rendered paste body[root@localhost ~]# wanrouter stop
Shutting down wanpipe1 interface: w1g1
w1g1: unknown interface: No such device
Shutting down device: wanpipe1
No devices running, Unloading Modules
[root@localhost ~]# wanrouter stopJul 6 16:00:04 localhost kernel:
Jul 6 16:00:04 localhost kernel: wanpipe1: Shutting Down!
Jul 6 16:00:04 localhost kernel: wanpipe1: T1 Front End unconfigation!
Jul 6 16:00:04 localhost kernel: wanpipe1: AFT communications disabled!
Jul 6 16:00:04 localhost kernel: wanpipe1: Unregisterd HWEC
Jul 6 16:00:04 localhost kernel: wanpipe1: Unregister interface from wanec1 (chip id 1, usage 1)!
Jul 6 16:00:04 localhost kernel: wanpipe1: T1 Front End unconfigation!
Jul 6 16:00:04 localhost kernel: wanpipe1: Global Chip Shutdown Usage=1
Jul 6 16:00:04 localhost kernel: wanpipe1: Global T1 Front End unconfigation!
Jul 6 16:00:04 localhost kernel: wanpipe1: Master shutting down
Jul 6 16:00:04 localhost kernel: af_wanpipe: Unregistering Wanpipe API Socket Module
Jul 6 16:00:04 localhost kernel: NET: Unregistered protocol family 25
Jul 6 16:00:04 localhost kernel: wanec_remove_dev: Unregistering Wanpipe ECDEV Device!
Jul 6 16:00:04 localhost kernel: WANEC Layer: Unloaded
Jul 6 16:00:04 localhost kernel: WANPIPE L.I.P: Unloaded
Jul 6 16:00:04 localhost kernel:
Jul 6 16:00:04 localhost kernel: wanpipe: WANPIPE Modules Unloaded.
[root@localhost ~]#
[root@localhost ~]# wanrouter start
Starting WAN Router...
Loading WAN drivers: wanpipe done.
Starting up device: wanpipe1
wanconfig: Interface w1g1 setup failed
: ioctl(ROUTER_IFNEW,w1g1) failed:
: 22 - Invalid argument
Wanpipe drivers could not setup network interface
Please check /var/log/wanrouter and
/var/log/messages for errors
Configuring interfaces: w1g1 w1g1: unknown interface: No such device
done.
Jul 6 16:00:10 localhost kernel: WANPIPE(tm) Hardware Support Module Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc
Jul 6 16:00:10 localhost kernel: WANPIPE(tm) Interface Support Module Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc
Jul 6 16:00:10 localhost kernel: WANPIPE(tm) PPP/Cisco HDLC Protocol Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc
Jul 6 16:00:10 localhost kernel: WANPIPE(tm) Multi-Protocol WAN Driver Module Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc
Jul 6 16:00:10 localhost kernel: wanpipe: Probing for WANPIPE hardware.
Jul 6 16:00:10 localhost kernel: wanpipe: AFT-A101-SH T1/E1 card found (HDLC (DS) rev.30), cpu(s) 1, bus #4, slot #4, irq #16
Jul 6 16:00:10 localhost kernel: wanpipe: Allocating maximum 1 devices: wanpipe1 - wanpipe1.
Jul 6 16:00:10 localhost kernel: WANPIPE: TDM Codecs Initialized
Jul 6 16:00:10 localhost kernel: WANPIPE(tm) Socket API Module Stable 2.3.4-10 (c) 1994-2007 Sangoma Technologies Inc
Jul 6 16:00:10 localhost kernel: NET: Registered protocol family 25
Jul 6 16:00:10 localhost kernel: WANPIPE(tm) L.I.P Network Layer Stable 2.3.4-10 (c) 1994-2007
Jul 6 16:00:10 localhost kernel: WanpipeLIP: Protocols: FR PPP CHDLC LIP_ATM
Jul 6 16:00:10 localhost kernel: WANPIPE(tm) WANEC Layer Stable 2.3.4.10 (c) 1995-2006 Sangoma Technologies Inc.
Jul 6 16:00:10 localhost kernel: wanec_create_dev: Registering Wanpipe ECDEV Device!
Jul 6 16:00:10 localhost kernel: wanpipe1: Starting WAN Setup
Jul 6 16:00:10 localhost kernel:
Jul 6 16:00:10 localhost kernel: Processing WAN device wanpipe1...
Jul 6 16:00:10 localhost kernel: wanpipe1: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4
Jul 6 16:00:10 localhost kernel: wanpipe1: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4, Port=0
Jul 6 16:00:10 localhost kernel: wanpipe1: AFT PCI memory at 0xEFCF8000
Jul 6 16:00:10 localhost kernel: wanpipe1: IRQ 16 allocated to the AFT PCI card
Jul 6 16:00:10 localhost kernel: wanpipe1: Starting AFT Quad Hardware Init.
Jul 6 16:00:10 localhost kernel: wanpipe1: Enabling front end link monitor
Jul 6 16:00:10 localhost kernel: wanpipe1: Global Chip Configuration: used=1
Jul 6 16:00:10 localhost kernel: wanpipe1: Global EC Clock Port = 1
Jul 6 16:00:10 localhost kernel: wanpipe1: Global E1 Front End configuration
Jul 6 16:00:10 localhost kernel: wanpipe1: AFT Data Mux Bit Map: 0x01234567
Jul 6 16:00:10 localhost kernel: wanpipe1: Configuring DS DS26521 E1 FE
Jul 6 16:00:10 localhost kernel: wanpipe1: Port 1,HDB3,CRC4,120OH
Jul 6 16:00:10 localhost kernel: wanpipe1: Clk Normal:0, Ch FFFFFFFFFFFFFFFF
Jul 6 16:00:10 localhost kernel: wanpipe1: Sig Mode CCS
Jul 6 16:00:10 localhost kernel: wanpipe1: E1:1: Disable channels:
Jul 6 16:00:10 localhost kernel: wanpipe1: Front end successful
Jul 6 16:00:10 localhost kernel: wanpipe1: Front End Interface Ready 0x40000000
Jul 6 16:00:10 localhost kernel: wanpipe1: Register EC interface wanec1 (usage 1, max ec chans 32)!
Jul 6 16:00:10 localhost kernel: wanpipe1: Configuring Device :wanpipe1 FrmVr=30
Jul 6 16:00:10 localhost kernel: wanpipe1: Global MTU = 1500
Jul 6 16:00:10 localhost kernel: wanpipe1: Global MRU = 1500
Jul 6 16:00:10 localhost kernel: wanpipe1: Data Mux Map = 0x01234567
Jul 6 16:00:10 localhost kernel: wanpipe1: Rx CRC Bytes = 0
Jul 6 16:00:10 localhost kernel: wanpipe1: Global TDM Int = Disabled
Jul 6 16:00:10 localhost kernel: wanpipe1: Global TDM Ring= Disabled
Jul 6 16:00:10 localhost kernel: wanpipe1: TDMV Span = 1 : Enabled
Jul 6 16:00:10 localhost kernel: wanpipe1: Configuring Interface: w1g1
Jul 6 16:00:10 localhost kernel:
Jul 6 16:00:10 localhost kernel: wanpipe1:w1g1: Error: TDM VOICE prot not compiled
Jul 6 16:00:10 localhost kernel: wanpipe1:w1g1: during installation process!
Zaptel Version: 1.4.3
Echo Canceller: MG2
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: Clear channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: D-channel (Default) (Slaves: 24)
24 channels configured.
ZT_SPANCONFIG failed on span 1: No such device or address (6)
[root@localhost ~]# Jul 6 16:00:11 localhost kernel: wanpipe1: E1 disconnected!