rendered paste bodymichael@michael-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000009fe10000 end: 000000009ff10000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000009ff10000 size: 0000000000010000 end: 000000009ff20000 type: 3
[ 0.000000] copy_e820_map() start: 000000009ff20000 size: 00000000000e0000 end: 00000000a0000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009ff10000 (usable)
[ 0.000000] BIOS-e820: 000000009ff10000 - 000000009ff20000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009ff20000 - 00000000a0000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 1663MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 655120) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 655120
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 655120
[ 0.000000] On node 0 totalpages: 655120
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3326 pages used for memmap
[ 0.000000] HighMem zone: 422418 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fad60
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x12000519 MSFT 0x00000097) @ 0x9ff10000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x12000519 MSFT 0x00000097) @ 0x9ff10200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x12000519 MSFT 0x00000097) @ 0x9ff10390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x12000519 MSFT 0x00000097) @ 0x9ff20040
[ 0.000000] ACPI: DSDT (v001 A0217 A0217001 0x00000001 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:3 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:3 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at a8000000 (gap: a0000000:5f780000)
[ 0.000000] Detected 2400.320 MHz processor.
[ 16.697420] Built 1 zonelists. Total pages: 650002
[ 16.697424] Kernel command line: root=UUID=a9aad6d5-1ede-42c2-997a-35e56994ebc1 ro quiet splash
[ 16.697535] mapped APIC to ffffd000 (fee00000)
[ 16.697537] mapped IOAPIC to ffffc000 (fec00000)
[ 16.697540] Enabling fast FPU save and restore... done.
[ 16.697542] Enabling unmasked SIMD FPU exception support... done.
[ 16.697551] Initializing CPU#0
[ 16.697601] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 16.698992] Console: colour VGA+ 80x25
[ 16.699565] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 16.700042] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.781970] Memory: 2587072k/2620480k available (1992k kernel code, 32020k reserved, 893k data, 328k init, 1702976k highmem)
[ 16.781978] virtual kernel memory layout:
[ 16.781979] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 16.781980] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.781981] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 16.781982] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 16.781983] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 16.781984] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 16.781985] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 16.781987] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 16.861369] Calibrating delay using timer specific routine.. 4802.66 BogoMIPS (lpj=9605325)
[ 16.861409] Security Framework v1.0.0 initialized
[ 16.861418] SELinux: Disabled at boot.
[ 16.861432] Mount-cache hash table entries: 512
[ 16.861759] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[ 16.861766] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 16.861768] CPU: L2 Cache: 512K (64 bytes/line)
[ 16.861771] CPU 0(2) -> Core 0
[ 16.861772] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
[ 16.861783] Compat vDSO mapped to ffffe000.
[ 16.861788] Remapping vsyscall page to ffffe000
[ 16.861798] Checking 'hlt' instruction... OK.
[ 16.877527] SMP alternatives: switching to UP code
[ 16.878026] Early unpacking initramfs... done
[ 17.122126] ACPI: Core revision 20060707
[ 17.122616] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 17.124130] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 17.124151] SMP alternatives: switching to SMP code
[ 17.124287] Booting processor 1/1 eip 3000
[ 17.134887] Initializing CPU#1
[ 17.213237] Calibrating delay using timer specific routine.. 4800.67 BogoMIPS (lpj=9601346)
[ 17.213243] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[ 17.213249] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.213250] CPU: L2 Cache: 512K (64 bytes/line)
[ 17.213252] CPU 1(2) -> Core 1
[ 17.213254] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
[ 17.213014] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
[ 17.213025] Total of 2 processors activated (9603.33 BogoMIPS).
[ 17.213122] ENABLING IO-APIC IRQs
[ 17.213280] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 17.360656] checking TSC synchronization across 2 CPUs:
[ 0.000001] CPU#0 had -187 usecs TSC skew, fixed it up.
[ 0.000003] CPU#1 had 187 usecs TSC skew, fixed it up.
[ 0.003993] Brought up 2 CPUs
[ 0.140189] migration_cost=510
[ 0.140420] Booting paravirtualized kernel on bare hardware
[ 0.140489] Time: 4:46:52 Date: 06/10/107
[ 0.140518] NET: Registered protocol family 16
[ 0.140595] EISA bus registered
[ 0.140598] ACPI: bus type pci registered
[ 0.141494] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.141496] PCI: Using configuration type 1
[ 0.141498] Setting up standard PCI resources
[ 0.151622] ACPI: Interpreter enabled
[ 0.151624] ACPI: Using IOAPIC for interrupt routing
[ 0.152332] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.152337] PCI: Probing PCI hardware (bus 00)
[ 0.152950] Boot video device is 0000:03:00.0
[ 0.153086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.167482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.167684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.168473] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.168650] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.168824] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.168999] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.169214] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.169388] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.169566] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.169740] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[ 0.169802] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.169811] pnp: PnP ACPI init
[ 0.174607] pnp: PnP ACPI: found 13 devices
[ 0.174611] PnPBIOS: Disabled by ACPI PNP
[ 0.174661] PCI: Using ACPI for IRQ routing
[ 0.174663] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.183342] NET: Registered protocol family 8
[ 0.183344] NET: Registered protocol family 20
[ 0.184055] pnp: 00:08: ioport range 0xc00-0xc0f has been reserved
[ 0.184058] pnp: 00:08: ioport range 0xd00-0xd0f has been reserved
[ 0.184060] pnp: 00:08: ioport range 0xa20-0xa2f has been reserved
[ 0.184062] pnp: 00:08: ioport range 0xa30-0xa3f has been reserved
[ 0.184259] PCI: Bridge: 0000:00:01.0
[ 0.184261] IO window: e000-efff
[ 0.184265] MEM window: ddf00000-dfffffff
[ 0.184268] PREFETCH window: c0000000-dcffffff
[ 0.184272] PCI: Bridge: 0000:00:06.0
[ 0.184274] IO window: d000-dfff
[ 0.184276] MEM window: disabled.
[ 0.184279] PREFETCH window: disabled.
[ 0.184281] PCI: Bridge: 0000:00:07.0
[ 0.184283] IO window: c000-cfff
[ 0.184286] MEM window: disabled.
[ 0.184288] PREFETCH window: disabled.
[ 0.184306] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.184315] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 0.184323] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 0.184357] NET: Registered protocol family 2
[ 0.223757] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.223977] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.225239] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.225903] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.225906] TCP reno registered
[ 0.239775] checking if image is initramfs... it is
[ 0.721338] Freeing initrd memory: 6992k freed
[ 1.280000] audit: initializing netlink socket (disabled)
[ 1.280000] audit(1184042812.464:1): initialized
[ 1.280000] highmem bounce pool size: 64 pages
[ 1.280000] VFS: Disk quotas dquot_6.5.1
[ 1.280000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.280000] io scheduler noop registered
[ 1.280000] io scheduler anticipatory registered
[ 1.280000] io scheduler deadline registered
[ 1.280000] io scheduler cfq registered (default)
[ 1.336000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.336000] assign_interrupt_mode Found MSI capability
[ 1.336000] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.336000] isapnp: Scanning for PnP cards...
[ 1.688000] isapnp: No Plug & Play device found
[ 1.708000] Real Time Clock Driver v1.12ac
[ 1.708000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.708000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.708000] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.708000] mice: PS/2 mouse device common for all mice
[ 1.708000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.708000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.708000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.708000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.708000] PNP: No PS/2 controller found. Probing ports directly.
[ 1.708000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.708000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.708000] EISA: Probing bus 0 at eisa.0
[ 1.708000] EISA: Detected 0 cards.
[ 1.740000] TCP cubic registered
[ 1.740000] NET: Registered protocol family 1
[ 1.740000] Starting balanced_irq
[ 1.740000] Using IPI No-Shortcut mode
[ 1.740000] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.740000] Magic number: 15:413:767
[ 1.740000] hash matches device ptyp3
[ 1.740000] Freeing unused kernel memory: 328k freed
[ 1.744000] Time: acpi_pm clocksource has been installed.
[ 2.936000] Capability LSM initialized
[ 3.372000] usbcore: registered new interface driver usbfs
[ 3.372000] usbcore: registered new interface driver hub
[ 3.372000] usbcore: registered new device driver usb
[ 3.372000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.372000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 3.372000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 3.376000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 3.376000] ohci_hcd 0000:00:03.0: irq 16, io mem 0xdded4000
[ 3.392000] SCSI subsystem initialized
[ 3.420000] libata version 2.20 loaded.
[ 3.424000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 3.424000] Copyright (c) 1999-2006 Intel Corporation.
[ 3.460000] usb usb1: configuration #1 chosen from 1 choice
[ 3.460000] hub 1-0:1.0: USB hub found
[ 3.460000] hub 1-0:1.0: 3 ports detected
[ 3.472000] Floppy drive(s): fd0 is 1.44M
[ 3.492000] FDC 0 is a post-1991 82077
[ 3.568000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17
[ 3.568000] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 3.568000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 2
[ 3.568000] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[ 3.568000] ehci_hcd 0000:00:03.3: irq 17, io mem 0xdded7000
[ 3.568000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.568000] usb usb2: configuration #1 chosen from 1 choice
[ 3.568000] hub 2-0:1.0: USB hub found
[ 3.568000] hub 2-0:1.0: 8 ports detected
[ 3.676000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 3.924000] e1000: 0000:00:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:15:f2:ad:f0:11
[ 3.964000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.964000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19
[ 3.964000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 3.964000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 3.964000] ohci_hcd 0000:00:03.1: irq 19, io mem 0xdded5000
[ 4.024000] usb usb3: configuration #1 chosen from 1 choice
[ 4.024000] hub 3-0:1.0: USB hub found
[ 4.024000] hub 3-0:1.0: 3 ports detected
[ 4.132000] pata_sis 0000:00:02.5: version 0.5.1
[ 4.132000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 4.132000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 4.132000] scsi0 : pata_sis
[ 4.304000] ata1.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 4.304000] ata1.00: ATA-7: ST3200826A, 3.03, max UDMA/100
[ 4.304000] ata1.00: 390721968 sectors, multi 16: LBA48
[ 4.316000] ata1.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
[ 4.316000] ata1.00: configured for UDMA/100
[ 4.316000] scsi1 : pata_sis
[ 4.988000] ata2.00: ATAPI, max UDMA/33
[ 4.988000] ata2.01: ATAPI, max UDMA/33
[ 5.160000] ata2.00: configured for UDMA/33
[ 35.160000] ata2.01: qc timeout (cmd 0xef)
[ 35.160000] ata2.01: failed to set xfermode (err_mask=0x4)
[ 35.160000] ata2: failed to recover some devices, retrying in 5 secs
[ 40.984000] ata2.00: configured for UDMA/33
[ 70.984000] ata2.01: qc timeout (cmd 0xef)
[ 70.984000] ata2.01: failed to set xfermode (err_mask=0x4)
[ 70.984000] ata2.01: limiting speed to UDMA/33:PIO3
[ 70.984000] ata2: failed to recover some devices, retrying in 5 secs
[ 76.808000] ata2.00: configured for UDMA/33
[ 106.808000] ata2.01: qc timeout (cmd 0xef)
[ 106.808000] ata2.01: failed to set xfermode (err_mask=0x4)
[ 106.808000] ata2.01: disabled
[ 106.808000] ata2: failed to recover some devices, retrying in 5 secs
[ 111.812000] ata2.00: failed to set xfermode (err_mask=0x40)
[ 111.812000] ata2: failed to recover some devices, retrying in 5 secs
[ 117.472000] ata2.00: configured for UDMA/33
[ 117.472000] scsi 0:0:0:0: Direct-Access ATA ST3200826A 3.03 PQ: 0 ANSI: 5
[ 117.472000] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW LDW-851S GS08 PQ: 0 ANSI: 5
[ 117.472000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20
[ 117.472000] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 117.472000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
[ 117.472000] ohci_hcd 0000:00:03.2: irq 20, io mem 0xdded6000
[ 117.528000] usb usb4: configuration #1 chosen from 1 choice
[ 117.528000] hub 4-0:1.0: USB hub found
[ 117.528000] hub 4-0:1.0: 2 ports detected
[ 117.632000] sata_sis 0000:00:05.0: version 0.7
[ 117.632000] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 117.632000] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset
[ 117.632000] ata3: SATA max UDMA/133 cmd 0x0001b400 ctl 0x0001b002 bmdma 0x0001a000 irq 21
[ 117.632000] ata4: SATA max UDMA/133 cmd 0x0001a800 ctl 0x0001a402 bmdma 0x0001a008 irq 21
[ 117.632000] scsi2 : sata_sis
[ 117.936000] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 118.152000] usb 4-1: configuration #1 chosen from 1 choice
[ 118.160000] usbcore: registered new interface driver hiddev
[ 118.172000] input: Logitech USB Receiver as /class/input/input1
[ 118.172000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:03.2-1
[ 118.180000] input: Logitech USB Receiver as /class/input/input2
[ 118.180000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:03.2-1
[ 118.180000] usbcore: registered new interface driver usbhid
[ 118.180000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 119.840000] ata3: SATA link down (SStatus 1 SControl 300)
[ 119.840000] ATA: abnormal status 0x7F on port 0x0001b407
[ 119.844000] scsi3 : sata_sis
[ 122.052000] ata4: SATA link down (SStatus 1 SControl 300)
[ 122.060000] ATA: abnormal status 0x7F on port 0x0001a807
[ 122.072000] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 122.072000] sda: Write Protect is off
[ 122.072000] sda: Mode Sense: 00 3a 00 00
[ 122.072000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 122.072000] SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
[ 122.072000] sda: Write Protect is off
[ 122.072000] sda: Mode Sense: 00 3a 00 00
[ 122.072000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 122.072000] sda: sda1 sda2 < sda5 >
[ 122.104000] sd 0:0:0:0: Attached scsi disk sda
[ 122.108000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 122.108000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 122.108000] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 122.108000] Uniform CD-ROM driver Revision: 3.20
[ 122.108000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 122.296000] Attempting manual resume
[ 122.296000] swsusp: Resume From Partition 8:5
[ 122.296000] PM: Checking swsusp image.
[ 122.300000] PM: Resume from disk failed.
[ 122.344000] kjournald starting. Commit interval 5 seconds
[ 122.344000] EXT3-fs: mounted filesystem with ordered data mode.
[ 129.332000] ath_hal: module license 'Proprietary' taints kernel.
[ 129.332000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 129.484000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 129.552000] wlan: 0.8.4.2 (0.9.3)
[ 129.568000] ath_pci: 0.9.4.5 (0.9.3)
[ 129.568000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 130.196000] input: PC Speaker as /class/input/input3
[ 130.244000] ath_rate_sample: 1.2 (0.9.3)
[ 130.244000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 130.244000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 130.244000] wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 130.244000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 130.244000] wifi0: mac 7.9 phy 4.5 radio 5.6
[ 130.244000] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 130.244000] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 130.244000] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 130.244000] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 130.244000] wifi0: Use hw queue 8 for CAB traffic
[ 130.244000] wifi0: Use hw queue 9 for beacons
[ 130.248000] NET: Registered protocol family 17
[ 130.280000] Linux agpgart interface v0.102 (c) Dave Jones
[ 130.304000] wifi0: Atheros 5212: mem=0xddec0000, irq=21
[ 130.304000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 130.316000] parport: PnPBIOS parport detected.
[ 130.316000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 130.512000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 22
[ 130.832000] intel8x0_measure_ac97_clock: measured 55787 usecs
[ 130.832000] intel8x0: clocking to 48000
[ 130.944000] fuse init (API version 7.8)
[ 130.968000] lp0: using parport0 (interrupt-driven).
[ 131.052000] Adding 7598704k swap on /dev/disk/by-uuid/e2842fca-ac40-48a7-8956-af59a4963504. Priority:-1 extents:1 across:7598704k
[ 131.204000] EXT3 FS on sda1, internal journal
[ 135.112000] input: Power Button (FF) as /class/input/input4
[ 135.112000] ACPI: Power Button (FF) [PWRF]
[ 135.116000] input: Power Button (CM) as /class/input/input5
[ 135.116000] ACPI: Power Button (CM) [PWRB]
[ 135.208000] ibm_acpi: ec object not found
[ 135.256000] No dock devices found.
[ 135.300000] Using specific hotkey driver
[ 135.456000] pcc_acpi: loading...
[ 135.632000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (version 2.00.00)
[ 135.632000] powernow-k8: MP systems not supported by PSB BIOS structure
[ 135.632000] powernow-k8: MP systems not supported by PSB BIOS structure
[ 139.096000] ppdev: user-space parallel port driver
[ 139.652000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 139.652000] apm: disabled - APM is not SMP safe.
[ 140.144000] Bluetooth: Core ver 2.11
[ 140.144000] NET: Registered protocol family 31
[ 140.144000] Bluetooth: HCI device and connection manager initialized
[ 140.144000] Bluetooth: HCI socket layer initialized
[ 140.172000] Bluetooth: L2CAP ver 2.8
[ 140.172000] Bluetooth: L2CAP socket layer initialized
[ 140.312000] Bluetooth: RFCOMM socket layer initialized
[ 140.312000] Bluetooth: RFCOMM TTY layer initialized
[ 140.312000] Bluetooth: RFCOMM ver 1.8
[ 173.096000] NET: Registered protocol family 10
[ 173.096000] lo: Disabled Privacy Extensions
[ 173.096000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 183.280000] ath0: no IPv6 routers present
[ 291.312000] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 306.288000] ath0: no IPv6 routers present
michael@michael-desktop:~$