rendered paste bodyVersion 1.0.1
Read EEPROM
Jump to Flash
Version 1.0.1
Read EEPROM
Jump to Flash
Head : Amazon Version 1.0.0
DRAM: 16 MB
Head : relocate_code start
Head: relocate code finish.
Image Name: u-boot image
Image Type: MIPS Linux Firmware (lzma compressed)
Data Size: 38387 Bytes = 37.5 kB
Load Address: 80100000
Entry Point: 80100000
Disabling all the interrupts
Uncompressing UBoot Image ...
Uncompression completed successfully with destLen 115400.
Head: Jumping to u-boot in the ram at 0x80100000
Infineon Amazon
U-Boot 2.0.18-M416 (Feb 8 2006 - 14:40:06)
In env_init : env_ptr = 0xb33f7000
For enviornment CRC32 is OK
Board: AMAZON Yangtse Version, Chip V1.3, CPU Speed 235 MHz
DRAM: 16 MB
relocate_code start
relocate code finish
Entering flash_init()
Flash: 4 MB
env_relocate[224] malloced ENV at 80abf408
Initialize devices...
In: serial
Out: serial
Err: serial
Net: AMAZON Switch
Type "run flash_nfs" to mount root filesystem over NFS
Press enter key to stop autoboot: 0
## Booting image at b335f905 ...
Image Name: MIPS Linux-2.4.20-AMAZON-3.0.5-M
Created: 2006-02-20 8:38:38 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 612027 Bytes = 597.7 kB
Load Address: 80002000
Entry Point: 801d0040
Verifying Checksum ... OK
Uncompressing Kernel Image ... Uncompression time : 273631/117500000
Uncompression length is 2076672
OK
Starting kernel ...
Yangtse Version
memsize=16l
flash_start=0xb3000000
flash_size=4194304l
CPU revision is: 00019064
Primary instruction cache 8kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 4kB 2-way, linesize 16 bytes.
Linux version 2.4.20-AMAZON-3.0.5-M416-V15 (root@blramz02) (gcc version 3.3.4) #2 Mon Feb 20 14:08:25 IST 2006
Can't analyze prologue code at 80022e00
Determined physical RAM map:
User-defined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 ip=10.1.1.110:10.1.1.1::::eth1:off console=ttyS0,115200 ethaddr=00:E0:92:00:01:C5 mem=16M panic=1
mips_counter_frequency:117500000
r4k_offset: 0011edd8(1175000)
Calibrating delay loop... 233.47 BogoMIPS
MIPS CPU counter frequency is fixed at 117500000 Hz
Memory: 14008k/16384k available (1826k kernel code, 2376k reserved, 92k data, 76k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware on host bus 0.
b01054e8 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
Configuration Space of device 0x0d before initialization
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
Autoconfig PCI channel 0x801f4650
Scanning bus 00, I/O 0xb2400000:0xb2600001, Mem 0xb2000000:0xb2400001
e 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
Configuration Space of device 0x0d after initialization
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
LSP Revision 1
Starting kswapd
Disabling the Out Of Memory Killer
Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
pty: 256 Unix98 ptys configured
Starting mib_poll...
Inside mib poll loop ...
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
imq driver loaded.
ttyS0 at MEM 0xb0100400 (irq = 144) is a AMAZONASC
oamk: init_module() called.
Opening oam kernel socket
oamk: init_module() returned.
init_amazon_mtd: start_scan_addr: b3000000
init_amazon_mtd: chip probing count 0
Amazon: probing address:b3000000
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
init_amazon_mtd: bank1, name:Amazon Bank 0, size:4194304bytes
AMAZON flash0: Using static image partition definition
Creating 3 MTD partitions on "Amazon Bank 0":
0x00000000-0x00020000 : "U-Boot"
0x00020000-0x00060000 : "firmware"
0x00060000-0x00400000 : "rootfs,kernel,Data,Environment"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (128 buckets, 1024 max) - 360 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_conntrack_rtsp v0.01 loading
ip_nat_pptp version 1.5 loaded
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
netfilter PSD loaded - (c) astaro AG
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Ebtables v2.0 registered
NET4: Ethernet Bridge 008 for NET4.0
Bridge firewalling registered
Amazon Port Initialization
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 76k freed
init started: BusyBox v1.00 (2006.02.20-08:34+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
Created character device /dev/amazon_port with major[252] and minor[0]
1+0 records in
1+0 records out
1+0 records in
1+0 records out
flash/AmazonSipUsrCfg
flash/AmazonSipSysCfg
gunzip: /ramdisk/flash/fwdiag.gz: No such file or directory
gunzip: /ramdisk/flash/calibration.gz: No such file or directory
Using /lib/modules/2.4.20-AMAZON-3.0.5-M416-V15/kernel/net/ifx_nfext/ifx_nfext_core.o
Using /lib/modules/2.4.20-AMAZON-3.0.5-M416-V15/kernel/net/ifx_nfext/ifx_nfext_ppp.o
Creating ATM char dev with [MAJOR=107] [MINOR=0]
date: 7, month: 7, hour: 51, minute: 7
./translate: not found
Using /lib/modules/2.4.20-AMAZON-3.0.5-M416-V15/kernel/drivers/net/admmod.o
Loading ADM6996 driver...
ADM6996LC ..
Bringing up syslog
Bringing up klogd
device eth1 entered promiscuous mode
br0: port 1(eth1) entering learning state
atmsvc: no signaling demon
SIGSEGV
SIGSEGV
SIGSEGV
SIGSEGV
SIGSEGV
SIGSEGV
SIGSEGV
SIGSEGV
SIGSEGV
SIGSEGV
SIGSEGV
Using /lib/drv_amazon
amazon Board Driver, Version 0.0.1.8
<6>(c) Copyright 2004, Infineon Technologies AG
<7>Using major number 251
Created character device /dev/vinbsp with major[251] and minor[0]
Using /lib/drv_vinetic
<6>Vinetic driver module, version 1.1.13.1
<6>(c) Copyright 2005, Infineon Technologies AG
Using /lib/drv_duslic
Duslic Drv: Register ok!
Using /lib/amazon_daa
@(#)CPC5621 Driver, Version0.1.1.1
(c) Copyright 2004, Infineon Technologies AG
<7>CPC5621_DRV: using proc fs
+--------------------------------------+
| Linux/MIPS on AMAZON by Infineon CPE |
+--------------------------------------+
amazon login: httpd: bind: Address already in use
RFC1483/2684 bridge: Interface "nas1" created sucessfully
RFC1483/2684 bridge: Communicating over ATM 0.0.33, encapsulation: LLC
RFC1483/2684 d
e
br0: port 2(nas1) entering learning state
optarg : UBRWill output 1024 bit rsa secret key to '/tmp/rsa_key'
Generating key, this may take a while...
br0: port 1(eth1) entering forwarding state
br0: topology change detected, propagating
3.0.5-M416-V15
Done.
br0: port 2(nas1) entering forwarding state
br0: topology change detected, propagating
Keep trying to reboot!
Rebooting ARC
new reboot
start download pages
pages downloaded./translate: not found