rendered paste body<4>Linux version 2.6.11.12_stm20-33 (root@localhost.localdomain) (gcc-Version 3.4.3 (STMicroelectronics/Linux Base 3.4.3-19) [build Mar 10 2006]) #1 Thu Jun 28 11:39:42 CEST 2007
<4>STMicroelectronics STb7100 Marusys MSS-5000 Custom board initialisation
<4>STb7100 version 3.x
<7>On node 0 totalpages: 8192
<7> DMA zone: 8192 pages, LIFO batch:2
<7> Normal zone: 0 pages, LIFO batch:1
<7> HighMem zone: 0 pages, LIFO batch:1
<4>Built 1 zonelists
<4>Kernel command line: console=ttyAS0,115200 root=/dev/nfs nfsroot=/nfs/ufs910 rw ip=192.168.0.30:192.168.0.99:192.168.0.99:255.255.255.0:ben:eth0:off mem=32m bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000 nwhwconf=device:eth0,hwaddr:00:50:FD:FF:4F:40
<3>st-coprocessor: Failed to reserve memory at 0x04000000
<3>st-coprocessor: Failed to reserve memory at 0x04200000
<4>PID hash table entries: 256 (order: 8, 4096 bytes)
<5>Calculated peripheral clock value 66748576 differs from sh_pclk value 66000000, fixing..
<4>PLL1 : 531.00MHz
<4>PLL2 : 400.00MHz
<4>ST40 CPU : 265.50MHz
<4>ST40 BUS : 132.75MHz
<4>ST40 PER : 66.37MHz
<4>SLIM : 265.50MHz
<4>ST231 : 400.00MHz
<4>STBUS : 200.00MHz
<4>EMI : 100.00MHz
<4>LMI : 200.00MHz
<4>FSYN0_CHAN1 : 108.008MHz
<4>FSYN0_CHAN2 : 36.866MHz
<4>FSYN0_CHAN3 : 32.768MHz
<4>FSYN1_CHAN1 : 27.002MHz
<4>FSYN1_CHAN2 : 150.008MHz
<4>FSYN1_CHAN3 : 27.002MHz
<4>FSYN1_CHAN4 : 48.000MHz
<4>CLK_PIX_HD : 108.008MHz
<4>CLK_PIX_SD : 27.002MHz
<4>CLK_DISP_HD : 13.501MHz
<4>CLK_DISP_ID : 13.501MHz
<4>CLK_GDP2 : 27.002MHz
<4>CLK_656 : 27.002MHz
<4>CLK_PIPE : 150.008MHz
<4>CLK_PP : 27.002MHz
<4>CLK_IC_150 : 150.008MHz
<4>CLK_DAA : 32.768MHz
<4>CLK_DSS : 36.866MHz
<4>CLK_LPC : 46.875KHz
<4>CLK_BCH_HDMI : 108.008MHz
<4>CLK_TMDS_HDMI: 27.002MHz
<4>CLK_PIX_HDMI : 13.501MHz
<4>CLK_DVP : VIDINCLK
<4>CLK_RTC : 27.002MHz
<7>TMU0: ticks per jiffy = 16594
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>Memory: 25216k/32768k available (2605k kernel code, 7548k reserved, 272k data, 96k init)
<7>Calibrating delay loop... 262.14 BogoMIPS (lpj=131072)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<4>CPU: STb710x
<6>NET: Registered protocol family 16
<5>SCSI subsystem initialized
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>SH Virtual Bus initialized
<6>bigphysarea: Allocated 1024 pages at 0x84751000.
<6>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
<6>Initializing Cryptographic API
<6>Device probe found data for platform device lirc
<4>lirc_dev: IR Remote Control driver registered, at major 61
<4>lirc_dev: lirc_register_plugin: sample_rate: 0
<6>STM LIRC plugin has IRQ 125
<6> Lirc STM: Using IRB mode
<6>STMicroelectronics LIRC driver configured
<4>STPIO layer initialised
<6>Device probe found data for platform device wdt
<6>STM watchdog initialized
<6>STMicroelectronics ASC driver initialized
<4>asc_init: check the clock
<4>ttyAS0 at MMIO 0xb8032000 (irq = 121) is a asc
<4>asc_init: check the clock
<4>ttyAS1 at MMIO 0xb8033000 (irq = 120) is a asc
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<5>Generic ST boards onboard flash device: 0x01000000 (16.0Mb) at 0x00000000
<7>drivers/mtd/maps/stboards.c init_stboards[193] onboard_map.virt = 0xa0000000
<6>Onboard_Flash: Found 1 x16 devices at 0x0 in 16-bit bank
<6>Onboard_Flash: Found 1 x16 devices at 0x800000 in 16-bit bank
<4> Amd/Fujitsu Extended Query Table at 0x0040
<4>Onboard_Flash: CFI does not contain boot bank location. Assuming top.
<5>number of CFI chips: 2
<5>cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
<5>Creating 8 MTD partitions on "Onboard_Flash":
<5>0x00000000-0x00020000 : "Boot firmware : 0xA000.0000-0xA001.FFFF"
<5>0x00040000-0x00200000 : "Kernel - 0xA004.0000-0xA01F.FFFF"
<5>0x00200000-0x002a0000 : "Config FS - 0xA020.0000-0xA029.FFFF"
<5>0x002a0000-0x004e0000 : "Root FS- 0xA02A.0000-0xA04D.FFFF"
<5>0x004e0000-0x00ae0000 : "APP_Modules 0xA04E.0000-0xA0AD.FFFF"
<5>0x00ae0000-0x00c00000 : "EmergencyRoot 0xA0AE.0000-0xA0BF.FFFF"
<5>0x00c00000-0x01000000 : "OtherData 0xA0C0.0000-0xA0FF.FFFF"
<5>0x00020000-0x00040000 : "BootConfiguration 0xA002.0000-0xA003.FFFF"
<4>ST40_start_host_control
<4>ST40_start_host_control proceeding
<6>drivers/usb/host/ehci-stcore.c: ehci_hcd (ST40) at 0xb91ffe00,irq 169
<4>
<6>ST40-ehci ST40-ehci2: new USB bus registered, assigned bus number 1
<6>ST40-ehci ST40-ehci2: park 0
<6>ST40-ehci ST40-ehci2: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<4> out
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>i2c /dev entries driver
<6>stssc layer initialized
<4>STMicroelectronics - Coprocessors st231 Init
<4>st231-0 Coprocessor -------------------------------------------
<4> flags 0001 RAM start at 0xa4000000 size 0x00200000
<4> cop. addr 0x04000000
<4> Channels : Not defined
<4> IRQ : not used
<4>---------------------------------------------------------------
<4>st231-1 Coprocessor -------------------------------------------
<4> flags 0001 RAM start at 0xa4200000 size 0x00200000
<4> cop. addr 0x04200000
<4> Channels : Not defined
<4> IRQ : not used
<4>---------------------------------------------------------------
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<4>TCP established hash table entries: 2048 (order: 2, 16384 bytes)
<4>TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP: Hash tables configured (established 2048 bind 2048)
<6>NET: Registered protocol family 1
<6>usb 1-1: new high speed USB device using ST40-ehci and address 2
<6>hub 1-1:1.0: USB hub found
<6>hub 1-1:1.0: 4 ports detected
<4>IP-Config: Complete:
<4> device=eth0, addr=192.168.0.30, mask=255.255.255.0, gw=192.168.0.99,
<4> host=ben, domain=, nis-domain=(none),
<4> bootserver=192.168.0.99, rootserver=192.168.0.99, rootpath=
<5>Looking up port of RPC 100003/2 on 192.168.0.99
<5>Looking up port of RPC 100005/1 on 192.168.0.99
<4>VFS: Mounted root (nfs filesystem).
<4>Freeing unused kernel memory: 96k freed
<4>stos_core: module license 'ST Microelectronics' taints kernel.
<6>stos_core_init_module(): Initializing STOS Module
<6>stcommon_core_init_module(): Initializing STCOMMON Module
<4>Setting all Group priorities done
<4>PTI Clock: Cut 3.0 detected -> setting PTI workaround clock.
<4>TC_Ram test...
<4>Writing...
<4>Reading...
<4>ok
<4>Preproc Clock: Cut 3.0 detected -> setting Preproc clock.
<4>
<4>mod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04200000
<1>Load module lxload[254] by insmod (pid 101)
<4>LXLOADER virtual io kernel address of phys 0xa4200000 = 0xa4200000
<4>lxload_open: major=254 minor=0
<4>setting up Audio LX in NON-DEBUG mode
<6>lxload_release: major=254 minor=0
<4>Starting Audio LX by disabling reset
<6>LX loaded:
<4> Base: 0xa4200000
<4> Last: 0xa4347284
<4> Size:1340036
<6>mod_lxload_exit: Exiting LXLOAD kernel Module
<4>The I/O memory region 0xa4200000 is released successfully
<1>Unload module lxload by rmmod (pid 113)
<4>
<4>mod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04000000
<1>Load module lxload[254] by insmod (pid 114)
<4>LXLOADER virtual io kernel address of phys 0xa4000000 = 0xa4000000
<4>lxload_open: major=254 minor=0
<4>setting up LX in NON-DEBUG mode
<6>lxload_release: major=254 minor=0
<4>Starting video LX by disabling reset
<6>LX loaded:
<4> Base: 0xa4000000
<4> Last: 0xa403cb00
<4> Size:248576
<6>mod_lxload_exit: Exiting LXLOAD kernel Module
<4>The I/O memory region 0xa4000000 is released successfully
<1>Unload module lxload by rmmod (pid 124)
<6>stavmem_core_init_module: Initializing STAVMEM CORE Module
<4> Info> Number Of Partitions = 2
<4> Info> Maximum number of memory blocks = 450
<4> Info> Partition used for virtual mapping by default is the partition 0
<4>
<4> Info> Device 'AVMEM' initialised
<4> Info> Partition created on device 'AVMEM'
<4> Info> Partition created on device 'AVMEM'
<4>
<4>STAVMEM initialized, revision=STAVMEM-REL_4.3.1
<4> Partition 0 LMI_SYS Handle=0xc01817d8 Start 0xa6400000 Stop 0xa8000000
<4> Partition 1 LMI_VID Handle=0xc01817ec Start 0xb0000000 Stop 0xb4000000
<4>
<4>Initializing STAPIGAT kernel Module
<1>Load module stapigat[254] by insmod (pid 126)
<1>Load module fdma [253] by insmod (pid 136)
<6>stpio_core_init_module(): Initializing STPIO Module
<1>Load module stpti4_core by insmod (pid 141)
<1>Load module stclkrv_core by insmod (pid 142)
<4>
<4> hdmi_i2c_init : Initializing I2CHDMI kernel Module
<6>stvid_core_init_module: Initializing STVID CORE Module
<6>stvidtest_core_init_module: Initializing STVIDTEST CORE Module
<1>Load module staudlx_core [251] by insmod (pid 168)
<6>sthdmi_ioctl_init_module: Initializing STHDMI IOCTL Module
<1>Load module sthdmi_ioctl[250] by insmod (pid 170)
<6>stvid_ioctl_init_module: Initializing STVID IOCTL Module
<1>Load module stvid_ioctl[249] by insmod (pid 178)
<6>stvidtest_ioctl_init_module: Initializing STVIDTEST IOCTL Module
<1>Load module stvidtest_ioctl[248] by insmod (pid 186)
<1>Unload module stttx_core by insmod (pid 195)
<1>Load module stevt_ioctl [247] by insmod (pid 196)
<6>stblit_ioctl_init_module: Initializing STBLIT IOCTL Module
<1>Load module stblit_ioctl[246] by insmod (pid 204)
<4>stlayer_ioctl_init_module: Initializing STLAYER kernel Module
<1>Load module stlayer_ioctl[245] by insmod (pid 212)
<1>Load module stpti4_ioctl [244] by insmod (pid 220)
<1>Load module stclkrv_ioctl [243] by insmod (pid 228)
<6>stdenc_ioctl_init_module: Initializing STDENC IOCTL Module
<1>Load module stdenc_ioctl[242] by insmod (pid 236)
<6>stvtg_ioctl_init_module: Initializing STVTG IOCTL Module
<1>Load module stvtg_ioctl[241] by insmod (pid 244)
<6>stvout_ioctl_init_module: Initializing STVOUT IOCTL Module
<1>Load module stvout_ioctl[240] by insmod (pid 252)
<6>stvmix_ioctl_init_module: Initializing STVMIX IOCTL Module
<1>Load module stvmix_ioctl[239] by insmod (pid 260)
<6>stvbi_ioctl_init_module: Initializing STVBI kernel Module
<1>Load module stvbi_ioctl[238] by insmod (pid 268)
<1>Load module stmerge_ioctl [237] by insmod (pid 276)
<1>Load module staudlx_ioctl[236] by insmod (pid 284)
<6>stcc_ioctl_init_module: Initializing STCC IOCTL Module
<1>Load module stcc_ioctl[235] by insmod (pid 292)
<1>Load module stttx_ioctl [234] by insmod (pid 300)
<1>Load module stinj_ioctl [233] by insmod (pid 309)
<1>Load module stpio_ioctl [232] by insmod (pid 317)
<4>the adapter name is number 0
<4>
the adapter name is number 1
<4>
<6>i2c_st40_pio: ST40 PIO based I2C Driver
<6>i2c_st40_pio: allocated pin (4,0) for scl (0x84704a6c)
<6>i2c_st40_pio: allocated pin (4,1) for sda (0x84704a7c)
<6>i2c_st40_pio bus 0: SCL=PIO4[0], SDA=PIO4[1]
<4>the adapter name is ST40 (PIO based) number 2
<4>
hdmi : detected @ 0x3a on adapter ST40 (PIO based) :
<4> The address of the second client is : (0x3a)
<4>
hdmi : detected @ 0x50 on adapter ST40 (PIO based) :
<4> The address of the first client is : (0x50)
<4>
stpio_init
<4>VFD_Driver Init
<4>VFD_Controller Type : NEW Kathrein VFD
<4>CIMAX DeviceInit
<4>SysConf device Init
<4> DVB-PVR Button Device Driver(by Marusys Co.)
<4>
<4>VFD_Driver Init
<4>VFD PIO Already Opened
<4>VFD PIO Already Opened
<4>VFD PIO Already Opened
<4>VFD_Controller Type : NEW Kathrein VFD
<4>VFD_Driver Init
<4>VFD PIO Already Opened
<4>VFD PIO Already Opened
<4>VFD PIO Already Opened
<4>VFD_Controller Type : NEW Kathrein VFD
<6>stapigat_open: major=254 minor=0
<4>STAPIGAT remapping successfull ...
<4>Region (stapigat) busy at b9001000 lg 1000
<4>STAPIGAT remapping successfull ...
<4>STAPIGAT remapping successfull ...
<4>STAPIGAT remapping successfull ...
<4>STAPIGAT remapping successfull ...
<4>STAPIGAT remapping successfull ...
<4>STAPIGAT remapping successfull ...
<4>STAPIGAT remapping successfull ...
<4>STAPIGAT remapping successfull ...
<1>ACCESS 00000002
<1>Open Read/Write
<1>ACCESS 00000002
<1>Open Read/Write
<4>STPIO_GetRevision
<4>STPIO_GetRevision
<1>ACCESS 00000002
<1>Open Read/Write
<1>STMERGE_GETREVISION STMERGE-REL_2.1.1
<1>ACCESS 00000002
<1>Open Read/Write
<4>open sysconf device
<4>SYSCONF_IOCTL
<4>sysconf Cfg0 read value = 0
<4>sysconf cfd write value = 0
<1>pticore: Interrupt task started
<1>pticore: LoaderFunction called
<1>pticore:TC code loaded
<1>ACCESS 00000002
<1>Open Read/Write
<4>Region (STCLKRV_FS) busy at b9000000 lg ff
<4>ClockRecoveryFilterTask Created..
<1>ACCESS 00000002
<1>Open Read/Write
<1>ioctl command [0X00000E00]
<4>STDENC_IOC_INIT
<4>Region (DENC) busy at b920c000 lg 400
<4> Info> STDenc version 12
<4> Info> Device 'DENC' initialised
<1>ioctl command [0X00000E02]
<4>STDENC_IOC_OPEN
<4> Info> Handle opened on device 'DENC'
<1>ioctl command [0X00000E05]
<4>STDENC_IOC_SETENCODINGMODE
<4> Info> STDENC_SetEncodingMode done
<1>ACCESS 00000002
<1>Open Read/Write
<7>STVBI: ioctl command 0 [0x00001200]
<4>STVBI_IOC_INIT
<4> Info> Handle opened on device 'DENC'
<1>ACCESS 00000002
<1>Open Read/Write
<1>ioctl command [0X00000F00]
<4>Region (VTG) busy at b9005000 lg 400
<4>Region (CKGVTG) busy at b9000000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4> Info> Device 'VTG' initialized
<1>ioctl command [0X00000F02]
<4> Info> Handle opened on device 'VTG'
<1>ioctl command [0X00000F05]
<1>ioctl command [0X00000F08]
<1>ioctl command [0X00000F05]
<1>ioctl command [0X00000F08]
<1>ioctl command [0X00000F00]
<4>Region (VTG) busy at b9005034 lg 400
<4>Region (CKGVTG) busy at b9000000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4> Info> Device 'VTG_AUX' initialized
<1>ioctl command [0X00000F02]
<4> Info> Handle opened on device 'VTG_AUX'
<1>ioctl command [0X00000F05]
<1>ioctl command [0X00000F08]
<1>ACCESS 00000002
<1>Open Read/Write
<1>ioctl command [0X00001000]
<4> Info> Handle opened on device 'DENC'
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<1>ioctl command [0X0000100B]
<4> Info> STVOUT_SetInputSource : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00001000]
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT_HD' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00000F06]
<1>ioctl command [0X00001000]
<4>Region (VOUT) busy at b9005800 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005800 lg 400
<4>Region (HDCP) busy at b9005400 lg 400
<4>request pin : port = 2 , Index = 2, Name = PIO2 , BitConfig = 0x4, Int Handler = 0xc01d5ac0
<4> Info> Internal task created.
<4>
<4> Info> STVOUT_Init Device 'VOUT_HDMI' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HDMI' : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> Handle opened on device 'VTG'
<4> Info> Handle closed on device 'VTG'
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00001011]
<4> Info> STVOUT_Start : Done
<4>
<4> Info> STVOUT_RECEIVER_CONNECTED
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<1>ACCESS 00000002
<1>Open Read/Write
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<4> Info> STVOUT_GetDacSelect : Done
<4>
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<4>Region (VMIX) busy at b920ac00 lg 1000
<4> Info> Device 'VMIX' initialised
<4>
<4> Info> Handle opened on device 'VMIX'
<4>
<4> Info> Mixer disabled successfully
<4>
<4> Info> Time base set successfully
<4>
<1>ioctl command [0X00000F08]
<4> Info> Screen params set successfully
<4>
<4> Info> Mixer enabled successfully
<4>
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<4> Info> STVOUT_GetDacSelect : Done
<4>
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<4>Region (VMIX) busy at b920ad00 lg 1000
<4> Info> Device 'VMIX_AUX' initialised
<4>
<4> Info> Handle opened on device 'VMIX_AUX'
<4>
<4> Info> Mixer disabled successfully
<4>
<4> Info> Time base set successfully
<4>
<1>ioctl command [0X00000F08]
<4> Info> Screen params set successfully
<4>
<4> Info> Mixer enabled successfully
<4>
<1>ACCESS 00000002
<1>Open Read/Write
<4>Region (VIDEO LAYER) busy at b9002000 lg 1000
<4>Video LAYER virtual io kernel address of phys B9002000 = B9002000
<4>Region (COMPOSITOR LAYER) busy at b920a000 lg c00
<4>STLAYER - VIDEO :Compositor LAYER virtual io kernel address of phys B920A000 = B920A000
<4>HF Buffer:Virt:a7e6ae80 Dev:7e6ae80
<4>HF2 Buffer:Virt:a7e6ad00 Dev:7e6ad00
<4>VF Buffer:Virt:a7e6ac00 Dev:7e6ac00
<4>VF2 Buffer:Virt:a7e6ab00 Dev:7e6ab00
<4>HF Buffer:Virt:a7e6a980 Dev:7e6a980
<4>HF2 Buffer:Virt:a7e6a800 Dev:7e6a800
<4>VF Buffer:Virt:a7e6a700 Dev:7e6a700
<4>VF2 Buffer:Virt:a7e6a600 Dev:7e6a600
<4>Region (VIDEO LAYER) busy at b9003000 lg 1000
<4>Video LAYER virtual io kernel address of phys B9003000 = B9003000
<4>Region (COMPOSITOR LAYER) busy at b920a000 lg c00
<4>STLAYER - VIDEO :Compositor LAYER virtual io kernel address of phys B920A000 = B920A000
<4>HF Buffer:Virt:a7e6a480 Dev:7e6a480
<4>HF2 Buffer:Virt:a7e6a300 Dev:7e6a300
<4>VF Buffer:Virt:a7e6a200 Dev:7e6a200
<4>VF2 Buffer:Virt:a7e6a100 Dev:7e6a100
<4>HF Buffer:Virt:a7e69f80 Dev:7e69f80
<4>HF2 Buffer:Virt:a7e69e00 Dev:7e69e00
<4>VF Buffer:Virt:a7e69d00 Dev:7e69d00
<4>VF2 Buffer:Virt:a7e69c00 Dev:7e69c00
<4>Region (LAYER) busy at b920a000 lg 1000
<4>LAYER virtual io kernel address of phys 0xb920a100 = 0xb920a000
<4> Info> STLAYER - GFX : Create task GDP-BKL-CUR
<4>
<4> Info> STLAYER - GFX : Layer init OK
<4>
<4> Info> STLAYER - GFX : Layer open OK
<4>
<4>Region (LAYER) busy at b920a000 lg 1000
<4>LAYER virtual io kernel address of phys 0xb920a200 = 0xb920a000
<4> Info> STLAYER - GFX : Create task GDP-BKL-CUR
<4>
<4> Info> STLAYER - GFX : Layer init OK
<4>
<4> Info> STLAYER - GFX : Layer open OK
<4>
<4> Info> STLAYER - GFX : Layer open OK
<4>
<4> Info> STLAYER - GFX : Synchro Vsync is OK
<4>
<4> Info> Layers connected successfully
<4>
<4> Info> Layers connected successfully
<4>
<1>ACCESS 00000002
<1>Open Read/Write
<1>STVIDTEST: ioctl command 0 [0x00007e00]
<1>ACCESS 00000002
<1>Open Read/Write
<1>STVID: ioctl command 2 [0x00003f02]
<4> Info> Injection task created.
<4>VID virtual io kernel address of phys 0xb9214000 = 0xb9214000
<4> Info> Bit buffer allocated at address 0x7987900
<4> Info> Transformer(preprocessor) initialized, handle -2063553440
<7>Remote Transformer
<4>Init Transformer Failed...
<4> Info> Transformer(decoder) initialized, handle 1082130432
<4>Region (VID DISP) busy at b9002000 lg 1000
<4>VID DISP io kernel address of phys 0xb9002000 = 0xb9002000 (HAL 0)
<4>!!!! viddisp_DisplayTaskFunc Started !!!
<4>!!!! viddisp_DisplayTaskFunc Started !!!
<4> Info> Speed task created.
<4> Info> Error recovery task created.
<4> Info> Device 'VID' initialised
<1>STVID: ioctl command 3 [0x00003f03]
<4> Info> Synchronization delay set to 0.
<4> Info> Video handle opened on device 'VID'
<1>STVID: ioctl command 47 [0x00003f2f]
<1>STVID: ioctl command 47 [0x00003f2f]
<1>STVID: ioctl command 58 [0x00003f3a]
<1>STVID: ioctl command 61 [0x00003f3d]
<4>Setup: Partition has handle:c01817ec
<1>STVID: ioctl command 61 [0x00003f3d]
<4>Setup: Partition has handle:c01817ec
<1>STVID: ioctl command 61 [0x00003f3d]
<4>Setup: Partition has handle:c01817d8
<1>STVID: ioctl command 22 [0x00003f16]
<1>STVID: ioctl command 22 [0x00003f16]
<4> Info> STAUD_Open : done
<1>ACCESS 00000002
<1>Open Read/Write
<1>ioctl command [0X00001100]
<4> Info> Handle opened on device 'VTG'
<4> Info> STVOUT_Open Device 'VOUT_HDMI' : Done
<4>
<4> Info> STHDMI_Init Device 'HDMI' : Done
<1>ioctl command [0X00001102]
<4> Info> STHDMI_Open Device 'HDMI' : Done
<1>STVID: ioctl command 68 [0x00003f44]
<4> Info> STVID_Start()...
<4> Info> Allocate 6 Frame buffers [1920;1088]
<4> Info> Allocated frame buffer at address 0x13749000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x1344c000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x1314f000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x12e52000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x12b55000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x12858000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated secondary frame buffer at address 0x078c6000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07806000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07746000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07686000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x075c6000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07506000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> vidprod_Start() called
<4> Info> push Producer RESET
<4> Info> STVID_Start() done.
<4>
<4>START ES buffer Base:7987900 - Top:7e69bff
<4>SC buffer Base:6401700 - Top:642e6f0
<4>PES buffer Base:642e700 - Top:6444eff
<4> Info> PROD RESET
<4> Info> BitBuffer Underflow, BBL=0
<7>Remote Transformer
<1>STVID: ioctl command 28 [0x00003f1c]
<1>STVID: ioctl command 51 [0x00003f33]
<4>NewInputWrite_p:0x0642e700
<4>open stpio
<4>Request PIO pin number = 4, port number = 2
<4>Request PIO pin number = 6, port number = 1
<4>Request PIO pin number = 7, port number = 1
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4>VFD_Driver Init
<4>VFD PIO Already Opened
<4>VFD PIO Already Opened
<4>VFD PIO Already Opened
<4>VFD_Controller Type : NEW Kathrein VFD
<1>ACCESS 00000002
<1>Open Read/Write
<4>Region (BLIT) busy at b920b000 lg 1000
<4> Info> Device 'BLITTER' initialised
<4> Info> Handle opened on device 'BLITTER'
<4>Change Partition : 0
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6447900
<4>open cimax device
<4>Change Partition : 0
<4> Info> STLAYER - API : Bad Handle
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa67cb900
<4> Info> STLAYER - GFX : Viewport request
<4>
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6bc0100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6c8a900
<4> Info> STLAYER - GFX : Viewport request
<4>
<4> Info> Layers disconnected successfully
<4>
<4> Info> Handle closed on device 'VMIX_AUX'
<4>
<4>Trying to free nonexistent resource <b920ad00-b920bcff>
<4>The I/O memory region 0xb920ad00 is released successfully
<4> Info> Device 'VMIX_AUX' terminated
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001001]
<4> Info> Handle closed on device 'DENC'
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>STLINUX_UnmapRegion(): 0xb9005000 Non existing region...
<4>STLINUX_UnmapRegion(): 0xa009a02f Non existing region...
<4> Info> STVOUT_Term Device 'VOUT' : Done
<4>
<1>ioctl command [0X00000F03]
<4> Info> Handle closed on device 'VTG_AUX'
<1>ioctl command [0X00000F01]
<4>STLINUX_UnmapRegion(): 0xb9005034 Non existing region...
<4>The I/O memory region 0xb9000000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4> Info> Device 'VTG_AUX' terminated
<1>ioctl command [0X00000F00]
<4>Region (SYSCFG) busy at b9001000 lg 400
<4> Info> Device 'VTG_AUX' initialized
<1>ioctl command [0X00000F02]
<4> Info> Handle opened on device 'VTG_AUX'
<1>ioctl command [0X00000F05]
<1>ioctl command [0X00000F08]
<1>ioctl command [0X00001000]
<4> Info> Handle opened on device 'DENC'
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<1>ioctl command [0X0000100B]
<4> Info> STVOUT_SetInputSource : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<4> Info> STVOUT_GetDacSelect : Done
<4>
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<4>Region (VMIX) busy at b920ad00 lg 1000
<4> Info> Device 'VMIX_AUX' initialised
<4>
<4> Info> Handle opened on device 'VMIX_AUX'
<4>
<4> Info> Mixer disabled successfully
<4>
<4> Info> Time base set successfully
<4>
<1>ioctl command [0X00000F08]
<4> Info> Screen params set successfully
<4>
<4> Info> Mixer enabled successfully
<4>
<4> Info> STLAYER - GFX : Layer open OK
<4>
<4> Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
<4> Error> ChangeViewportParams() failed. Error = 0x150005 !
<4> Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
<4> Error> ChangeViewportParams() failed. Error = 0x150005 !
<4> Info> STLAYER - GFX : Synchro Vsync is OK
<4>
<4> Info> Layers connected successfully
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d55100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d56100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d57e00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d5b200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d5b700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d5c000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d5c500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d5e200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d5e700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d60400
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d60900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d61000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d61700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d61e00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d62500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d62900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d62d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d63100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d63500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d64700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d65900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d66b00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d69300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d6a200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d6bf00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d6e700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d6f000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d6ff00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d70000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d70100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d71300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d71800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d74c00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d75e00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d76300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d77500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d77a00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d78c00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d79100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d79300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d79500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d79700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d79900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d7ab00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d7bd00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d7c500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d7d400
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d7da00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d7e900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d7f800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d7fe00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d80d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d81c00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d82200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d83100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d84000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d84600
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d85500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d85e00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d86700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d86e00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d87200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d87900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d87d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d88400
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d88800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d88f00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d89300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d8ac00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d8c500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d8d700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d8e900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d8fb00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d90d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d91f00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d93100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d93a00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d95500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d96500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d96e00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d97700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d98000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d98b00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d99600
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d9a100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d9d800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d9dd00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6d9df00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da3300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da3500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da4200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da4f00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da5c00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da6900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da7600
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da8300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6da9000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6daa800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dab500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dac500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dad500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dae500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6daf500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db2100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db3100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db4100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db5100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db5c00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db6700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db7200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db7d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db8800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6db9300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dba200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dbb100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dbbc00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dbc700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dbd200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dbdd00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dbec00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dbfb00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc0a00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc1d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc2500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc2e00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc3700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc4500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc5300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc6100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc7400
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc8200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc9000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dc9f00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dca800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dcb700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dcc600
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dcd800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dcea00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dcfc00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd0700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd1200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd1d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd2c00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd3700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd4200
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd4d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd5c00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd6b00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd7a00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd8900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dd9800
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dda700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6ddb600
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6ddc500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6ddd400
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6dde300
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6ddfa00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de0700
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de0b00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de1600
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de1b00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de1f00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de2a00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de4000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de4600
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de4e00
<1>STVID: ioctl command 56 [0x00003f38]
<1>STVID: ioctl command 25 [0x00003f19]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 57 [0x00003f39]
<1>STVID: ioctl command 57 [0x00003f39]
<4> Info> STLAYER - GFX : Layer close OK
<4>
<4> Info> Layers disconnected successfully
<4>
<4> Info> Handle closed on device 'VMIX'
<4>
<4>Trying to free nonexistent resource <b920ac00-b920bbff>
<4>The I/O memory region 0xb920ac00 is released successfully
<4> Info> Device 'VMIX' terminated
<4>
<1>ioctl command [0X00001103]
<4> Info> STHDMI_Close Device 'HDMI' : Done
<1>ioctl command [0X00001101]
<4> Info> STVOUT_Close Device 'VOUT_HDMI' : Done
<4>
<4> Info> Handle closed on device 'VTG'
<4> Info> STHDMI_Term Device 'HDMI' : Done
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT_HDMI' : Done
<4>
<1>ioctl command [0X00001001]
<4>STLINUX_UnmapRegion(): 0xb9005800 Non existing region...
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>STLINUX_UnmapRegion(): 0xb9005800 Non existing region...
<4>Trying to free nonexistent resource <b9005400-b90057ff>
<4>The I/O memory region 0xb9005400 is released successfully
<4> Info> STVOUT_Term Device 'VOUT_HDMI' : Done
<4>
<4> Info> STLAYER - GFX : Viewport release
<4>
<4> Info> STLAYER - GFX : Layer close OK
<4>
<4>Trying to free nonexistent resource <b920a000-b9209fff>
<4>The I/O memory region 0xb920a000 is released successfully
<4> Info> STLAYER - GFX : Layer term OK
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001001]
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>STLINUX_UnmapRegion(): 0xb1341723 Non existing region...
<4> Info> STVOUT_Term Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001001]
<4> Info> Handle closed on device 'DENC'
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xa009a02f is released successfully
<4> Info> STVOUT_Term Device 'VOUT' : Done
<4>
<1>ioctl command [0X00000F03]
<4> Info> Handle closed on device 'VTG'
<1>ioctl command [0X00000F01]
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xb9000000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4> Info> Device 'VTG' terminated
<1>ioctl command [0X00000F00]
<4>Region (VTG) busy at b9005000 lg 400
<4>Region (SYSCFG) busy at b9001000 lg 400
<4> Info> Device 'VTG' initialized
<1>ioctl command [0X00000F02]
<4> Info> Handle opened on device 'VTG'
<1>ioctl command [0X00000F05]
<1>ioctl command [0X00000F08]
<1>ioctl command [0X00000F05]
<1>ioctl command [0X00000F08]
<4>Region (LAYER) busy at b920a000 lg 1000
<4>LAYER virtual io kernel address of phys 0xb920a100 = 0xb920a000
<4> Info> STLAYER - GFX : Create task GDP-BKL-CUR
<4>
<4> Info> STLAYER - GFX : Layer init OK
<4>
<4> Info> STLAYER - GFX : Layer open OK
<4>
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa67cb900
<4> Info> STLAYER - API : Bad Handle
<4> Info> STLAYER - GFX : Viewport request
<4>
<1>ACCESS 00000002
<1>Open Read/Write
<1>ioctl command [0X00001000]
<4> Info> Handle opened on device 'DENC'
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<1>ioctl command [0X0000100B]
<4> Info> STVOUT_SetInputSource : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00001000]
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT_HD' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00000F06]
<1>ioctl command [0X00001000]
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005800 lg 400
<4>Region (HDCP) busy at b9005400 lg 400
<4>request pin : port = 2 , Index = 2, Name = PIO2 , BitConfig = 0x4, Int Handler = 0xc01d5ac0
<4> Info> Internal task created.
<4>
<4> Info> STVOUT_Init Device 'VOUT_HDMI' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HDMI' : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> Handle opened on device 'VTG'
<4> Info> Handle closed on device 'VTG'
<4> Info> STVOUT_Enable : Done
<4>
<1>ACCESS 00000002
<1>Open Read/Write
<1>ioctl command [0X00001100]
<4> Info> Handle opened on device 'VTG'
<4> Info> STVOUT_Open Device 'VOUT_HDMI' : Done
<4>
<4> Info> STHDMI_Init Device 'HDMI' : Done
<1>ioctl command [0X00001102]
<4> Info> STHDMI_Open Device 'HDMI' : Done
<1>ioctl command [0X00001011]
<4> Info> STVOUT_Start : Done
<4>
<4> Info> STVOUT_RECEIVER_CONNECTED
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<1>ioctl command [0X0000110C]
<4>STVOUT_GetTargetInformation 1948
<4>HDMI_GetSinkInformation 1132
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<4> Info> STVOUT_GetDacSelect : Done
<4>
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<4>Region (VMIX) busy at b920ac00 lg 1000
<4> Info> Device 'VMIX' initialised
<4>
<4> Info> Handle opened on device 'VMIX'
<4>
<4>HDMI_GetSinkInformation 1157
<4> Info> Mixer disabled successfully
<4>
<4> Info> Time base set successfully
<4>
<1>ioctl command [0X00000F08]
<4> Info> Screen params set successfully
<4>
<4> Info> Mixer enabled successfully
<4>
<4> Info> STLAYER - GFX : Layer open OK
<4>
<4> Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
<4> Error> ChangeViewportParams() failed. Error = 0x150005 !
<4> Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
<4> Error> ChangeViewportParams() failed. Error = 0x150005 !
<4> Info> STLAYER - GFX : Synchro Vsync is OK
<4>
<4> Info> Layers connected successfully
<4>
<1>ioctl command [0X00001107]
<4>HDMI_GetSinkInformation 1162
<4> 0x 0 0xff 0xff 0xff 0xff 0xff 0xff 0x 0 0x52 0x62 0x 3 0x 1 0x 0 0x 0 0x 0 0x 0 0x 0 0x10 0x 1 0x 3 0x80 0xc4 0x8e 0x 0 0x e 0xee 0x91 0xa3 0x54 0x4c 0x99 0x26
<4> 0x f 0x50 0x54 0x 0 0x 0 0x 0 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x 1 0x1d 0x80 0xd0 0x72 0x1c 0x16 0x20 0x10 0x2c
<4> 0x25 0x80 0xc4 0x8e 0x21 0x 0 0x 0 0x9e 0x8c 0x a 0xd0 0x90 0x20 0x40 0x31 0x20 0x c 0x40 0x55 0x 0 0xc4 0x8e 0x21 0x 0 0x 0 0x18 0x 0 0x 0 0x 0 0xfc 0x 0 0x54
<4> 0x4f 0x53 0x48 0x49 0x42 0x41 0x2d 0x54 0x56 0x a 0x20 0x20 0x 0 0x 0 0x 0 0xfd 0x 0 0x31 0x3d 0x f 0x2e 0x 8 0x 0 0x a 0x20 0x20 0x20 0x20 0x20 0x20 0x 1 0x7d
<4> 0x 2 0x 3 0x1c 0x77 0x4d 0x94 0x13 0x12 0x16 0x11 0x15 0x 5 0x 4 0x 3 0x 7 0x 2 0x 6 0x 1 0x23 0x 9 0x 7 0x 7 0x65 0x 3 0x c 0x 0 0x10 0x 0 0x 1 0x1d 0x 0 0xbc
<4> 0x52 0xd0 0x1e 0x20 0xb8 0x28 0x55 0x40 0xc4 0x8e 0x21 0x 0 0x 0 0x1e 0x8c 0x a 0xd0 0x90 0x20 0x40 0x31 0x20 0x c 0x40 0x55 0x 0 0x13 0x8e 0x21 0x 0 0x 0 0x18
<4> 0x 1 0x1d 0x80 0x18 0x71 0x1c 0x16 0x20 0x58 0x2c 0x25 0x 0 0xc4 0x8e 0x21 0x 0 0x 0 0x9e 0x8c 0x a 0xd0 0x8a 0x20 0xe0 0x2d 0x10 0x10 0x3e 0x96 0x 0 0xc4 0x8e
<4> 0x21 0x 0 0x 0 0x18 0x8c 0x a 0xd0 0x8a 0x20 0xe0 0x2d 0x10 0x10 0x3e 0x96 0x 0 0x13 0x8e 0x21 0x 0 0x 0 0x18 0x 0 0x 0 0x 0 0x 0 0x 0 0x 0 0x 0 0x 0 0x 0 0x30
<4>
<4> Info> STVOUT_GetTargetInformation : Done
<4>
<4>sthdmi_FillSinkEDID : IDManufactureName After is : TSB
<4>
sthdmi_FillSinkEDID : IDSerialNumber is : 0
<4>
sthdmi_FillSinkEDID : WeekOfManufacture is : 16
<4>
sthdmi_FillSinkEDID : YearOfManufacture is : 2006
<4>
sthdmi_FillSinkEDID -> VideoInput : SignalLevelMax is : 0
<4>
sthdmi_FillSinkEDID -> VideoInput : SignalLevelMin is : 0
<4>
Info> STHDMI_FillSinkEDID : Done
<4> Info> STVOUT_SendData : Done
<4>
<4> Info> STHDMI_FillAVIInfoFrame : Done
<1>ioctl command [0X00001109]
<4> Info> STVOUT_SendData : Done
<4>
<4> Info> STHDMI_FillAudioInfoFrame : Done
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001001]
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xb1341723 is released successfully
<4> Info> STVOUT_Term Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001001]
<4> Info> Handle closed on device 'DENC'
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xa009a02f is released successfully
<4> Info> STVOUT_Term Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001000]
<4> Info> Handle opened on device 'DENC'
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<1>ioctl command [0X0000100B]
<4> Info> STVOUT_SetInputSource : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00001000]
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT_HD' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00000F06]
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001001]
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xb1341723 is released successfully
<4> Info> STVOUT_Term Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001001]
<4> Info> Handle closed on device 'DENC'
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xa009a02f is released successfully
<4> Info> STVOUT_Term Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001000]
<4> Info> Handle opened on device 'DENC'
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<1>ioctl command [0X0000100B]
<4> Info> STVOUT_SetInputSource : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00001000]
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT_HD' (Denc version 0) : Done
<4>
<1>ioctl command [0X0000110F]
<4> Info> STHDMI_FreeEDIDMemory : Done
<1>ioctl command [0X00001008]
<4> Info> STVOUT_GetOutputParams : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Error> STVOUT_Enable : failed, error 0x920003
<4>
<1>ioctl command [0X0000110E]
<4> Info> STHDMI_SetOutputWindows : Done
<1>ioctl command [0X00001107]
<4> Info> STVOUT_SendData : Done
<4>
<4> Info> STHDMI_FillAVIInfoFrame : Done
<1>ioctl command [0X00001109]
<4> Info> STVOUT_SendData : Done
<4>
<4> Info> STHDMI_FillAudioInfoFrame : Done
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00000F06]
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001001]
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xb1341723 is released successfully
<4> Info> STVOUT_Term Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001001]
<4> Info> Handle closed on device 'DENC'
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xa009a02f is released successfully
<4> Info> STVOUT_Term Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001000]
<4> Info> Handle opened on device 'DENC'
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<1>ioctl command [0X0000100B]
<4> Info> STVOUT_SetInputSource : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00001000]
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT_HD' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00000F06]
<1>STVID: ioctl command 30 [0x00003f1e]
<1>STVID: ioctl command 30 [0x00003f1e]
<1>STVID: ioctl command 53 [0x00003f35]
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001001]
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xb1341723 is released successfully
<4> Info> STVOUT_Term Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001001]
<4> Info> Handle closed on device 'DENC'
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xa009a02f is released successfully
<4> Info> STVOUT_Term Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001000]
<4> Info> Handle opened on device 'DENC'
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<1>ioctl command [0X0000100B]
<4> Info> STVOUT_SetInputSource : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00001000]
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT_HD' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00000F06]
<1>STVID: ioctl command 56 [0x00003f38]
<1>STVID: ioctl command 25 [0x00003f19]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 57 [0x00003f39]
<1>STVID: ioctl command 57 [0x00003f39]
<4> Info> STLAYER - GFX : Layer close OK
<4>
<4> Info> Layers disconnected successfully
<4>
<4> Info> Handle closed on device 'VMIX'
<4>
<4>Trying to free nonexistent resource <b920ac00-b920bbff>
<4>The I/O memory region 0xb920ac00 is released successfully
<4> Info> Device 'VMIX' terminated
<4>
<1>ioctl command [0X00001103]
<4> Info> STHDMI_Close Device 'HDMI' : Done
<1>ioctl command [0X00001101]
<4> Info> STVOUT_Close Device 'VOUT_HDMI' : Done
<4>
<4> Info> Handle closed on device 'VTG'
<4> Info> STHDMI_Term Device 'HDMI' : Done
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT_HDMI' : Done
<4>
<1>ioctl command [0X00001001]
<4>The I/O memory region 0xb9005800 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>STLINUX_UnmapRegion(): 0xb9005800 Non existing region...
<4>Trying to free nonexistent resource <b9005400-b90057ff>
<4>The I/O memory region 0xb9005400 is released successfully
<4> Info> STVOUT_Term Device 'VOUT_HDMI' : Done
<4>
<4> Info> STLAYER - GFX : Viewport release
<4>
<4> Info> STLAYER - GFX : Layer close OK
<4>
<4>Trying to free nonexistent resource <b920a000-b9209fff>
<4>The I/O memory region 0xb920a000 is released successfully
<4> Info> STLAYER - GFX : Layer term OK
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001001]
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xb1341723 is released successfully
<4> Info> STVOUT_Term Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001005]
<4> Info> STVOUT_Disable : Done
<4>
<1>ioctl command [0X00001003]
<4> Info> STVOUT_Close Device 'VOUT' : Done
<4>
<1>ioctl command [0X00001001]
<4> Info> Handle closed on device 'DENC'
<4>Trying to free nonexistent resource <b9005000-b9005fff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xa009a02f is released successfully
<4> Info> STVOUT_Term Device 'VOUT' : Done
<4>
<1>ioctl command [0X00000F03]
<4> Info> Handle closed on device 'VTG'
<1>ioctl command [0X00000F01]
<4>Trying to free nonexistent resource <b9005000-b90053ff>
<4>The I/O memory region 0xb9005000 is released successfully
<4>The I/O memory region 0xb9000000 is released successfully
<4>Trying to free nonexistent resource <b9001000-b90013ff>
<4>The I/O memory region 0xb9001000 is released successfully
<4> Info> Device 'VTG' terminated
<1>ioctl command [0X00000F00]
<4>Region (VTG) busy at b9005000 lg 400
<4>Region (SYSCFG) busy at b9001000 lg 400
<4> Info> Device 'VTG' initialized
<1>ioctl command [0X00000F02]
<4> Info> Handle opened on device 'VTG'
<1>ioctl command [0X00000F05]
<1>ioctl command [0X00000F08]
<1>ioctl command [0X00000F05]
<1>ioctl command [0X00000F08]
<4>Region (LAYER) busy at b920a000 lg 1000
<4>LAYER virtual io kernel address of phys 0xb920a100 = 0xb920a000
<4> Info> STLAYER - GFX : Create task GDP-BKL-CUR
<4>
<4> Info> STLAYER - GFX : Layer init OK
<4>
<4> Info> STLAYER - GFX : Layer open OK
<4>
<4> Info> STLAYER - API : Bad Handle
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa67cb900
<4> Info> STLAYER - GFX : Viewport request
<4>
<1>ACCESS 00000002
<1>Open Read/Write
<1>ioctl command [0X00001000]
<4> Info> Handle opened on device 'DENC'
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT' : Done
<4>
<1>ioctl command [0X0000100B]
<4> Info> STVOUT_SetInputSource : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00001000]
<4>Region (VOUT) busy at b9005000 lg 1000
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005000 lg 400
<4> Info> STVOUT_Init Device 'VOUT_HD' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> STVOUT_Enable : Done
<4>
<1>ioctl command [0X00000F06]
<1>ioctl command [0X00001000]
<4>Region (SYSCFG) busy at b9001000 lg 400
<4>Region (HDMI) busy at b9005800 lg 400
<4>Region (HDCP) busy at b9005400 lg 400
<4>request pin : port = 2 , Index = 2, Name = PIO2 , BitConfig = 0x4, Int Handler = 0xc01d5ac0
<4> Info> Internal task created.
<4>
<4> Info> STVOUT_Init Device 'VOUT_HDMI' (Denc version 0) : Done
<4>
<1>ioctl command [0X00001002]
<4> Info> STVOUT_Open Device 'VOUT_HDMI' : Done
<4>
<1>ioctl command [0X00001006]
<4> Info> Handle opened on device 'VTG'
<4> Info> Handle closed on device 'VTG'
<4> Info> STVOUT_Enable : Done
<4>
<1>ACCESS 00000002
<1>Open Read/Write
<1>ioctl command [0X00001100]
<4> Info> Handle opened on device 'VTG'
<4> Info> STVOUT_Open Device 'VOUT_HDMI' : Done
<4>
<4> Info> STHDMI_Init Device 'HDMI' : Done
<1>ioctl command [0X00001102]
<4> Info> STHDMI_Open Device 'HDMI' : Done
<1>ioctl command [0X00001011]
<4> Info> STVOUT_Start : Done
<4>
<4> Info> STVOUT_RECEIVER_CONNECTED
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<1>ioctl command [0X00001008]
<4> Info> STVOUT_GetOutputParams : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<4> Info> STVOUT_Open Device 'VOUT_HD' : Done
<4>
<4> Info> STVOUT_GetDacSelect : Done
<4>
<4> Info> STVOUT_Close Device 'VOUT_HD' : Done
<4>
<4>Region (VMIX) busy at b920ac00 lg 1000
<4> Info> Device 'VMIX' initialised
<4>
<4> Info> Handle opened on device 'VMIX'
<4>
<4> Info> Mixer disabled successfully
<4>
<4> Info> Time base set successfully
<4>
<1>ioctl command [0X00000F08]
<4> Info> Screen params set successfully
<4>
<4> Info> Mixer enabled successfully
<4>
<4> Info> STLAYER - GFX : Layer open OK
<4>
<4> Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
<4> Error> ChangeViewportParams() failed. Error = 0x150005 !
<4> Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
<4> Error> ChangeViewportParams() failed. Error = 0x150005 !
<4> Info> STLAYER - GFX : Synchro Vsync is OK
<4>
<4> Info> Layers connected successfully
<4>
<1>ioctl command [0X00001107]
<4> Info> STVOUT_SendData : Done
<4>
<4> Info> STHDMI_FillAVIInfoFrame : Done
<1>ioctl command [0X00001109]
<4> Info> STVOUT_SendData : Done
<4>
<4> Info> STHDMI_FillAudioInfoFrame : Done
<4> Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
<4> Error> ChangeViewportParams() failed. Error = 0x150005 !
<4> Info> Screen params set successfully
<4>
<1>STVID: ioctl command 56 [0x00003f38]
<1>STVID: ioctl command 25 [0x00003f19]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 57 [0x00003f39]
<1>STVID: ioctl command 57 [0x00003f39]
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de6000
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6de6100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6deb100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6deb500
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6deb900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6debd00
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa6d55100
<4>already open
<4>Request PIO pin number = 7, port number = 1
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<1>STVID: ioctl command 17 [0x00003f11]
<4> Info> Synchronization disabled.
<1>STVID: ioctl command 71 [0x00003f47]
<4> Info> STVID_Stop()...
<4> Info> vidprod_Stop() called
<4> Info> DoStopNow called
<4> Info> DeAllocating primary frame buffer from address 0x12b55000
<4> Info> DeAllocating primary frame buffer from address 0x12e52000
<4> Info> DeAllocating primary frame buffer from address 0x1314f000
<4> Info> DeAllocating primary frame buffer from address 0x1344c000
<4> Info> DeAllocating primary frame buffer from address 0x13749000
<4> Info> DeAllocating primary frame buffer from address 0x12858000
<4> Info> DeAllocating decimated frame buffer from address 0x075c6000
<4> Info> DeAllocating decimated frame buffer from address 0x07686000
<4> Info> DeAllocating decimated frame buffer from address 0x07746000
<4> Info> DeAllocating decimated frame buffer from address 0x07806000
<4> Info> DeAllocating decimated frame buffer from address 0x078c6000
<4> Info> DeAllocating decimated frame buffer from address 0x07506000
<4> Info> STVID_Stop() done.
<1>STVID: ioctl command 12 [0x00003f0c]
<4>NewInputWrite_p:0x0642e700
<1>STVID: ioctl command 8 [0x00003f08]
<1>STVID: ioctl command 11 [0x00003f0b]
<1>STVID: ioctl command 16 [0x00003f10]
<1>STVID: ioctl command 16 [0x00003f10]
<1>STVID: ioctl command 9 [0x00003f09]
<1>STVID: ioctl command 9 [0x00003f09]
<1>STVID: ioctl command 4 [0x00003f04]
<4> Info> Video handle closed on device 'VID'
<1>STVID: ioctl command 5 [0x00003f05]
<4>The I/O memory region 0xb9002000 is released successfully
<4> Error> PreprocJobCompletion signaled but no corresponding context found
<4>
<4> Info> Bit buffer de-allocated from address 0x7987900
<4>The I/O memory region 0xb9214000 is released successfully
<4> Info> Injection task deleted.
<4> Info> Device 'VID' terminated
<1>STVIDTEST: ioctl command 0 [0x00007e00]
<1>ACCESS 00000002
<1>Open Read/Write
<1>STVID: ioctl command 2 [0x00003f02]
<4> Info> Injection task created.
<4>VID virtual io kernel address of phys 0xb9240000 = 0xb9240000
<4>Region (CD FIFO) busy at b9240000 lg 1000
<4>VID compressed virtual io kernel address of phys 0xb9240000 = 0xb9240000
<4> Info> Bit buffer allocated at address 0x7bde900
<4>ES buffer Base:0x07bde900 - Top:0x07de08ff
<4>SC buffer Base:0x07de0900 - Top:0x07e0bbd0
<4>PES buffer Base:0x07e0bc00 - Top:0x07e69bff
<4> Info> Bit buffer set at address 0x7bde900.
<4> Info> Decode task created.
<4>VID DISP io kernel address of phys 0xb9002000 = 0xb9002000 (HAL 0)
<4>!!!! viddisp_DisplayTaskFunc Started !!!
<4>!!!! viddisp_DisplayTaskFunc Started !!!
<4> Info> TrickMode task created.
<4> Info> Error recovery task created.
<4> Info> Device 'VID' initialised
<1>STVID: ioctl command 3 [0x00003f03]
<4> Info> Synchronization delay set to 0.
<4> Info> Video handle opened on device 'VID'
<1>STVID: ioctl command 47 [0x00003f2f]
<1>STVID: ioctl command 47 [0x00003f2f]
<1>STVID: ioctl command 58 [0x00003f3a]
<1>STVID: ioctl command 61 [0x00003f3d]
<4>Setup: Partition has handle:c01817ec
<1>STVID: ioctl command 61 [0x00003f3d]
<4>Setup: Partition has handle:c01817d8
<1>STVID: ioctl command 22 [0x00003f16]
<1>STVID: ioctl command 22 [0x00003f16]
<1>STVID: ioctl command 28 [0x00003f1c]
<1>STVID: ioctl command 51 [0x00003f33]
<4>NewInputWrite_p:0x07e0bc00
<1>STVID: ioctl command 68 [0x00003f44]
<4> Info> STVID_Start()...
<4> Info> Allocate 6 Frame buffers [1920;1088]
<4> Info> Allocated frame buffer at address 0x13d03000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x13a06000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x13709000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x1340c000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x1310f000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x12e12000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated secondary frame buffer at address 0x07b1e000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07a5e000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x0799e000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x078c6000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07806000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07746000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> STVID_Start() done.
<4> Info> Controller has been reset.
<1>STVID: ioctl command 30 [0x00003f1e]
<1>STVID: ioctl command 30 [0x00003f1e]
<1>STVID: ioctl command 53 [0x00003f35]
<1>ioctl command [0X00001008]
<4> Info> STVOUT_GetOutputParams : Done
<4>
<1>ioctl command [0X00001007]
<4> Info> STVOUT_SetOutputParams : Done
<4>
<7>Remote Transformer
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<1>STVID: ioctl command 23 [0x00003f17]
<4> Info> Synchronization enabled.
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6403400
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6404400
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6404d00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6406100
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6406a00
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6407900
<4>STLAYER_IOC_ALLOCDATA
<4> Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6408800
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa6403400
<1>STVID: ioctl command 56 [0x00003f38]
<1>STVID: ioctl command 25 [0x00003f19]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 57 [0x00003f39]
<1>STVID: ioctl command 57 [0x00003f39]
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4>already open
<4>Request PIO pin number = 7, port number = 1
<4> Info> Detected decode error !
<4> Info> Detected decode error !
<4> Info> Detected decode error !
<4> Info> Detected decode error !
<4> Error> Error recovery detected error: automatic stop()/start() !
<4> Info> Decoder stopped.
<4> Info> DeAllocating primary frame buffer from address 0x1310f000
<4> Info> DeAllocating primary frame buffer from address 0x1340c000
<4> Info> DeAllocating primary frame buffer from address 0x13709000
<4> Info> DeAllocating primary frame buffer from address 0x13a06000
<4> Info> DeAllocating primary frame buffer from address 0x12e12000
<4> Info> DeAllocating decimated frame buffer from address 0x07806000
<4> Info> DeAllocating decimated frame buffer from address 0x078c6000
<4> Info> DeAllocating decimated frame buffer from address 0x0799e000
<4> Info> DeAllocating decimated frame buffer from address 0x07a5e000
<4> Info> DeAllocating decimated frame buffer from address 0x07746000
<4> Info> STVID_Start()...
<4> Info> Allocate 5 Frame buffers [1920;1088]
<4> Info> Allocated frame buffer at address 0x13a06000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x13709000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x1340c000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x1310f000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x12e12000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated secondary frame buffer at address 0x07a5e000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x0799e000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x078c6000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07806000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07746000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Controller has been reset.
<4> Info> STVID_Start() done.
<1>STVID: ioctl command 17 [0x00003f11]
<4> Info> Synchronization disabled.
<1>STVID: ioctl command 71 [0x00003f47]
<4> Info> STVID_Stop()...
<4> Info> Decoder stopped.
<4> Info> DeAllocating primary frame buffer from address 0x12e12000
<4> Info> DeAllocating primary frame buffer from address 0x1310f000
<4> Info> DeAllocating primary frame buffer from address 0x1340c000
<4> Info> DeAllocating primary frame buffer from address 0x13709000
<4> Info> DeAllocating primary frame buffer from address 0x13a06000
<4> Info> DeAllocating decimated frame buffer from address 0x07746000
<4> Info> DeAllocating decimated frame buffer from address 0x07806000
<4> Info> DeAllocating decimated frame buffer from address 0x078c6000
<4> Info> DeAllocating decimated frame buffer from address 0x0799e000
<4> Info> DeAllocating decimated frame buffer from address 0x07a5e000
<4> Info> STVID_Stop() done.
<1>STVID: ioctl command 68 [0x00003f44]
<4> Info> STVID_Start()...
<4> Info> Allocate 5 Frame buffers [1920;1088]
<4> Info> Allocated frame buffer at address 0x13a06000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x13709000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x1340c000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x1310f000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated frame buffer at address 0x12e12000
<4> Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
<4> Info> Allocated secondary frame buffer at address 0x07a5e000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x0799e000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x078c6000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07806000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> Allocated secondary frame buffer at address 0x07746000
<4> Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
<4> Info> STVID_Start() done.
<4> Info> Controller has been reset.
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<1>STVID: ioctl command 23 [0x00003f17]
<4> Info> Synchronization enabled.
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<1>STVID: ioctl command 56 [0x00003f38]
<1>STVID: ioctl command 25 [0x00003f19]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 59 [0x00003f3b]
<1>STVID: ioctl command 57 [0x00003f39]
<1>STVID: ioctl command 57 [0x00003f39]
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa6408800
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa6407900
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa6406a00
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa6406100
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa6404d00
<7>STLAYER_IOC_FreeData
<4> Info> STAVMEM_FreeBuffer() : Address to free 0xa6404400
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>
<4> Info> STVOUT_NO_ENCRYPTION
<4>