rendered paste bodyU-Boot 1.2.0-g6c7cac8c-dirty-moko3 (Feb 28 2007 - 03:10:52)
DRAM: 64 MB
Flash: 512 kB
NAND: 64 MiB
Found Environment offset in OOB..
Video: 640x480x8 31kHz 59Hz
USB: S3C2410 USB Deviced
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
QT2410 # run bootmmc
trying to detect SD Card...
MMC found. Card desciption is:
Manufacturer ID = 153357
HW/FW Revision = 3 2
Product Name = 15DŒÿ..3W
Serial Number = 4d5402
Month = 5
Year = 2000
READ_BL_LEN=15, C_SIZE_MULT=7, C_SIZE=109
size = 3521118208
2124194 (0x2069a2) bytes read
## Booting image at 32000000 ...
Image Name: OpenWrt Linux-2.6.21.5
Created: 2007-07-16 9:02:45 UTC
Image Type: ARM Linux Kernel Image (gzip compressed)
Data Size: 2124130 Bytes = 2 MB
Load Address: 30008000
Entry Point: 30008000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Linux version 2.6.21.5 (nbd@ds10) (gcc version 4.1.2) #11 Mon Jul 16 11:02:41 CEST 2007
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0003177
Machine: QT2410
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
DMA zone: 128 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 16256 pages, LIFO batch:3
Normal zone: 0 pages used for memmap
CPU S3C2410A (id 0x32410002)
S3C2410: core 202.666 MHz, memory 101.333 MHz, peripheral 50.666 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists. Total pages: 16256
Kernel command line: rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8 mtdparts=qt2410-nand:0x00040000(u-boot),0x00004000(u-boot_env),0x00200000(kernel),0x1
20000(splash),-(rootfs)
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00500000, tcnt a4ed, tcfg 00000200,00000000, usec 00001e51
Console: colour dummy device 80x30
selected clock c034ecf4 (pclk) quot 26, calc 117283
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61372KB available (2356K code, 207K data, 940K init)
Calibrating delay loop... 100.96 BogoMIPS (lpj=252416)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
S3C2410: Initialising architecture
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4800000, irq 33
DMA channel 1 at c4800040, irq 34
DMA channel 2 at c4800080, irq 35
DMA channel 3 at c48000c0, irq 36
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
s3c2410-lcd s3c2410-lcd: invalid bpp 16
Console: switching to colour frame buffer device 30x20
fb0: s3c2410fb frame buffer device
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410
s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410
s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $
physmap platform flash device: 04000000 at 08000000
CFI: Found no physmap-flash.0 device at location zero
physmap-flash physmap-flash.0: map_probe failed
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
s3c2410-i2c s3c2410-i2c: slave address 0x10
s3c2410-i2c s3c2410-i2c: bus frequency set to 98 KHz
s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter
Registered led device: led
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Freeing init memory: 940K
Warning: unable to open an initial console.
selected clock c034ecf4 (pclk) quot 26, calc 117283
selected clock c034ecf4 (pclk) quot 26, calc 117283
Please press Enter to activate this console. PPP generic driver version 2.4.2
BusyBox v1.4.2 (2007-07-16 07:29:39 CEST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
KAMIKAZE (bleeding edge, r7987) -------------------
* 10 oz Vodka Shake well with ice and strain
* 10 oz Triple sec mixture into 10 shot glasses.
* 10 oz lime juice Salute!
---------------------------------------------------
root@OpenWrt:/#