rendered paste bodyboxemall@X-MACHINE:~$ cat /proc/interrupts
CPU0
0: 6596641 XT-PIC timer
1: 7869 XT-PIC i8042
2: 0 XT-PIC cascade
5: 163913 XT-PIC eth0
6: 100004 XT-PIC uhci_hcd:usb1, uhci_hcd:usb2, ICE1712
7: 1 XT-PIC parport0
8: 3 XT-PIC rtc
10: 311 XT-PIC ide2, ohci1394
12: 122328 XT-PIC i8042
14: 73467 XT-PIC ide0
15: 232521 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
boxemall@X-MACHINE:~$ dmesg
[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[4294667.296000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
[4294667.296000] BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
[4294667.296000] BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
[4294667.296000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 131052
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126956 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: acpi=off root=/dev/hdb1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01402000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[ 0.000000] Detected 1009.160 MHz processor.
[ 26.423649] Using tsc for high-res timesource
[ 26.424967] Console: colour VGA+ 80x25
[ 26.426526] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 26.429934] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 26.461288] Memory: 508592k/524208k available (1976k kernel code, 15028k reserved, 606k data, 288k init, 0k highmem)
[ 26.461295] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 26.520662] Calibrating delay using timer specific routine.. 2020.50 BogoMIPS (lpj=1010254)
[ 26.520721] Security Framework v1.0.0 initialized
[ 26.520736] SELinux: Disabled at boot.
[ 26.520759] Mount-cache hash table entries: 512
[ 26.520947] CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
[ 26.520960] CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
[ 26.520973] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)[ 26.520979] CPU: L2 Cache: 256K (64 bytes/line)
[ 26.520982] CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
[ 26.521010] mtrr: v2.0 (20020519)
[ 26.521017] CPU: AMD Athlon(tm) Processor stepping 02
[ 26.521023] Enabling fast FPU save and restore... done.
[ 26.521031] Checking 'hlt' instruction... OK.
[ 26.524930] checking if image is initramfs... it is
[ 27.636797] Freeing initrd memory: 6837k freed
[ 27.658131] NET: Registered protocol family 16
[ 27.658180] EISA bus registered
[ 27.659659] PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
[ 27.659673] PCI: Using configuration type 1
[ 27.660384] ACPI: Subsystem revision 20051216
[ 27.660389] ACPI: Interpreter disabled.
[ 27.660396] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.660408] pnp: PnP ACPI: disabled
[ 27.660415] PnPBIOS: Scanning system for PnP BIOS support...
[ 27.661068] PnPBIOS: Found PnP BIOS installation structure at 0xc00fc4f0
[ 27.661082] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc520, dseg 0xf0000[ 27.662372] PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
[ 27.662403] PCI: Probing PCI hardware
[ 27.662410] PCI: Probing PCI hardware (bus 00)
[ 27.662850] PCI quirk: region e400-e4ff claimed by vt82c586 ACPI
[ 27.662857] PCI quirk: region e200-e27f claimed by vt82c686 HW-mon
[ 27.662863] PCI quirk: region e800-e80f claimed by vt82c686 SMB
[ 27.663209] Boot video device is 0000:01:00.0
[ 27.664000] PCI: Using IRQ router VIA [1106/0686] at 0000:00:04.0
[ 27.673336] pnp: 00:12: ioport range 0xe400-0xe47f has been reserved
[ 27.673343] pnp: 00:12: ioport range 0xe800-0xe83f could not be reserved
[ 27.673654] PCI: Bridge: 0000:00:01.0
[ 27.673659] IO window: disabled.
[ 27.673666] MEM window: ce000000-cfdfffff
[ 27.673671] PREFETCH window: cff00000-e3ffffff
[ 27.673691] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 27.674347] audit: initializing netlink socket (disabled)
[ 27.674364] audit(1149258182.452:1): initialized
[ 27.674558] VFS: Disk quotas dquot_6.5.1
[ 27.674602] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 27.674702] Initializing Cryptographic API
[ 27.674712] io scheduler noop registered
[ 27.674720] io scheduler anticipatory registered
[ 27.674728] io scheduler deadline registered
[ 27.674745] io scheduler cfq registered
[ 27.674756] PCI: Disabling Via external APIC routing
[ 27.675014] isapnp: Scanning for PnP cards...
[ 28.032380] isapnp: No Plug & Play device found
[ 28.053754] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 28.057193] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 28.057553] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.057612] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 28.057778] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.057937] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 28.060738] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.060995] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 28.061847] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 28.061935] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 28.061943] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 28.062253] mice: PS/2 mouse device common for all mice
[ 28.062988] EISA: Probing bus 0 at eisa.0
[ 28.063029] Cannot allocate resource for EISA slot 7
[ 28.063033] Cannot allocate resource for EISA slot 8
[ 28.063037] EISA: Detected 0 cards.
[ 28.063162] NET: Registered protocol family 2
[ 28.073176] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 28.073475] TCP established hash table entries: 32768 (order: 5, 131072 bytes)
[ 28.074024] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[ 28.074625] TCP: Hash tables configured (established 32768 bind 32768)
[ 28.074631] TCP reno registered
[ 28.074764] TCP bic registered
[ 28.074781] NET: Registered protocol family 1
[ 28.074795] NET: Registered protocol family 8
[ 28.074798] NET: Registered protocol family 20
[ 28.074835] Using IPI Shortcut mode
[ 28.074901] Freeing unused kernel memory: 288k freed
[ 28.102012] input: AT Translated Set 2 keyboard as /class/input/input0
[ 28.189585] vga16fb: initializing
[ 28.189597] vga16fb: mapped to 0xc00a0000
[ 28.324600] Console: switching to colour frame buffer device 80x25
[ 28.324609] fb0: VGA16 VGA frame buffer device
[ 29.449779] Capability LSM initialized
[ 30.479113] VP_IDE: IDE controller at PCI slot 0000:00:04.1
[ 30.479152] VP_IDE: chipset revision 16
[ 30.479157] VP_IDE: not 100% native mode: will probe irqs later
[ 30.479178] VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1
[ 30.479194] ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
[ 30.479223] ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
[ 30.479243] Probing IDE interface ide0...
[ 30.864320] hda: HDS722580VLAT20, ATA DISK drive
[ 31.119055] hdb: IBM-DPTA-372050, ATA DISK drive
[ 31.171082] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 31.171511] Probing IDE interface ide1...
[ 31.964203] hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
[ 32.677467] hdd: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
[ 32.729465] ide1 at 0x170-0x177,0x376 on irq 15
[ 32.741775] hda: max request size: 1024KiB
[ 32.771931] hda: 160836480 sectors (82348 MB) w/1794KiB Cache, CHS=16383/255/63, UDMA(66)
[ 32.772318] hda: cache flushes supported
[ 32.772628] hda: hda1 hda2 < hda5 hda6 >
[ 32.804431] hdb: max request size: 128KiB
[ 32.829685] hdb: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63, UDMA(66)
[ 32.829695] hdb: cache flushes not supported
[ 32.829855] hdb: hdb1 hdb2 < hdb5 >
[ 32.857718] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
[ 32.857735] Uniform CD-ROM driver Revision: 3.20
[ 32.861226] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 33.325907] PDC20265: IDE controller at PCI slot 0000:00:11.0
[ 33.325941] PCI: Found IRQ 10 for device 0000:00:11.0
[ 33.325967] PCI: Sharing IRQ 10 with 0000:00:0b.0
[ 33.325993] PDC20265: chipset revision 2
[ 33.325999] PDC20265: ROM enabled at 0x30010000
[ 33.326003] PDC20265: 100% native mode on irq 10
[ 33.326017] PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
[ 33.326023] ide2: BM-DMA at 0x7400-0x7407, BIOS settings: hde:pio, hdf:pio
[ 33.326046] ide3: BM-DMA at 0x7408-0x740f, BIOS settings: hdg:pio, hdh:DMA
[ 33.326064] Probing IDE interface ide2...
[ 33.589535] hde: WDC WD1200JB-75CRA0, ATA DISK drive
[ 33.844273] hdf: WDC WD1200JB-00CRA1, ATA DISK drive
[ 33.899542] ide2 at 0x8800-0x8807,0x8402 on irq 10
[ 33.899834] hde: max request size: 128KiB
[ 33.916989] hde: Host Protected Area detected.
[ 33.916992] current capacity is 234375000 sectors (120000 MB)
[ 33.916995] native capacity is 234375120 sectors (120000 MB)
[ 33.920176] hde: Host Protected Area disabled.
[ 33.920183] hde: 234375120 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[ 33.920194] hde: cache flushes not supported
[ 33.920369] hde: hde1 hde2 hde3
[ 33.923748] hdf: max request size: 128KiB
[ 33.933675] hdf: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[ 33.933683] hdf: cache flushes not supported
[ 33.933829] hdf: hdf1
[ 33.941652] Probing IDE interface ide3...
[ 34.870745] usbcore: registered new driver usbfs
[ 34.871223] usbcore: registered new driver hub
[ 34.874101] USB Universal Host Controller Interface driver v2.3
[ 34.874629] PCI: IRQ 6 for device 0000:00:04.2 doesn't match PIRQ mask - try pci=usepirqmask
[ 34.874637] PCI: Found IRQ 6 for device 0000:00:04.2
[ 34.874656] PCI: Sharing IRQ 6 with 0000:00:04.3
[ 34.874671] PCI: Sharing IRQ 6 with 0000:00:0d.0
[ 34.874698] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 34.875477] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 35.530930] irq 6: nobody cared (try booting with the "irqpoll" option)
[ 35.530947] [<c013ee42>] __report_bad_irq+0x22/0x80
[ 35.530973] [<c013ef38>] note_interrupt+0x68/0xc0
[ 35.530982] [<c013e7fc>] __do_IRQ+0xbc/0xe0
[ 35.530992] [<c010597a>] do_IRQ+0x1a/0x30
[ 35.531003] [<c01040ea>] common_interrupt+0x1a/0x20
[ 35.531012] [<c0121520>] __do_softirq+0x30/0xb0
[ 35.531021] [<c01215d5>] do_softirq+0x35/0x40
[ 35.531027] [<c0121685>] irq_exit+0x35/0x40
[ 35.531033] [<c010597f>] do_IRQ+0x1f/0x30
[ 35.531040] [<c01040ea>] common_interrupt+0x1a/0x20
[ 35.531048] [<c013ea7c>] setup_irq+0x9c/0x120
[ 35.531057] [<e08bc330>] usb_hcd_irq+0x0/0x60 [usbcore]
[ 35.531134] [<c013ec5b>] request_irq+0x7b/0xa0
[ 35.531144] [<e08bc5cc>] usb_add_hcd+0xdc/0x3a0 [usbcore]
[ 35.531175] [<e08bc330>] usb_hcd_irq+0x0/0x60 [usbcore]
[ 35.531205] [<e08c4834>] usb_hcd_pci_probe+0x194/0x2d0 [usbcore]
[ 35.531243] [<c01e6f2c>] __pci_device_probe+0x3c/0x60
[ 35.531263] [<c01e6f6f>] pci_device_probe+0x1f/0x40
[ 35.531272] [<c024440b>] driver_probe_device+0x3b/0xc0
[ 35.531290] [<c0244500>] __driver_attach+0x0/0x40
[ 35.531298] [<c024453b>] __driver_attach+0x3b/0x40
[ 35.531306] [<c0243ae8>] bus_for_each_dev+0x48/0x80
[ 35.531316] [<c0244555>] driver_attach+0x15/0x20
[ 35.531323] [<c0244500>] __driver_attach+0x0/0x40
[ 35.531331] [<c0243f89>] bus_add_driver+0x69/0xc0
[ 35.531339] [<c01e71ba>] __pci_register_driver+0x6a/0xa0
[ 35.531347] [<e082805f>] uhci_hcd_init+0x5f/0xf1 [uhci_hcd]
[ 35.531365] [<c01381cf>] sys_init_module+0x9f/0x1d0
[ 35.531374] [<c0103089>] syscall_call+0x7/0xb
[ 35.531383] handlers:
[ 35.531386] [<e08bc330>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 35.531415] Disabling IRQ #6
[ 35.567830] ieee1394: Initialized config rom entry `ip1394'
[ 35.585178] uhci_hcd 0000:00:04.2: irq 6, io base 0x0000d400
[ 35.585740] hub 1-0:1.0: USB hub found
[ 35.585763] hub 1-0:1.0: 2 ports detected
[ 35.686536] PCI: IRQ 6 for device 0000:00:04.3 doesn't match PIRQ mask - try pci=usepirqmask
[ 35.686544] PCI: Found IRQ 6 for device 0000:00:04.3
[ 35.686558] PCI: Sharing IRQ 6 with 0000:00:04.2
[ 35.686576] PCI: Sharing IRQ 6 with 0000:00:0d.0
[ 35.686602] uhci_hcd 0000:00:04.3: UHCI Host Controller
[ 35.686769] uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
[ 35.686780] uhci_hcd 0000:00:04.3: irq 6, io base 0x0000d000
[ 35.687161] hub 2-0:1.0: USB hub found
[ 35.687179] hub 2-0:1.0: 2 ports detected
[ 35.789734] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[ 35.789766] PCI: Found IRQ 10 for device 0000:00:0b.0
[ 35.789802] PCI: Sharing IRQ 10 with 0000:00:11.0
[ 35.841861] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[cd000000-cd0007ff] Max Packet=[2048]
[ 35.892126] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 35.897138] Probing IDE interface ide3...
[ 36.508862] Attempting manual resume
[ 36.545743] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.573012] kjournald starting. Commit interval 5 seconds
[ 37.100281] ieee1394: Host added: ID:BUS[0-00:1023] GUID[005042f6036028ac]
[ 38.933128] hub 1-1:1.0: USB hub found
[ 39.432523] hub 1-1:1.0: 4 ports detected
[ 41.237649] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 44.237587] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 47.275614] hub 2-2:1.0: USB hub found
[ 47.775006] hub 2-2:1.0: 4 ports detected
[ 52.169533] usb 1-1.3: new full speed USB device using uhci_hcd and address 4[ 54.198850] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[ 54.198947] PCI: Found IRQ 5 for device 0000:00:0a.0
[ 54.203019] eth0: VIA Rhine II at 0x1a400, 00:05:5d:f5:e6:d9, IRQ 5.
[ 54.203782] eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1.
[ 54.257705] Linux agpgart interface v0.101 (c) Dave Jones
[ 54.269404] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
[ 54.276222] agpgart: AGP aperture is 64M @ 0xe4000000
[ 54.321347] parport_pc: VIA 686A/8231 detected
[ 54.321356] parport_pc: probing current configuration
[ 54.321389] parport_pc: Current parallel port base: 0x378
[ 54.321532] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 54.404273] parport_pc: VIA parallel port: io=0x378, irq=7
[ 54.412895] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 54.422211] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 54.433389] i2c_adapter i2c-9191: sensors disabled - enable with force_addr=0xe200
[ 54.724361] PCI: IRQ 6 for device 0000:00:0d.0 doesn't match PIRQ mask - try pci=usepirqmask
[ 54.724372] PCI: Found IRQ 6 for device 0000:00:0d.0
[ 54.724387] PCI: Sharing IRQ 6 with 0000:00:04.2
[ 54.724395] PCI: Sharing IRQ 6 with 0000:00:04.3
[ 54.785932] Consumer PCM code does not work well at the moment --jk
[ 57.667311] Real Time Clock Driver v1.12
[ 57.759616] nvidia: module license 'NVIDIA' taints kernel.
[ 58.062024] input: PS2++ Logitech Wheel Mouse as /class/input/input1
[ 58.446661] input: PC Speaker as /class/input/input2
[ 58.613962] AC'97 0 does not respond - RESET
[ 59.042263] AC'97 0 access is not valid [0xffffffff], removing mixer.
[ 59.042281] ice1712: cannot initialize ac97 for consumer, skipped
[ 59.049251] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8756 Wed Mar 29 14:26:26 PST 2006
[ 59.714661] ts: Compaq touchscreen protocol output
[ 60.161337] usb 1-1.4: new low speed USB device using uhci_hcd and address 5
[ 60.399289] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 60.437003] SCSI subsystem initialized
[ 60.491645] Initializing USB Mass Storage driver...
[ 61.474686] NET: Registered protocol family 17
[ 62.754927] NET: Registered protocol family 10
[ 62.755160] lo: Disabled Privacy Extensions
[ 62.755449] IPv6 over IPv4 tunneling driver
[ 64.222450] scsi0 : SCSI emulation for USB Mass Storage devices
[ 64.222773] usb-storage: device found at 4
[ 64.222778] usb-storage: waiting for device to settle before scanning
[ 64.222827] usbcore: registered new driver usb-storage
[ 64.222833] USB Mass Storage support registered.
[ 65.008084] usbcore: registered new driver hiddev
[ 67.653893] input: Saitek PLC Cyborg Force Rumble Pad as /class/input/input3
[ 67.654078] input: USB HID v1.10 Joystick [Saitek PLC Cyborg Force Rumble Pad] on usb-0000:00:04.2-1.4
[ 67.654100] usbcore: registered new driver usbhid
[ 67.654106] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 68.303262] lp0: using parport0 (interrupt-driven).
[ 68.361052] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[ 68.361062] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 68.361066] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 68.479916] Adding 851404k swap on /dev/hdb5. Priority:-1 extents:1 across:851404k
[ 68.663095] EXT3 FS on hdb1, internal journal
[ 68.931391] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 68.931400] md: bitmap version 4.39
[ 69.789314] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 70.151205] Vendor: USB 2.0 Model: Memory Adapter Rev:
[ 70.151225] Type: Direct-Access ANSI SCSI revision: 02
[ 70.153688] usb-storage: device scan complete
[ 70.171091] cdrom: open failed.
[ 70.211221] Driver 'sd' needs updating - please use bus_type methods
[ 70.720137] cdrom: open failed.
[ 70.727044] cdrom: open failed.
[ 71.399894] SCSI device sda: 503808 512-byte hdwr sectors (258 MB)
[ 72.177952] sda: Write Protect is off
[ 72.177964] sda: Mode Sense: 03 00 00 00
[ 72.177970] sda: assuming drive cache: write through
[ 73.390772] eth0: no IPv6 routers present
[ 75.146049] SCSI device sda: 503808 512-byte hdwr sectors (258 MB)
[ 75.895309] sda: Write Protect is off
[ 75.895322] sda: Mode Sense: 03 00 00 00
[ 75.895328] sda: assuming drive cache: write through
[ 75.895339] sda: sda1 sda2
[ 76.645971] sd 0:0:0:0: Attached scsi removable disk sda
[ 76.683087] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 78.285639] powernow: No powernow capabilities detected
[ 85.222763] ppdev: user-space parallel port driver
[ 85.531504] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 87.618971] uhci_hcd 0000:00:04.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 87.673731] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 87.673748] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 87.673754] ide: failed opcode was: 0xec
[ 87.683458] hdc: drive_cmd: status=0x41 { DriveReady Error }
[ 87.683473] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 87.683479] ide: failed opcode was: 0xe3
[ 87.696616] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 87.696632] hdd: drive_cmd: error=0x04 { AbortedCommand }
[ 87.696637] ide: failed opcode was: 0xec
[ 117.513743] Bluetooth: Core ver 2.8
[ 117.513756] NET: Registered protocol family 31
[ 117.513760] Bluetooth: HCI device and connection manager initialized
[ 117.513784] Bluetooth: HCI socket layer initialized
[ 117.689889] Bluetooth: L2CAP ver 2.8
[ 117.689900] Bluetooth: L2CAP socket layer initialized
[ 117.709374] Bluetooth: RFCOMM socket layer initialized
[ 117.709407] Bluetooth: RFCOMM TTY layer initialized
[ 117.709411] Bluetooth: RFCOMM ver 1.7
ubuntu@ubuntu:~$
boxemall@X-MACHINE:~$ lsmod
Module Size Used by
rfcomm 40216 0
l2cap 26244 5 rfcomm
bluetooth 49892 4 rfcomm,l2cap
apm 21228 1
ppdev 9220 0
cpufreq_userspace 4696 0
cpufreq_stats 5636 0
freq_table 4740 1 cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 6428 0
cpufreq_conservative 7332 0
sg 37920 0
sd_mod 19984 0
dm_mod 58936 1
md_mod 72532 0
sr_mod 16932 0
sbp2 24196 0
lp 11844 0
joydev 10048 0
usbhid 38368 0
ipv6 265600 6
af_packet 22920 2
usb_storage 74176 0
scsi_mod 139496 5 sg,sd_mod,sr_mod,sbp2,usb_storage
tsdev 8000 0
pcspkr 2180 0
nvidia 4545076 0
serio_raw 7300 0
psmouse 36228 0
rtc 13492 0
snd_ice1712 65252 3
snd_ice17xx_ak4xxx 4480 1 snd_ice1712
snd_ak4xxx_adda 6528 2 snd_ice1712,snd_ice17xx_ak4xxx
snd_cs8427 9984 1 snd_ice1712
snd_ac97_codec 92704 1 snd_ice1712
snd_pcm_oss 53664 0
snd_mixer_oss 18688 1 snd_pcm_oss
snd_pcm 89864 4 snd_ice1712,snd_ac97_codec,snd_pcm_oss
snd_timer 25220 2 snd_pcm
snd_page_alloc 10632 1 snd_pcm
snd_ac97_bus 2304 1 snd_ac97_codec
snd_i2c 5632 2 snd_ice1712,snd_cs8427
snd_mpu401_uart 7808 1 snd_ice1712
snd_rawmidi 25504 1 snd_mpu401_uart
snd_seq_device 8716 1 snd_rawmidi
via686a 17672 0
shpchp 45632 0
pci_hotplug 29236 1 shpchp
snd 55268 16 snd_ice1712,snd_ak4xxx_adda,snd_cs8427,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_i2c,snd_mpu401_uart,snd_rawmidi,snd_seq_device
parport_pc 35780 1
via_agp 9856 1
agpgart 34888 2 nvidia,via_agp
i2c_isa 4992 1 via686a
i2c_viapro 8980 0
via_rhine 23940 0
i2c_core 21904 4 nvidia,via686a,i2c_isa,i2c_viapro
mii 5888 1 via_rhine
soundcore 10208 1 snd
parport 36296 3 ppdev,lp,parport_pc
evdev 9856 1
ext3 135688 1
jbd 58772 1 ext3
ide_generic 1536 0
ohci1394 35124 0
ieee1394 299832 2 sbp2,ohci1394
uhci_hcd 33680 0
usbcore 129668 4 usbhid,usb_storage,uhci_hcd
pdc202xx_old 11392 1
ide_cd 33028 0
cdrom 38560 2 sr_mod,ide_cd
ide_disk 17664 6
via82cxxx 9988 0 [permanent]
generic 5124 0
processor 23360 0
capability 5000 0
commoncap 7296 1 capability
vga16fb 13704 1
vgastate 10368 1 vga16fb
fbcon 42784 72
tileblit 2816 1 fbcon
font 8320 1 fbcon
bitblit 6272 1 fbcon
softcursor 2304 1 bitblit
no sound/ dapper (DMX6Fire)
OS behaves unstable.
VIA Chipset kt133