<gj> i'm about to paste some things
<gj> turn off your floodprots
<gj> help
<gj> command list:
<gj> help this list
<gj> script run script at specific address
<gj> go jump directly to address
<gj> bootx boot a kernel cache at specified address
<gj> diags boot into diagnos
<gj> tsys boot into tsys (if present)
<gj> bdev block device commands
<gj> image flash image inspection
<gj> fs file system commands
<gj> fsboot try to boot kernel at /kernelcache
<gj> devicetree create a device tree from the specified address
<gj> ramdisk create a ramdisk from the specified address
<gj> tftp tftp via ethernet to/from device
<gj> eload tftp via ethernet from hardcoded install server
<gj> halt halt the system (good for JTAG)
<gj> reboot reboot the device
<gj> poweroff power off the device
<gj> md memory display - 32bit
<gj> mdh memory display - 16bit
<gj> mdb memory display - 8bit
<gj> mw memory write - 32bit
<gj> mwh memory write - 16bit
<gj> mwb memory write - 8bit
<gj> mws memory write - string
<gj> crc POSIX 1003.2 checksum of memory
<gj> task examine system tasks
<gj> printenv print one or all environment variables
<gj> setenv set an environment variable
<gj> clearenv clear all environment variables
<gj> saveenv save current environment to flash
<gj> run use contents of environment var as script
<gj> bgcolor set the display background color
<gj> setpicture set the image on the display
<gj> iic iic read/write
<gj> radio Manipulate the radio board.
<gj> setbusclock Set bus clock to the given frequency in Hz.
<gj> setcorevoltage Set core voltage to the given voltage in mV.
<gj> syscfg flash SysCfg inspection
<gj> charge Manage the charger chip.
<gj> powernvram Access Power NVRAM.
<gj> usb run a USB command
<gj> nand nand flash routines
<gj> chunk chunk a file