NetBSD 3.1 (GENERIC) #0: Tue Oct 31 04:27:07 UTC 2006
builds@b0.netbsd.org:/home/builds/ab/netbsd-3-1-RELEASE/i386/20061030205
3Z-obj/home/builds/ab/netbsd-3-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 127 MB
avail memory = 116 MB
BIOS32 rev. 0 found at 0xfa040
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (Klamath) (686-class), 1670.81 MHz, id 0x633
cpu0: features 781abfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP>
cpu0: features 781abfd<PGE,CMOV,PAT,MMX>
cpu0: features 781abfd<FXSR,SSE,SSE2>
cpu0: features2 1<SSE3>
cpu0: I-cache 8 KB 32B/line 4-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82441FX (PMC) PCI and Memory Controller (rev. 0x02)
pcib0 at pci0 dev 1 function 0
pcib0: Intel 82371SB (PIIX3) PCI-ISA Bridge (rev. 0x00)
piixide0 at pci0 dev 1 function 1
piixide0: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82371AB (PIIX4) Power Management Controller (miscellaneous bridge) at pci0
dev 1 function 3 not configured
vga1 at pci0 dev 2 function 0: Cirrus Logic CL-GD5446 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
ne2 at pci0 dev 3 function 0: Realtek 8029 Ethernet
ne2: Ethernet address 52:54:00:12:34:56
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x40 0x40] 10baseT-FDX
ne2: interrupting at irq 10
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns8250 or ns16450, no fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 10240 MB, 20805 cyl, 16 head, 63 sec, 512 bytes/sect x 20971520 sectors
wd0: 32-bit data port
wd0(piixide0:0:0): using PIO mode 0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU CD-ROM, QM00003, 0.8.2> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 1
cd0(piixide0:1:0): using PIO mode 0, DMA mode 1 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)