rendered paste bodyCPU 2/2 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 2212 stepping 02
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 3999.65 BogoMIPS (lpj=1999827)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 2212 stepping 02
Brought up 4 CPUs
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=248 bytes
sizeof(task_struct)=1888 bytes
migration_cost=765
Time: 20:24:53 Date: 06/09/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:06.0
Boot video device is 0000:07:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:08: iomem range 0xf9d80000-0xf9dbffff has been reserved
pnp: 00:08: iomem range 0xfee01000-0xfeefffff has been reserved
pnp: 00:0a: ioport range 0xca0-0xcaf has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0d: ioport range 0xa00-0xa7f has been reserved
pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0f: iomem range 0xc0000-0xcffff has been reserved
pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
PCI: Bridge: 0000:00:06.0
IO window: c000-cfff
MEM window: f9e00000-f9efffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: d000-dfff
MEM window: f9f00000-fbffffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0f.0
IO window: e000-efff
MEM window: fc000000-febfffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3214k freed
audit: initializing netlink socket (disabled)
audit(1184012692.735:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 8061118429C58D90
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0a.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:00:0f.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0f.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 4 Dual-Core AMD Opteron(tm) Processor 2212 processors (version 2.00.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
Magic number: 15:178:447
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 316k freed
Write protecting the kernel read-only data: 1032k
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 23, io mem 0xf9dfb000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfac00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
SCSI subsystem initialized
libata version 2.20 loaded.
sata_nv 0000:00:05.0: version 3.3
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:05.0 to 64
ata1: SATA max UDMA/133 cmd 0x000000000001b480 ctl 0x000000000001b402 bmdma 0x000000000001ac00 irq 21
ata2: SATA max UDMA/133 cmd 0x000000000001b080 ctl 0x000000000001b002 bmdma 0x000000000001ac08 irq 21
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1)
ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448
ata1.00: configured for UDMA/133
scsi1 : sata_nv
usb 1-1: new low speed USB device using ohci_hcd and address 2
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x000000000001b087
scsi 0:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:05.1 to 64
ata3: SATA max UDMA/133 cmd 0x000000000001a880 ctl 0x000000000001a802 bmdma 0x000000000001a080 irq 20
ata4: SATA max UDMA/133 cmd 0x000000000001a480 ctl 0x000000000001a402 bmdma 0x000000000001a088 irq 20
scsi2 : sata_nv
usb 1-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-1
drivers/usb/input/hid-core.c: Fixing up Logitech S510 report descriptor
input: Logitech USB Receiver as /class/input/input2
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1
ata3: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x000000000001a887
scsi3 : sata_nv
usb 1-3: new full speed USB device using ohci_hcd and address 3
usb 1-3: configuration #1 chosen from 1 choice
ata4: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x000000000001a487
ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:05.2 to 64
ata5: SATA max UDMA/133 cmd 0x000000000001a000 ctl 0x0000000000019c02 bmdma 0x0000000000019480 irq 23
ata6: SATA max UDMA/133 cmd 0x0000000000019880 ctl 0x0000000000019802 bmdma 0x0000000000019488 irq 23
scsi4 : sata_nv
ata5: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x000000000001a007
scsi5 : sata_nv
ata6: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000019887
pata_amd 0000:00:04.0: version 0.2.8
PCI: Setting latency timer of device 0000:00:04.0 to 64
ata7: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
ata8: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
scsi6 : pata_amd
ata7.00: ATAPI, max UDMA/66
ata7.00: configured for UDMA/66
scsi7 : pata_amd
ata8: port disabled. ignoring.
scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-109 1.40 PQ: 0 ANSI: 5
XFS mounting filesystem sda3
Starting XFS recovery on filesystem: sda3 (logdev: internal)
Ending XFS recovery on filesystem: sda3 (logdev: internal)
audit(1184012702.225:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1823 types, 79 bools, 1 sens, 1024 cats
security: 61 classes, 68327 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type xfs), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1184012702.327:3): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 6:0:0:0: Attached scsi generic sg1 type 5
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 6:0:0:0: Attached scsi CD-ROM sr0
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00
input: PC Speaker as /class/input/input3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.0.1 Jun 12 2007
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:08.0
ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:09.0 to 64
forcedeth: using HIGHDMA
eth1: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:09.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
nvidia: module license 'NVIDIA' taints kernel.
fw_ohci: Added fw-ohci device 0000:01:05.0, OHCI version 1.10
PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNEC] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNEC] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:02:00.0 to 64
ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 17
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNEB] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:07:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22 PDT 2007
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:06.1 to 64
hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
fw_core: created new fw device fw0 (0 config rom retries)
SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
loop: loaded (max 8 devices)
lp: driver loaded but no devices found
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
No dock devices found.
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
XFS mounting filesystem sda6
Starting XFS recovery on filesystem: sda6 (logdev: internal)
Ending XFS recovery on filesystem: sda6 (logdev: internal)
SELinux: initialized (dev sda6, type xfs), uses xattr
XFS mounting filesystem sda2
Starting XFS recovery on filesystem: sda2 (logdev: internal)
Ending XFS recovery on filesystem: sda2 (logdev: internal)
SELinux: initialized (dev sda2, type xfs), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 4192924k swap on /dev/sda5. Priority:-1 extents:1 across:4192924k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
audit(1184012731.848:4): audit_pid=2212 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
eth0: no IPv6 routers present
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bridge firewalling registered
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=258 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=238
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=258 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=238
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=258 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=238
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=215 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=195
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=283 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=263
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=283 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=263
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=283 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=263
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=394 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=374
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=171 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=151
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=394 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=374
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=215 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=195
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=380 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=360
Unknown OutputIN= OUT=virbr0 SRC=192.168.122.1 DST=224.0.0.251 LEN=100 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=80
virbr0: no IPv6 routers present