Protect is off
[ 6.564000] sda: Mode Sense: 00 3a 00 00
[ 6.564000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.564000] sda: sda1 sda2 sda3
[ 6.636000] sd 0:0:0:0: Attached scsi disk sda
[ 6.644000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.644000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.648000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 6.648000] Uniform CD-ROM driver Revision: 3.20
[ 6.648000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.872000] Attempting manual resume
[ 6.872000] swsusp: Resume From Partition 8:3
[ 6.872000] PM: Checking swsusp image.
[ 6.872000] PM: Resume from disk failed.
[ 6.924000] kjournald starting. Commit interval 5 seconds
[ 6.924000] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.144000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 21.616000] NET: Registered protocol family 17
[ 22.568000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 22.588000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.760000] iTCO_vendor_support: vendor-support=0
[ 22.764000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 22.764000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[ 22.764000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.828000] intel_rng: FWH not detected
[ 22.852000] Linux agpgart interface v0.102 (c) Dave Jones
[ 22.852000] agpgart: Detected an Intel i845 Chipset.
[ 22.860000] agpgart: AGP aperture is 64M @ 0xe0000000
[ 23.200000] input: PC Speaker as /class/input/input2
[ 24.108000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512]
[ 24.108000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 24.108000] Yenta: Routing CardBus interrupts to PCI
[ 24.108000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
[ 24.288000] irda_init()
[ 24.288000] NET: Registered protocol family 23
[ 24.328000] parport: PnPBIOS parport detected.
[ 24.328000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 24.340000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
[ 24.340000] Socket status: 30000006
[ 24.340000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 24.340000] cs: IO port probe 0x4000-0x8fff: clean.
[ 24.340000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[ 24.340000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[ 24.340000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512]
[ 24.340000] Yenta: Using INTVAL to route CSC interrupts to PCI
[ 24.340000] Yenta: Routing CardBus interrupts to PCI
[ 24.340000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
[ 24.604000] Yenta: ISA IRQ mask 0x0438, PCI irq 11
[ 24.604000] Socket status: 30000006
[ 24.604000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 24.604000] cs: IO port probe 0x4000-0x8fff: clean.
[ 24.604000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
[ 24.604000] pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[ 24.632000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 24.632000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 24.816000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 24.816000] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 24.864000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 24.868000] pnp: Device 00:0c activated.
[ 24.868000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 24.868000] nsc-ircc, chip->init
[ 24.868000] nsc-ircc, Found chip at base=0x02e
[ 24.868000] nsc-ircc, driver loaded (Dag Brattli)
[ 24.868000] IrDA: Registered device irda0
[ 24.868000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 25.200000] intel8x0_measure_ac97_clock: measured 55286 usecs
[ 25.200000] intel8x0: clocking to 48000
[ 25.300000] cs: IO port probe 0x100-0x3af: clean.
[ 25.300000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 25.300000] cs: IO port probe 0x820-0x8ff: clean.
[ 25.300000] cs: IO port probe 0xc00-0xcf7: clean.
[ 25.304000] cs: IO port probe 0xa00-0xaff: clean.
[ 25.304000] cs: IO port probe 0x100-0x3af: clean.
[ 25.304000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 25.304000] cs: IO port probe 0x820-0x8ff: clean.
[ 25.308000] cs: IO port probe 0xc00-0xcf7: clean.
[ 25.308000] cs: IO port probe 0xa00-0xaff: clean.
[ 25.496000] lp0: using parport0 (interrupt-driven).
[ 25.552000] Adding 1028152k swap on /dev/disk/by-uuid/5656701b-7e99-4b40-9b3c-46edaca423e1. Priority:-1 extents:1 across:1028152k
[ 25.656000] EXT3 FS on sda1, internal journal
[ 26.040000] NET: Registered protocol family 10
[ 26.040000] lo: Disabled Privacy Extensions
[ 26.080000] kjournald starting. Commit interval 5 seconds
[ 26.080000] EXT3 FS on sda2, internal journal
[ 26.080000] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.344000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 30.620000] input: TPPS/2 IBM TrackPoint as /class/input/input4
[ 32.608000] ACPI: AC Adapter [AC] (on-line)
[ 32.692000] ACPI: Battery Slot [BAT0] (battery present)
[ 32.784000] input: Power Button (FF) as /class/input/input5
[ 32.792000] ACPI: Power Button (FF) [PWRF]
[ 32.844000] input: Lid Switch as /class/input/input6
[ 32.844000] ACPI: Lid Switch [LID]
[ 32.876000] input: Sleep Button (CM) as /class/input/input7
[ 32.876000] ACPI: Sleep Button (CM) [SLPB]
[ 32.952000] Using specific hotkey driver
[ 33.024000] ACPI: ACPI Dock Station Driver
[ 33.160000] ibm_acpi: IBM ThinkPad ACPI Extras v0.13
[ 33.160000] ibm_acpi: http://ibm-acpi.sf.net/
[ 33.296000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 33.384000] pcc_acpi: loading...
[ 36.612000] eth0: no IPv6 routers present
[ 41.848000] [drm] Initialized drm 1.1.0 20060810
[ 41.860000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 41.860000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 42.416000] ppdev: user-space parallel port driver
[ 43.564000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 43.564000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 43.564000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 43.836000] [drm] Setting GART location based on new memory map
[ 43.836000] [drm] writeback test succeeded in 1 usecs
[ 44.320000] Non-volatile memory driver v1.2
[ 44.436000] input: /usr/sbin/thinkpad-keys as /class/input/input8
[ 44.656000] IBM machine detected. Enabling interrupts during APM calls.
[ 44.656000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 44.656000] apm: overridden by ACPI.
[ 55.404000] eth0: no IPv6 routers present
[ 7434.384000] cdrom: This disc doesn't have any tracks I recognize!
[ 7829.044000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 7829.096000] ISO 9660 Extensions: RRIP_1991A
[ 9059.176000] cdrom: This disc doesn't have any tracks I recognize!
[11769.516000] cdrom: This disc doesn't have any tracks I recognize!
[11855.620000] ISO 9660 Extensions: Microsoft Joliet Level 3
[11855.644000] ISO 9660 Extensions: RRIP_1991A
[12497.412000] cdrom: This disc doesn't have any tracks I recognize!
[12790.332000] cdrom: This disc doesn't have any tracks I recognize!
[13668.176000] cdrom: This disc doesn't have any tracks I recognize!
[14489.752000] cdrom: This disc doesn't have any tracks I recognize!
Error with burning ISO Disc Image (ISO CD Image) with application "GNOME Baker":
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.2
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identification : 'DW-28E '
Revision : '2.1A'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009 (CD-R)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1441792 = 1408 KB
FIFO size : 12582912 = 12288 KB
Speed set to 1411 KB/s
4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Writing time: 616.375s
Average write speed 7.8x.
Min drive buffer fill was 96%
Fixating...
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 45.465s timeout 480s
cmd finished after 45.465s timeout 480s
wodim: Cannot fixate disk.
Fixating time: 45.520s