### This file is automatically generated by update-modules
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for update-modules(8).
#
### update-modules: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
# Support for i2c and lm_sensors
alias char-major-89 i2c-dev
### update-modules: end processing /etc/modules.d/aliases
### update-modules: start processing /etc/modules.d/alsa
# Alsa kernel modules' configuration file.
# ALSA portion
# OSS/Free portion
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `modules-update' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
## OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.13 ---
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
# --- END: Generated by ALSACONF, do not edit. ---
### update-modules: end processing /etc/modules.d/alsa
### update-modules: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### update-modules: end processing /etc/modules.d/i386
### update-modules: start processing /etc/modules.d/lirc
#
# For first serial receivers:
#
#options lirc_serial irq=4 io=0x3f8
#options lirc_sir irq=4 io=0x3f8
#
# Detach first serial port from serial-driver.
# Use this when you have your serial-port-driver statically
# compiled into your kernel, or as a module but loaded before
# the lirc-module.
#
#pre-install lirc_serial setserial /dev/ttyS0 uart none
#
#pre-install lirc_sir setserial /dev/ttyS0 uart none
#
# For parallel receivers:
#
#options lirc_parallel irq=7 io=0x3bc
### update-modules: end processing /etc/modules.d/lirc
### update-modules: start processing /etc/modules.d/ndiswrapper
# modules.d configuration file for NDISWRAPPER
# Internal Aliases - Do not edit
# ------------------------------
alias wlan0 ndiswrapper
# Configurable module parameters
# ------------------------------
# utils_version: Compatible version of utils (read only: 1.9)
# hangcheck_interval: The interval, in seconds, for checking if driver is hung. (default: 0)
# debug: debug level
# proc_gid: The gid of the files created in /proc (default: 0).
# proc_uid: The uid of the files created in /proc (default: 0).
# if_name: Network interface name or template (default: wlan%d)
### update-modules: end processing /etc/modules.d/ndiswrapper
### update-modules: start processing /etc/modules.d/svgalib_helper
# modules.d configuration file for SVGALIB_HELPER
# Configurable module parameters
# ------------------------------
# debug: Debug output level.
# all_devices: Give access to all PCI devices, regardless of class.
probeall /dev/svga svgalib_helper
### update-modules: end processing /etc/modules.d/svgalib_helper