Linux version 2.6.22.1-smp (root@despair) (gcc version 4.1.2) #1 SMP Thu Jul 12 18:32:36 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
BIOS-e820: 000000003f670000 - 000000003f67e000 (ACPI data)
BIOS-e820: 000000003f67e000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
118MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6480
Entering add_active_range(0, 0, 259696) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 259696
early_node_map[1] active PFN ranges
0: 0 -> 259696
On node 0 totalpages: 259696
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 236 pages used for memmap
HighMem zone: 30084 pages, LIFO batch:7
DMI present.
ACPI: RSDP 000F63B0, 0014 (r0 PTLTD )
ACPI: RSDT 3F6764D1, 0048 (r1 Sony N0 20060710 PTL 0)
ACPI: FACP 3F67DDDE, 0084 (r2 Sony N0 20060710 PTL 5A)
ACPI: DSDT 3F677E33, 5FAB (r1 Sony N0 20060710 PTL 100000E)
ACPI: FACS 3F67EFC0, 0040
ACPI: APIC 3F67DE62, 0068 (r1 Sony N0 20060710 PTL 5A)
ACPI: BOOT 3F67DFD8, 0028 (r1 Sony N0 20060710 PTL 1)
ACPI: MCFG 3F67DF02, 003C (r1 Sony N0 20060710 PTL 5A)
ACPI: TCPA 3F67DF3E, 0032 (r1 Sony N0 20060710 PTL 5A52)
ACPI: APIC 3F67DF70, 0068 (r1 Sony N0 20060710 PTL 0)
ACPI: SSDT 3F6776B1, 077E (r1 Sony N0 20060710 PTL 20050624)
ACPI: SSDT 3F676EE6, 07CB (r1 Sony N0 20060710 PTL 20050624)
ACPI: SSDT 3F676519, 04E2 (r1 Sony N0 20060710 PTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists. Total pages: 257668
Kernel command line: root=/dev/sda2 ro vga=869 resume2=swap:/dev/sda3
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1833.598 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024792k/1038784k available (2487k kernel code, 13384k reserved, 1077k data, 236k init, 121280k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0482000 - 0xc04bd000 ( 236 kB)
.data : 0xc036dce5 - 0xc047b224 (1077 kB)
.text : 0xc0100000 - 0xc036dce5 (2487 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3671.87 BogoMIPS (lpj=7343740)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 15754.59 BogoMIPS (lpj=31509180)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
Total of 2 processors activated (19426.46 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=71
Device driver platform lacks bus and class support for being resumed.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: Please test with "acpi_osi=!Linux"
Please send dmidecode to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Device driver pci0000:00 lacks bus and class support for being resumed.
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
Device driver pnp0 lacks bus and class support for being resumed.
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
USB driver usbfs lacks resume support.
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 16
Device driver fw-host0 lacks bus and class support for being resumed.
Time: tsc clocksource has been installed.
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[dc005000-dc0057ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: d6000000-d7ffffff
PREFETCH window: d0000000-d1ffffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: dc100000-dc1fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: 3000-3fff
MEM window: d8000000-d9ffffff
PREFETCH window: d2000000-d3ffffff
PCI: Bridge: 0000:00:1c.3
IO window: 4000-4fff
MEM window: da000000-dbffffff
PREFETCH window: d4000000-d5ffffff
PCI: Bus 10, cardbus bridge: 0000:09:04.0
IO window: 00005000-000050ff
IO window: 00005400-000054ff
PREFETCH window: 50000000-53ffffff
MEM window: 54000000-57ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 5000-5fff
MEM window: dc000000-dc0fffff
PREFETCH window: 50000000-53ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 21
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x37 set to 0x1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 7872k, total 7872k
vesafb: mode is 1280x800x32, linelength=5120, pages=0
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
Device driver pnp1 lacks bus and class support for being resumed.
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Switched to high resolution mode on CPU 0
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Device driver isa lacks bus and class support for being resumed.
Device driver 08004603021ce119 lacks bus and class support for being resumed.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[08004603021ce119]
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
Device driver lo lacks bus and class support for being resumed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: MATSHITAUJ-832D, ATAPI CD/DVD-ROM drive
Device driver ide0 lacks bus and class support for being resumed.
hda: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PCI driver AEC62xx_IDE lacks driver specific resume support.
PCI driver ALI15x3_IDE lacks driver specific resume support.
PCI driver AMD_IDE lacks driver specific resume support.
PCI driver ATIIXP_IDE lacks driver specific resume support.
PCI driver CMD64x_IDE lacks driver specific resume support.
PCI driver Cyrix_IDE lacks driver specific resume support.
PCI driver CS5530 IDE lacks driver specific resume support.
PCI driver CS5535_IDE lacks driver specific resume support.
PCI driver Cypress_IDE lacks driver specific resume support.
PCI driver HPT34x_IDE lacks driver specific resume support.
PCI driver HPT366_IDE lacks driver specific resume support.
PCI driver ITE8213_IDE lacks driver specific resume support.
PCI driver ITE821x IDE lacks driver specific resume support.
PCI driver JMicron IDE lacks driver specific resume support.
PCI driver Promise_Old_IDE lacks driver specific resume support.
PCI driver Promise_IDE lacks driver specific resume support.
PCI driver PIIX_IDE lacks driver specific resume support.
PCI driver RZ1000_IDE lacks driver specific resume support.
PCI driver Serverworks_IDE lacks driver specific resume support.
PCI driver SiI_IDE lacks driver specific resume support.
PCI driver SIS_IDE lacks driver specific resume support.
PCI driver SLC90e66_IDE lacks driver specific resume support.
PCI driver TC86C001 lacks driver specific resume support.
PCI driver TRIFLEX_IDE lacks driver specific resume support.
PCI driver TRM290_IDE lacks driver specific resume support.
PCI driver VIA_IDE lacks driver specific resume support.
PCI driver PCI_IDE lacks driver specific resume support.
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
PCI driver sata_svw lacks driver specific resume support.
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
ata_piix 0000:00:1f.2: invalid MAP value 0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
Device driver host0 lacks bus and class support for being resumed.
scsi1 : ata_piix
Device driver host1 lacks bus and class support for being resumed.
ata1: SATA max UDMA/133 cmd 0x000118d0 ctl 0x000118c6 bmdma 0x000118b0 irq 22
ata2: SATA max UDMA/133 cmd 0x000118c8 ctl 0x000118c2 bmdma 0x000118b8 irq 22
ata1.00: ATA-7: FUJITSU MHV2100BH, 00000025, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
Device driver target0:0:0 lacks bus and class support for being resumed.
scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 0000 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
PCI driver sata_promise lacks driver specific resume support.
PCI driver sata_qstor lacks driver specific resume support.
PCI driver sata_vsc lacks driver specific resume support.
PCI driver sata_sis lacks driver specific resume support.
PCI driver sata_sx4 lacks driver specific resume support.
PCI driver sata_uli lacks driver specific resume support.
PCI driver sata_mv lacks driver specific resume support.
PCI driver pdc_adma lacks driver specific resume support.
usbmon: debugfs is not available
usbcore: registered new interface driver mdc800
USB driver mdc800 lacks resume support.
drivers/usb/image/mdc800.c: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Suspend v2.2.10
Suspend2 Userspace Storage Manager support registered.
Suspend2 Basic User Interface support registered.
Suspend2 Compressor support registered.
Suspend2 Block I/O support registered.
Suspend2 Swap Allocator support registered.
Suspend2 File Allocator support registered.
Suspend2 Userspace UI support registered.
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
Replacing swsusp.
No storage allocator is currently active. Rechecking whether we can use one.
Suspend2: SwapAllocator: Signature found.
Suspend2: Resuming enabled.
Suspend2: Normal swapspace found.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
PCI driver shpchp lacks driver specific resume support.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
iTCO_vendor_support: vendor-support=0
Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
iTCO_wdt: No card detected
Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
Device driver usbdev3.1_ep00 lacks bus and class support for being resumed.
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Device driver usbdev3.1_ep81 lacks bus and class support for being resumed.
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 20
usb 2-2: new full speed USB device using uhci_hcd and address 2
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 20, io base 0x00001880
Device driver usbdev4.1_ep00 lacks bus and class support for being resumed.
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
intel_rng: FWH not detected
Device driver usbdev4.1_ep81 lacks bus and class support for being resumed.
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
Device driver usbdev2.2_ep00 lacks bus and class support for being resumed.
usb 2-2: configuration #1 chosen from 1 choice
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc544000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Device driver usbdev5.1_ep00 lacks bus and class support for being resumed.
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
Device driver usbdev2.2_ep02 lacks bus and class support for being resumed.
Device driver usbdev2.2_ep82 lacks bus and class support for being resumed.
Device driver usbdev5.1_ep81 lacks bus and class support for being resumed.
Device driver i2c-0 lacks bus and class support for being resumed.
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xc0000000
ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:07:00.0 to 64
sky2 0000:07:00.0: v1.14 addr 0xd8000000 irq 19 Yukon-FE (0xb7) rev 1
Device driver eth0 lacks bus and class support for being resumed.
sky2 eth0: addr 00:01:4a:f6:ca:63
ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22
sd 0:0:0:0: Attached scsi generic sg0 type 0
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.38d
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:06:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
Device driver 0000:06:00.0 lacks bus and class support for being resumed.
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
Device driver host2 lacks bus and class support for being resumed.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 5-4: new high speed USB device using ehci_hcd and address 2
Device driver usbdev5.2_ep00 lacks bus and class support for being resumed.
usb 5-4: configuration #1 chosen from 1 choice
Device driver usbdev5.2_ep02 lacks bus and class support for being resumed.
Device driver usbdev5.2_ep82 lacks bus and class support for being resumed.
Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6]
Yenta: Enabling burst memory read transactions
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Yenta: Using CSCINT to route CSC interrupts to PCI
iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
Device driver phy0 lacks bus and class support for being resumed.
Device driver wmaster0 lacks bus and class support for being resumed.
wmaster0: Selected rate control algorithm 'iwl-3945-rs'
Device driver wlan0 lacks bus and class support for being resumed.
usb 5-6: new high speed USB device using ehci_hcd and address 4
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64
Device driver usbdev5.4_ep00 lacks bus and class support for being resumed.
usb 5-6: configuration #1 chosen from 1 choice
Device driver usbdev5.4_ep81 lacks bus and class support for being resumed.
Device driver usbdev5.4_ep86 lacks bus and class support for being resumed.
Linux video capture interface: v2.00
usbcam: registering driver r5u870 0.10.0
Yenta: ISA IRQ mask 0x0cf8, PCI irq 21
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d
pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
cs: IO port probe 0x5000-0x5fff: clean.
pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
usb 2-2: USB disconnect, address 2
scsi3 : SCSI emulation for USB Mass Storage devices
Device driver host3 lacks bus and class support for being resumed.
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Device driver pcmcia_socket0 lacks bus and class support for being resumed.
r5u870-0: Detected Sony VGP-VCC2 (VAIO SZ)
Device driver 5-6 lacks bus and class support for being resumed.
usbcore: registered new interface driver r5u870
usb 3-1: new full speed USB device using uhci_hcd and address 2
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
Device driver usbdev3.2_ep00 lacks bus and class support for being resumed.
usb 3-1: configuration #1 chosen from 1 choice
Device driver usbdev3.2_ep81 lacks bus and class support for being resumed.
Device driver usbdev3.2_ep02 lacks bus and class support for being resumed.
Device driver usbdev3.2_ep83 lacks bus and class support for being resumed.
Adding 1004052k swap on /dev/sda3. Priority:-1 extents:1 across:1004052k
usb 4-2: new full speed USB device using uhci_hcd and address 2
Device driver usbdev4.2_ep00 lacks bus and class support for being resumed.
usb 4-2: configuration #1 chosen from 1 choice
Device driver usbdev4.2_ep81 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep02 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep82 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep03 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep83 lacks bus and class support for being resumed.
EXT3 FS on sda2, internal journal
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
Device driver usbdev4.2_ep03 lacks bus and class support for being resumed.
Device driver usbdev4.2_ep83 lacks bus and class support for being resumed.
Device driver hci0 lacks bus and class support for being resumed.
usbcore: registered new interface driver hci_usb
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Device driver target3:0:0 lacks bus and class support for being resumed.
scsi 3:0:0:0: Direct-Access Sony USB HS-CARD 4.52 PQ: 0 ANSI: 0
sd 3:0:0:0: [sdb] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg1 type 0
Device driver target3:0:1 lacks bus and class support for being resumed.
Device driver target3:0:2 lacks bus and class support for being resumed.
Device driver target3:0:3 lacks bus and class support for being resumed.
Device driver target3:0:4 lacks bus and class support for being resumed.
Device driver target3:0:5 lacks bus and class support for being resumed.
Device driver target3:0:6 lacks bus and class support for being resumed.
Device driver target3:0:7 lacks bus and class support for being resumed.
usb-storage: device scan complete
fuse init (API version 7.8)
sky2 eth0: enabling interface
sky2 eth0: ram buffer 4K
iwl3945: REPLY_ADD_STA failed
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:14:c1:0f:94:5c
wlan0: RX authentication from 00:14:c1:0f:94:5c (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:14:c1:0f:94:5c
wlan0: RX AssocResp from 00:14:c1:0f:94:5c (capab=0x411 status=0 aid=1)
wlan0: associated
sky2 eth0: disabling interface
sky2 eth0: enabling interface
sky2 eth0: ram buffer 4K
sky2 eth0: disabling interface
ata1: soft resetting port
ata1.00: configured for UDMA/100
ata1: EH complete
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: soft resetting port
ata2: EH complete
ata2: soft resetting port
ata2: EH complete
Device driver target3:0:1 lacks bus and class support for being resumed.
Device driver target3:0:2 lacks bus and class support for being resumed.
Device driver target3:0:3 lacks bus and class support for being resumed.
Device driver target3:0:4 lacks bus and class support for being resumed.
Device driver target3:0:5 lacks bus and class support for being resumed.
Device driver target3:0:6 lacks bus and class support for being resumed.
Device driver target3:0:7 lacks bus and class support for being resumed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
wlan0: duplicate address detected!
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8115 buckets, 64920 max)
ACPI: SSDT 3F676CB5, 01A8 (r1 Sony N0 20060710 PTL 20050624)
ACPI: SSDT 3F6769FB, 0235 (r1 Sony N0 20060710 PTL 20050624)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F676E5D, 0089 (r1 Sony N0 20060710 PTL 20050624)
ACPI: SSDT 3F676C30, 0085 (r1 Sony N0 20060710 PTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to: possible TSC halt in C2.
Time: acpi_pm clocksource has been installed.
sony-laptop: Sony Programmable IO Control Driver v0.5.
sony-laptop: detected Type3 model
input: Sony Vaio Keys as /class/input/input3
input: Sony Vaio Jogdial as /class/input/input4
sony-laptop: device allocated minor is 61
sony-laptop: Sony Notebook Control Driver v0.5.
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Battery Slot [BAT1] (battery present)
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized i915 1.6.0 20060119 on minor 0
Clocksource tsc unstable (delta = -77652446 ns)