All pastes #625165 Raw Edit

Something

public text v1 · immutable
·published 2007-07-18 19:59 UTC
rendered paste body
# dmesg
5c1ca1d130b8
pass
test 2:
434721ca40639b3f
pass
test 3:
e8f9becae97e5d29
pass
test 4:
90038fc6cf13c1db
pass
test 5:
d55e100510128986
pass
test 6:
0a942b124ecaa546
pass
testing michael_mic across pages
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
inport.c: Didn't find InPort mouse at 0x23c
logibm.c: Didn't find Logitech busmouse at 0x23c
input: PC Speaker
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
r8169: NAPI enabled
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xf8802000, 00:18:4d:72:08:ce, IRQ 5
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 11, latency: 32, mmio: 0xec000000
bttv0: detected: Osprey-100 [card=82], PCI subsystem ID is 0070:ff00
bttv0: using: Osprey 100/150 (878) [card=82,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: osprey eeprom: card=82 name=Osprey 100/150 (878) serial=7844501
bttv0: using tuner=-1
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .<6>input: AT Translated Set 2 keyboard on isa0060/serio0
. ok
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
input: PS/2 Generic Mouse on isa0060/serio1
hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.11 loaded.
sata_nv version 0.8
ACPI: PCI Interrupt Link [LSID] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSID] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xC400 irq 10
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xC408 irq 10
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c68 86:3e01 87:4063 88:407f
ata1: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata1: dev 0 configured for UDMA/133
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
  Vendor: ATA       Model: Maxtor 6L250S0    Rev: BANC
  Type:   Direct-Access                      ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LFID] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xD800 irq 11
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xD808 irq 11
ata3: no device found (phy stat 00000000)
scsi2 : sata_nv
ata4: no device found (phy stat 00000000)
scsi3 : sata_nv
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[eb004000-eb0047ff]  Max Packet=[4096]
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugs is not available
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: nVidia Corporation CK804 USB Controller
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: irq 11, io mem 0xec103000
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: nVidia Corporation CK804 USB Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 10, io mem 0xec102000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v2.2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb 2-3: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
i2c /dev entries driver
Linux telephony interface: v1.00
ixj driver initialized.
md: raid0 personality registered as nr 2
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Advanced Linux Sound Architecture Driver Version 1.0.9rc2  (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:04.0 to 64
intel8x0_measure_ac97_clock: measured 49660 usecs
intel8x0: clocking to 46892
ALSA device list:
  #0: NVidia CK804 with ALC850 at 0xec105000, irq 10
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000fea5600d5c5a9]
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 188k freed
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
Adding 1004052k swap on /dev/sda2.  Priority:-1 extents:1
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: PHY reset until link up
r8169: eth0: link up
r8169: eth0: link up
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
r8169: eth0: link up
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
r8169: eth0: link up
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: link up
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
r8169: eth0: link up
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: PHY reset until link up
r8169: eth0: link up
eth0: Promiscuous mode enabled.
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
device eth0 left promiscuous mode
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
r8169: eth0: link up
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
r8169: eth0: link up
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
device eth0 left promiscuous mode
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
r8169: eth0: link up
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
usb 2-3: USB disconnect, address 2
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
ohci_hcd 0000:00:02.0: wakeup
usb 2-3: new low speed USB device using ohci_hcd and address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-3
device eth0 left promiscuous mode
device eth0 entered promiscuous mode
eth0: Promiscuous mode enabled.
r8169: eth0: link up
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.
eth0: Promiscuous mode enabled.