rendered paste bodyfind testmode cmd
TestModeMgr::CheckeMode : TestMode Enabled
Standby Mgr Launcher~~
mkdir: Cannot create directory `/tmp/etc': File exists
read
length = 28
PARAM : boot_param_version=VFD_Driver Init
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
1
PARAM : board=stb7100ref_27
PARAM : bootdelay=1
PVFD_Controller Type : NEW Kathrein VFD
ARAM : ethaddr= 0:50:fd:ff:4f:40
PARAM : autoload=n
PARAM : bootcmd=bootm a0040000
PARAM : ipaddr=192.168.0.177
PARAM : serverip=192.168.0.161
PARAM : stdin=serial
PARAM : stdout=serial
PARAM : stderr=serial
PARAM : bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000
BOOT PARAM VERSION = 1
VFD DUTY Set
BOOTType : On
Standby Mgr Start Shell~~~~~~~~~~~~~~~~~~~~~~~
Standby Mgr Wait For Power Off
~~~~~~~~~~~~~~~ShellNEW script running~~~~~~~
>>AVMgr::AVMgr()<<AVMgr::AVMgr()>>AVMgr::Initialize
Partitions initialized
stapigat_open: major=254 minor=0
STAPIGAT_OpSTAPIGAT remapping successfull ...
enFilRegion (stapigat) busy at b9001000 lg 1000
STAPIGAT remapping successfull ...
eDeSTAPIGAT remapping successfull ...
v()STAPIGAT remapping successfull ...
:DSTAPIGAT remapping successfull ...
evSTAPIGAT remapping successfull ...
icSTAPIGAT remapping successfull ...
eSTAPIGAT remapping successfull ...
uSTAPIGAT remapping successfull ...
sed: /ACCESS 00000002
Open Read/Write
ACCESS 00000002
Open Read/Write
STPIO_GetRevision
STPIO_GetRevision
dev/stapi/stapigat
Old clock base adress= 0xb9000000 New clock base adress= 0x29848000 (linux)
Old SysCfg base adress= 0xb9001000 New SysCfg base adress= 0x2984c000 (linux)ACCESS 00000002
Open Read/Write
STMERGE_GETREVISION STMERGE-REL_2.1.1
ACCESS 00000002
Open Read/Write
Olopen sysconf device
d SYSCONF_IOCTL
sysconf Cfg0 read value = 0
sysconf cfd write value = 0
outpticore: Interrupt task started
put stage base adress= 0xb9005000 New output stage base adress= 0x29850000 (linux)
Old denc base adress= 0xb920c000 New denc base adress= 0x29854000 (linux)
Opticore: LoaderFunction called
pticore:TC code loaded
ld compo base adress= 0xb920a000 New compo base adress= 0x29858000 (linux)
Disp0 bACCESS 00000002
Open Read/Write
Region (STCLKRV_FS) busy at b9000000 lg ff
ClockRecoveryFilterTask Created..
ase adress= 0xb9002000 New Disp0 base adress= 0x2985c000 (linux)
Disp1 base adress= 0xb9003000 New Disp1 base adress= 0x29860000 (linux)
Old ttx base adress= 0xb8060ACCESS 00000002
Open Read/Write
ioctl command [0X00000E00]
STDENC_IOC_INIT
Region (DENC) busy at b920c000 lg 400
Info> STDenc version 12
Info> Device 'DENC' initialised
00ioctl command [0X00000E02]
STDENC_IOC_OPEN
Info> Handle opened on device 'DENC'
0 Nioctl command [0X00000E05]
STDENC_IOC_SETENCODINGMODE
Info> STDENC_SetEncodingMode done
ewACCESS 00000002
Open Read/Write
STVBI_IOC_INIT
Info> Handle opened on device 'DENC'
tACCESS 00000002
Open Read/Write
ioctl command [0X00000F00]
Region (VTG) busy at b9005000 lg 400
Region (CKGVTG) busy at b9000000 lg 1000
Region (SYSCFG) busy at b9001000 lg 400
Info> Device 'VTG' initialized
tioctl command [0X00000F02]
Info> Handle opened on device 'VTG'
xioctl command [0X00000F05]
bioctl command [0X00000F08]
aioctl command [0X00000F05]
sioctl command [0X00000F08]
e ioctl command [0X00000F00]
Region (VTG) busy at b9005034 lg 400
Region (CKGVTG) busy at b9000000 lg 1000
Region (SYSCFG) busy at b9001000 lg 400
Info> Device 'VTG_AUX' initialized
aioctl command [0X00000F02]
Info> Handle opened on device 'VTG_AUX'
dioctl command [0X00000F05]
rioctl command [0X00000F08]
ess= 0x2ACCESS 00000002
Open Read/Write
ioctl command [0X00001000]
Info> Handle opened on device 'DENC'
Region (VOUT) busy at b9005000 lg 1000
Region (SYSCFG) busy at b9001000 lg 400
Region (HDMI) busy at b9005000 lg 400
Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
9ioctl command [0X00001002]
Info> STVOUT_Open Device 'VOUT' : Done
ioctl command [0X0000100B]
Info> STVOUT_SetInputSource : Done
8ioctl command [0X00001007]
Info> STVOUT_SetOutputParams : Done
ioctl command [0X00001006]
Info> STVOUT_Enable : Done
64ioctl command [0X00001000]
Region (VOUT) busy at b9005000 lg 1000
Region (SYSCFG) busy at b9001000 lg 400
Region (HDMI) busy at b9005000 lg 400
Info> STVOUT_Init Device 'VOUT_HD' (Denc version 0) : Done
0ioctl command [0X00001002]
Info> STVOUT_Open Device 'VOUT_HD' : Done
ioctl command [0X00001007]
Info> STVOUT_SetOutputParams : Done
0ioctl command [0X00001006]
Info> STVOUT_Enable : Done
ioctl command [0X00000F06]
0 (liioctl command [0X00001000]
Region (VOUT) busy at b9005800 lg 1000
Region (SYSCFG) busy at b9001000 lg 400
Region (HDMI) busy at b9005800 lg 400
Region (HDCP) busy at b9005400 lg 400
nux)
Old Blitterequest pin : port = 2 , Index = 2, Name = PIO2 , BitConfig = 0x4, Int Handler = 0xc01d5ac0
Info> Internal task created.
r base adress= 0 Info> STVOUT_Init Device 'VOUT_HDMI' (Denc version 0) : Done
xioctl command [0X00001002]
Info> STVOUT_Open Device 'VOUT_HDMI' : Done
ioctl command [0X00001006]
Info> Handle opened on device 'VTG'
b920b000 New Blitter base adress= 0x29868000 (linux)
No errors during initialisation
========================================= Info> Handle closed on device 'VTG'
Info> STVOUT_Enable : Done
ioctl command [0X00001011]
Info> STVOUT_Start : Done
ACCESS 00000002
Open Read/Write
Info> STVOUT_Open Device 'VOUT_HD' : Done
Info> STVOUT_GetDacSelect : Done
Info> STVOUT_Close Device 'VOUT_HD' : Done
Region (VMIX) busy at b920ac00 lg 1000
=============================
Test Application
May 14 2007 - 15:26:14
ICache = OFF DCache = OFF
UNIFIED_MEMORY: FALSE
======================================================================
[ DRIVER: INIT] [696532992]: >>>>Setup
(int STEvent::Setup() in /home/kdhong/devel/ufs910/ddwrapper/STEvent.cpp 82)
[ DRIVER: TRACE] [696532992]: EVT_Setup(EVT)= (int STEvent::Setup() in /home/kdhong/devel/ufs910/ddwrapper/ Info> Device 'VMIX' init
ialised
ST Info> Handle opened on device 'VMIX'
Event.cpp 98)
[ DRIVER: TRACE] [696532992]: STEVT-REL_2.1.1
(int STEvent::Setup() in /home/kdhong/devel/ufs910/ddwrapper/STEvent.cpp 101)
[ DRIVER: TRACE] [696532992]: EVT_Open= (int STEvent::Setup() in /home/kdhong/devel/ufs910/ddwrapper/STEvent.cpp 102)
[ DRIVER: INIT] [696532992]: <<<<Setup
(int STEvent::Setup() in /home/kdhong/devel/ufs910/ddwrap Info> Mixer disabled successfully
Info> Time base set successfully
ioctl command [0X00000F08]
per/ Info> Screen params set successfully
S Info> Mixer enabled successfully
T Info> STVOUT_Open Device 'VOUT' : Done
Info> STVOUT_GetDacSelect : Done
Info> STVOUT_Close Device 'VOUT' : Done
Region (VMIX) busy at b920ad00 lg 1000
Event.cpp 104)
STMERGE initializing, revision=STMERGE-REL_2.1.1 ...NORMAL mode, Setup for TSin0
Support CI interface : Connect TS1 to PTI0
sys conf dev fd = 7
sys conf : Connect TS1394 to TSMerge Conf
>>STDemuxDevice::STDemuxDevice
<<STDemuxDevice::STDemuxDevice device Name =PTI
>>STDemuxDevice::Setup
STDemuxDevice PTI Merge Path = 33
PTI_Setup(PTI, STPTI_STREAM_ID_TSIN1)= STPTI_DVB-REL_6.6. Info> Device 'VMIX_AUX' initialised
3 Info> Handle opened on device 'VMIX_AUX'
A0
PTI_Open=ST_NO_ERROR
PTI_Slots(FilterSetup() = ST_NO_ERROR
<< STfilter Dev
FilterSetup() = ST_NO_ERROR
<< STfilter Dev
FilterSetup() = ST_NO_ERROR
<< STfilter Dev
FILTERS VIDEO = 76bb60, Audio = 771958, PCR = 777750, PIP = 77d548
FilterSetup() = ST_NO_ERROR
<< STfilter Dev
FilterSetup() = ST_NO_ERROR
<< STfilter Dev
FilterSetup() = ST_NO_ERRO Info> Mixer disabled successfully
Info> Time base set successfully
ioctl command [0X00000F08]
R
Info> Screen params set successfully
<< Info> Mixer enabled successfully
STfiACCESS 00000002
Open Read/Write
Region (VIDEO LAYER) busy at b9002000 lg 1000
Video LAYER virtual io kernel address of phys B9002000 = B9002000
Region (COMPOSITOR LAYER) busy at b920a000 lg c00
STLAYER - VIDEO :Compositor LAYER virtual io kernel address of phys B920A000 = B920A000
HF Buffer:Virt:a7e6ae80 Dev:7e6ae80
HF2 Buffer:Virt:a7e6ad00 Dev:7e6ad00
VF Buffer:Virt:a7e6ac00 Dev:7e6ac00
VF2 Buffer:Virt:a7e6ab00 Dev:7e6ab00
HF Buffer:Virt:a7e6a980 Dev:7e6a980
HF2 Buffer:Virt:a7e6a800 Dev:7e6a800
VF Buffer:Virt:a7e6a700 Dev:7e6a700
VF2 Buffer:Virt:a7e6a600 Dev:7e6a600
lter Dev
FilteRegion (VIDEO LAYER) busy at b9003000 lg 1000
Video LAYER virtual io kernel address of phys B9003000 = B9003000
Region (COMPOSITOR LAYER) busy at b920a000 lg c00
STLAYER - VIDEO :Compositor LAYER virtual io kernel address of phys B920A000 = B920A000
HF Buffer:Virt:a7e6a480 Dev:7e6a480
HF2 Buffer:Virt:a7e6a300 Dev:7e6a300
VF Buffer:Virt:a7e6a200 Dev:7e6a200
VF2 Buffer:Virt:a7e6a100 Dev:7e6a100
HF Buffer:Virt:a7e69f80 Dev:7e69f80
HF2 Buffer:Virt:a7e69e00 Dev:7e69e00
VF Buffer:Virt:a7e69d00 Dev:7e69d00
VF2 Buffer:Virt:a7e69c00 Dev:7e69c00
rSetup() = STRegion (LAYER) busy at b920a000 lg 1000
LAYER virtual io kernel address of phys 0xb920a100 = 0xb920a000
Info> STLAYER - GFX : Create task GDP-BKL-CUR
Info> STLAYER - GFX : Layer init OK
_N Info> STLAYER - GFX : Layer open OK
O_ERRORegion (LAYER) busy at b920a000 lg 1000
LAYER virtual io kernel address of phys 0xb920a200 = 0xb920a000
Info> STLAYER - GFX : Create task GDP-BKL-CUR
Info> STLAYER - GFX : Layer init OK
Info> STLAYER - GFX : Layer open OK
<< STfil Info> STLAYER - GFX : Layer open OK
ter Dev
FilterSetup() = ST_NO_ERROR
<< STfilter Dev
F Info> STLAYER - GFX : Synchro Vsync is OK
ilterSetup() = ST_NO_ERROR
<< STfilter Dev
)
>>STClockRecoveryDevice::Setup
CLKRV_Setup(CLKRV)=STCLKRV-REL_5.3.1
CLKRV_Open=ST_NO_ERROR
<<STClockRecoveryDevice::Setup
>>STDencDevice::Setup
DENC_Setup(DENC)=STDENC-REL_3.3.17
DENC_Open=ST_NO_ERROR, DENC_Handle: -1072114176
>>STDencDevice::DENC_SetMode
DENC_SetMode(STDENC_MODE_PALBDGHI)=ST_NO_ERROR
<<STDencDevice::DENC_SetMode
<<STDencDevice::Setup
VBI Info> Layers connected successfully
_Setup(VBI)=STVBI-REL_1.3.4
>>STDencDev::Setup
VTG_Setup(VTG)=STVTG-REL_1.13.8
VTG_Open=ST_NO_ERROR, VTG_Handle: -1071979200
STDENC_MODE_PALBDGHI)=ST_NO_ERROR
VTG_GetMode(XYWH 134,46,720,576, 50000,1)=ST_NO_ERROR
ST_NO_ERROR
VTG_GetMode(XYWH 192,44,1920,1080, 50000,1)=ST_NO_ERROR
>>STDencDev::Setup
VTG_Setup(VTG_AUX)=STVTG-REL_1.13.8
VTG_Open=ST_NO_ERROR, VTG_Handle: -1071979208
STDENC_MODE_PALBDGHI)=ST_NO_ERROR
VTG_GetMode(XYWH 134,46,720,576, 50000,1)=ST_NO_ERROR
denc = EVT, evt = DENC, vtg= VTG, hdmi_support = 1, output_hd= 2, vidio_hd = 1
VOUT_Setup(VOUT)=vout_init_params_, device type =a, output type = 8
STVOUT-REL_4.1.0
VOUT_Open=ST_NO_ERROR
STVOUT_Enable=ST_NO_ERROR
denc = EVT, evt = DENC, vtg= VTG, Info> Layers connected successfully
hdmi_sACCESS 00000002
Open Read/Write
STVIDTEST: ioctl command 0 [0x00007e00]
upportACCESS 00000002
Open Read/Write
STVID: ioctl command 2 [0x00003f02]
Info> Injection task created.
= 0, output_hd=VID virtual io kernel address of phys 0xb9214000 = 0xb9214000
Info> Bit buffer allocated at address 0x7987900
2, vidio_hd = 1
VOUT_Setup(VOUT_HD)=STVOUT-REL_4.1.0
STVOUT_SetOutput Info> Transformer(preprocessor) initialized, handle -2055717536
Params=ST_NO_ERROR
denc = EVT, evt = DENC, vtg= VTG, hdmi_support = 1, output_hd= 0, vidio_hd = 1
VOUT_Setup(VOUT_HDMI)=hdmi in vout
HDMICell~~~~~~~~~~~~~~~~Event Name = EVT
~~~~~~~~~~~~~~~~~~~~~~~~~~~must be checke next line for hdmi i2c interface~~~~~~~~
STVOUT-REL_4.1.0
STVMIX-REL_2.0.7
VMIX_Open=ST_NO_ERROR
VTG_GetMode(XYWH 192,44,1920,1080, 50000,1)=ST_NO_ERROR
vtg get mode succeed.
VTG_GetMode(XStart= 192,YStart=44 ActiveAreaWidth= 1920,ActiveAreaHeight=1080 ScanType=1,FrameRate=50000)
VMIX_SetScreenParams(VMIX, 192,42,1920,1080, 50000,1,0 )
st_video_mix_init_params.VTGName VTG_AUX
VMIX_Init VMIX_AUX=STVMIX-REL_2.0.7
VMIX_Open=ST_NO_ERROR
VTG_GetMode(XYWH 134,46,720,576, 50000,1)=ST_NO_ERROR
vtg get mode succeed.
VTG_GetMode(XStart= 134,YStart=46 ActiveAreaWidth= 720,ActiveAreaHeight=576 ScanType=1,FrameRate=50000)
VMIX_SetScreenParams(VMIX_AUX, 144,48,720,576, 50000,1,1 )
[ DRIVER: TRACE] [696532992]: VTG_GetMode(XYWH 192,44,1920,1080, 50000,1)=ST_ERROR_BAD_PARAMETER (int STLayerDevice::Setup() in /home/k
dhong/devel/ufs910/ddwrapper/STLayerDevice.cpp 154)
Layer Video Init
LAYER_Setup(VIDEO)=ST_NO_ERROR
STLAYER-RELInit Transformer Failed...
Info> Transformer(decoder) initialized, handle 1082130432
Region (VID DISP) busy at b9002000 lg 1000
VID DISP io kernel address of phys 0xb9002000 = 0xb9002000 (HAL 0)
!!!! viddisp_DisplayTaskFunc Started !!!
!!!! viddisp_DisplayTaskFunc Started !!!
Info> Speed task created.
Info> Error recovery task created.
Info> Device 'VID' initialised
_3.7.4
STVID: ioctl command 3 [0x00003f03]
Info> Synchronization delay set to 0.
Info> Video handle opened on device 'VID'
LAYSTVID: ioctl command 47 [0x00003f2f]
ER_Open=SSTVID: ioctl command 47 [0x00003f2f]
STVID: ioctl command 58 [0x00003f3a]
STVID: ioctl command 61 [0x00003f3d]
Setup: Partition has handle:c01817ec
STVID: ioctl command 61 [0x00003f3d]
Setup: Partition has handle:c01817ec
STVID: ioctl command 61 [0x00003f3d]
Setup: Partition has handle:c01817d8
STVID: ioctl command 22 [0x00003f16]
STVID: ioctl command 22 [0x00003f16]
T_NO_ERROR
LAYER_SetLayerParams(0)=ST_NO_ERROR
[ DRIVER: TRACE] [696532992]: VTG_GetMode(XYWH 134,46,720,576, 50000,1)=ST_NO_ERROR (int STLayerDevice::Setup() in /home/kdhong/devel/u
fs910/ddwrappe Info> STAUD_Open : done
r/STLayACCESS 00000002
Open Read/Write
ioctl command [0X00001100]
Info> Handle opened on device 'VTG'
Info> STVOUT_Open Device 'VOUT_HDMI' : Done
Info> STHDMI_Init Device 'HDMI' : Done
ioctl command [0X00001102]
Info> STHDMI_Open Device 'HDMI' : Done
erDevice.cpp 154)
Layer Aux Video Init
LAYER_Setup(AUX_VIDEO)=ST_NO_ERROR
STLAYER-REL_3.7.4
LAYER_Open=ST_NO_ERROR
LAYER_SetLayerParams(0)=ST_NO_ERROR
[ DRIVER: TRACE] [696532992]: VTG_GetMode(XYWH 192,44,1920,1080, 50000,1)=ST_NO_ERROR (int STLayerDevice::Setup() in /home/kdhong/devel
/ufs910/ddwrSTVID: ioctl command 68 [0x00003f44]
Info> STVID_Start()...
Info> Allocate 6 Frame buffers [1920;1088]
Info> Allocated frame buffer at address 0x13749000
Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
Info> Allocated frame buffer at address 0x1344c000
Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
Info> Allocated frame buffer at address 0x1314f000
Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
Info> Allocated frame buffer at address 0x12e52000
Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
Info> Allocated frame buffer at address 0x12b55000
Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
Info> Allocated frame buffer at address 0x12858000
Info> Total: 0x002fd000, Y: 0x001fe000, C: 0x000ff000
Info> Allocated secondary frame buffer at address 0x078c6000
Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
Info> Allocated secondary frame buffer at address 0x07806000
Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
Info> Allocated secondary frame buffer at address 0x07746000
Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
Info> Allocated secondary frame buffer at address 0x07686000
Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
Info> Allocated secondary frame buffer at address 0x075c6000
Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
Info> Allocated secondary frame buffer at address 0x07506000
Info> Total: 0x000c0000, Y: 0x00080000, C: 0x00040000
Info> vidprod_Start() called
Info> push Producer RESET
Info> STVID_Start() done.
START ES buffer Base:7987900 - Top:7e69bff
SC buffer Base:6401700 - Top:642e6f0
PES buffer Base:642e700 - Top:6444eff
Info> PROD RESET
Info> BitBuffer Underflow, BBL=0
apper/STLayerDevice.cpp 154)
LAYER_Setup(OSD)=ST_NO_ERROR
STLAYER-REL_3.7.4
LAYER_Open=ST_NO_ERROR
LAYER_SetLSTVID: ioctl command 28 [0x00003f1c]
ayerParams(0)=STVID: ioctl command 51 [0x00003f33]
NewInputWrite_p:0x0642e700
ST_NO_ERROR
[ DRIVER: TRACE] [696532992]: VTG_GetMode(XYWH 134,46,720,576, 50000,1)=ST_NO_ERROR (int STLayerDevice::Setup() in /home/kdhong/devel/u
fs910/ddwrapper/STLayerDevice.cpp 154)
LAYER_Setup(OSD2)=ST_NO_ERROR
STLAYER-REL_3.7.4
LAYER_Open=ST_NO_ERROR
LAYER_SetLayerParams(open stpio
Request PIO pin number = 4, port number = 2
0)=ST_NO_ERROR
[ DRIVER: INIT] [696532992]: mLayerName[0] = VIDEO (int STVideoMixDevice::ConnectLayer() in /home/kdhong/devel/ufs910/ddwrapper/STVide
oMixDevice.cpp 292)
[ DRIVER: INIT] [696532992]: mLayerName[1] = OSD (int STVideoMixDevice::ConnectLayer() in /home/kdhong/devel/ufs910/ddwrapper/STVideoM
ixDevice.cpp 292)
STVMIX_ConnectLayers(): device layer name = VIDEO
STVMIX_ConnectLayers(): device layer name = OSD
STVMIX_ConnectLayers():SUCCESS
[ DRIVER: INIT] [696532992]: mLayerName[0] = AUX_VIDEO (int STVideoMixDevice::ConnectLayer() in /home/kdhong/devel/ufs910/ddwrapper/ST
VideoMixDevice.cpp 292)
STVMIX_ConnectLayers(): device layer name = AUX_VIDEO
STVMIX_ConnectLayers():SUCCESS
Opening /dev/stapi/stvidtest_ioctl
STVIDTEST_Init():Device 'VIDTEST' initialised
VIDTEST_Init done : ok
~~~~~~~~~~~~Stream H264
VIDEO_USED: 1, max device = 3
Opening /dev/stapi/stvid_ioctl
STVID_Init():Device 'VID' initialised
1
STVID-REL_3.13.22
STVID_Open():Device 'VID' opened (Hdl: 0xc037eb0c)
STVidDevice::Setup : Layer vide name = VIDEO
VID Main View Port opened
STVidDevice::Setup : Layer vide name = AUX_VIDEO
STAUD SETUP
Aud Drv = [STAUDLX-REL_1.0.2]:Recommended LX = [HEGRnD_CBL_ACC_AMP_BL017_0]:Current LX = [HEGRnD_CBL_ACC_AMP_BL017]
AUD_Open=0, handle = 85739740
STV6412: write data error 0
STV6412: write data error 1
STV6412: write data error 2
STV6412: write data error 3
STV6412: write data error 4
STV6412: write data error 5
STV6412: write data error 6
~~~~~~~~~~~~~~~~~~~~~~~~~~AK4705 Reset Start
~~~~~~~~~~~~~~~~~~~~~~~~~~AK4705 Reset End
STV6412: write data error 1
STV6412: write data error 2
STV6412: write data error 3
STV6412: write data error 4
[ DRIVER: TRACE] [696532992]: Video Device Start (ST_ErrorCode_t AVMgr::StartAV(int) in /home/kdhong/devel/ufs910/ddwrapper/AVMgr.cpp 3
75)
STVID_Start(handle=0xc037eb0c,¶m=0x7bfff8e4) : ok
realtime=1 updatedisplay=1 streamtype=2 (PES)
streamid=255 broadcast=1 (DVB) decodeonce=0
[ DRIVER: TRACE] [696532992]: Audio Device Start (ST_ErrorCode_t AVMgr::StartAV(int) in /home/kdhong/devel/ufs910/ddwrapper/AVMgr.cpp 3
82)
STAUD_IPGetInputBufferParams:BufferBaseAddr_p(0x4831480) BufferSize(131072)
Event = 150004 STVID_DATA_UNDERFLOW_EVT
AUD_DRStart(content=1, stream_type=2)=0
func_get_write_add returned to kernel: c01f6d80
func_inform_read_add returned to kernel: c01f6e80
[ MW: TRACE] [696532992]: Open Xml File Name: /config//satinfo.xml
(int XmlParser::Load() in /home/kdhong/devel/ufs910/mw/xml/XmlParser.cpp 83)
[ MW: ERROR] [696532992]: No File Exist : satinfo.xml (int XmlParser::Load() in /home/kdhong/devel/ufs910/mw/xml/XmlParser.cpp 98)
EnableLNb value = Request PIO pin number = 6, port number = 1
Request PIO pin number = 7, port number = 1
0
Token Mismatich
Phantom driver firmware does not download yet.... now download
Phantom driver firmware already downloaded... firmware version = 0
microcode length = 32501
Handle = 15
~~~~~~~~~~~~~nim init
VFD_Driver Init
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
VFD_Controller Type : NEW Kathrein VFD
VFD DUTY Set
[ DRIVER: TRACE] [753843024]: NIM Thread Started (static void* NimDevice::NimThreadFunc(void*) in /home/kdhong/devel/ufs910/ddwrapper/N
imDevice.cpp 123)
~~~~~~~~~~~~~application_cas
~~~~~~~~~~~~~application_cas Constructor in
~~~~~~~~~~~~~application_cas this setting
~~~~~~~~~~~~~application_cas init and out
~~~~~~~~~~~~~application_cas init end
++++MMI:Before Wait
++++MMI:BACCESS 00000002
Open Read/Write
Region (BLIT) busy at b920b000 lg 1000
efore Wait
PHYS_DRVOpen Info> Device 'BLITTER' initialised
Info> Handle opened on device 'BLITTER'
Change Partition : 0
: pDRVSTLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6447900
Data: 7b3e20
Open: DeviceName : /dev/cimax_dev1
Device CIMAX Init
CI_INITopen cimax device
dvb_ci_a_base_adr = 0xa3000000,
CI_INIT dvb_ci_b_base_adr = 0xa3000000,
cimax i2c device open success
blit_init_params.BlitInterruptNumber=9C
use STLAYER_AllocData to allocate data...AllocParams.Size:3686400
STLAYER_AllocData(): Address Kernel :0xa6447900 Address User :Change Partition : 0
0x32 Info> STLAYER - API : Bad Handle
6ec900
CI_STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa67cb900
MAX first Initialization Done !
CIMaX initialization
Slot ID =1 Opened
[0] Open Slot id: 1 4
Open: DeviceName : /dev/cimax_dev0
Slot ID = 0 Opened
[1] Open Slot id: 0 4
PHYSICAL_Init: ph_buff: 7b4398
[ DRIVER: WARNING] [696532992]: Already Freed!! (ST_ErrorCode_t STBitmap::Free() in /home/kdhong/devel/ufs910/ddwrapper/STBitmap.cpp 188)
STLAYE Info> STLAYER - GFX : Viewport request
R_CloseViewPort():Device ViewPort closed
[ DRIVER: ERROR] [696532992]: ST_ERROR_INVALID_HANDLE (ST_ErrorCode_t STLayerDevice::CloseViewport() in /home/kdhong/devel/ufs910/ddwra
pper/STLayerDevice.cpp 261)
use STLAYER_AllocData to allocate data...AllocParams.Size:4147200
STLAYER_AllocData(): Address Kernel :0xa67cb900 Address User : 0x32a74900
STLAYER_OpenVieSTLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6bc0100
wPort():BITMAP Layer:
kernel Data1 Address: 0xa67cb900
kernel Data2 Address: 0x0
usSTLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6c8a900
e STLAYER_AllocData to allocate data...AllocParams.Size:829440
STLAYER_AllocData(): A Info> STLAYER - GFX : Viewport request
ddress Kernel :0xa6bc0100 Address User : 0x32e6c100
use STLAYER_AllocData to allocate data...AllocParams.Size:829440
STLAYER_AllocData(): Address Kernel :0xa6c8a900 Address User : 0x32f38900
STLAYER_OpenViewPort():BITMAP Layer:
kernel Data1 Address: 0xa6c8a900
kernel Data2 Address: 0x0
ENABLE VIEWPORT
Info> Layers disconnected successfully
Info> Handle closed on device 'VMIX_AUX'
Trying to free nonexistent resource <b920ad00-b920bcff>
The I/O memory region 0xb920ad00 is released successfully
Info> Device 'VMIX_AUX' terminated
ioctl command [0X00001005]
Info> STVOUT_Disable : Done
ioctl command [0X00001003]
Info> STVOUT_Close Device 'VOUT' : Done
ioctl command [0X00001001]
Info> Handle closed on device 'DENC'
The I/O memory region 0xb9005000 is released successfully
Trying to free nonexistent resource <b9001000-b90013ff>
The I/O memory region 0xb9001000 is released successfully
STLINUX_UnmapRegion(): 0xb9005000 Non existing region...
STLINUX_UnmapRegion(): 0xb7291718 Non existing region...
Info> STVOUT_Term Device 'VOUT' : Done
ioctl command [0X00000F03]
Info> Handle closed on device 'VTG_AUX'
ioctl command [0X00000F01]
STLINUX_UnmapRegion(): 0xb9005034 Non existing region...
The I/O memory region 0xb9000000 is released successfully
Trying to free nonexistent resource <b9001000-b90013ff>
The I/O memory region 0xb9001000 is released successfully
Info> Device 'VTG_AUX' terminated
>>STDencioctl command [0X00000F00]
Region (SYSCFG) busy at b9001000 lg 400
Info> Device 'VTG_AUX' initialized
Dev::ioctl command [0X00000F02]
Info> Handle opened on device 'VTG_AUX'
Setuioctl command [0X00000F05]
p
VTioctl command [0X00000F08]
G_Setuioctl command [0X00001000]
Info> Handle opened on device 'DENC'
Region (VOUT) busy at b9005000 lg 1000
Region (SYSCFG) busy at b9001000 lg 400
Region (HDMI) busy at b9005000 lg 400
Info> STVOUT_Init Device 'VOUT' (Denc version 12) : Done
p(VTG_Aioctl command [0X00001002]
Info> STVOUT_Open Device 'VOUT' : Done
ioctl command [0X0000100B]
Info> STVOUT_SetInputSource : Done
UX)=Sioctl command [0X00001007]
Info> STVOUT_SetOutputParams : Done
ioctl command [0X00001006]
Info> STVOUT_Enable : Done
TVTG-RE Info> STVOUT_Open Device 'VOUT' : Done
Info> STVOUT_GetDacSelect : Done
Info> STVOUT_Close Device 'VOUT' : Done
Region (VMIX) busy at b920ad00 lg 1000
L_1.13.8
VTG_Open=ST_NO_ERROR, VTG_Handle: -1071979208
STDENC_MODE_PALBDGHI)=ST_NO_ERROR
VTG_GetMode(XYWH 134,46,720,576, 50000,1)=ST_NO_ERROR
denc = EVT, evt = DENC, vtg= VTG, hdmi_support = 1, output_hd= 2, vidio_hd = 1
VOUT_Setup(VOUT)=vout_init_params_, device type =a, output type = 8
STVOUT-REL_4.1.0
VOUT_Open=ST_NO_ERROR
STVOUT_Enable=ST_NO_ERROR
st_video_mix Info> Device 'VMIX_AUX' initialised
_in Info> Handle opened on device 'VMIX_AUX'
it_params.VTGName VTG_AUX
VMIX_Init VMIX_AUX=STVMIX-REL_2.0.7
VMIX_Open=ST_NO_ERROR
Info> Mixer disabled successfully
Info> Time base set successfully
ioctl command [0X00000F08]
VTG_G Info> Screen params set successfully
e Info> Mixer enabled successfully
tMode(XYWH 1 Info> STLAYER - GFX : Layer open OK
34,46,720,576, 50000,1)=ST_NO_ERROR
vtg get mode succeed.
VTG_GetMode(XStart= 134,YStart=46 ActiveAreaWidth= 720,ActiveAreaHeight=576 ScanType=1,FrameRate=50000)
VMIX_SetScreenParams(VMIX_AUX, 144,48,720,576, 50000,1,1 ) Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
Error> ChangeViewportParams() failed. Error = 0x150005 !
Error> STLAYER_AdjustViewPortParams failed. Error = 0x1 !
Error> ChangeViewportParams() failed. Error = 0x150005 !
Info> STLAYER - GFX : Synchro Vsync is OK
[ DRIVER: INIT] [696532992]: mLayerName[0] = AUX_VIDEO (int STVideoMixDevice::ConnectLayer() in /home/kdhong/devel/ufs910/ddwrapper/ST
VideoMixDevice.cpp Info> Layers connected successfully
292)
[ DRIVER: INIT] [696532992]: mLayerName[1] = OSD2 (int STVideoMixDevice::ConnectLayer() in /home/kdhong/devel/ufs910/ddwrapper/STVideo
MixDevice.cpp 292)
STVMIX_ConnectLayers(): device layer name = AUX_VIDEO
STVMIX_ConnectLayers(): device layer name = OSD2
STVMIX_ConnectLayers():SUCCESS
Serial RCU FD = 36
SET_LED prot port = 2, value = 0
SET_LED prot port = 0, value = 0
SET_LED prot port = 1, value = 0
Loader=hid
Loader=storage
Loader=none
Loader=gphoto-canon
c_iflag = 12400
c_oflag = 5
c_cflag = 16262
c_lflag = 105073
c_lcct = 0
USB Host Thread Before Parse
USB Host Thread Before ProcessChanges
LoadDriver = , none
USB Host Thread Before Polling
read
length = 28
SET_LED prot port = 2, value = 0
SET_LED prot port = 0, value = 0
SET_LED prot port = 1, value = 0
BOOTTYPE = 0
In Sync after stabilization
[PCR] PTI_PCRPID(STVID: ioctl command 23 [0x00003f17]
Info> Synchronization enabled.
device=0) : STC=0x1,e3dba994
Subsys - INFO: Set SUB_SYS_PROPERTY_AUDIO_TRACK: APid = 402
Calling SubSysSetProperty with property 19
SubSysPropertyHandler : 19
SelectAudioTrack : PID = 402
STAUDIO AVSYNC SKIPPING : 57
STAUDIO OUT OF SYNC
STAUDIO AVSYNC SKIPPING : 57
STAUDIO OUT OF SYNC
STAUDIO AVSYNC SKIPPING : 89
STAUDIO OUT OF SYNC
STAUDIO AVSYNC SKIPPING : 57
STAUDIO OUT OF SYNC
STAUDIO IN SYNC
STAUDIO IN SYNC
Time information received : Thu Jul 5 16:51:57 2007
Subsys - INFO: Set automatic DayLightSavingTime switching
Subsys - INFO: LocalTime is now valid (2007-07-05T18:51:57)
Subsys - INFO: GarantieStartCounter = 10
Subsys - INFO: Free DB Memory: 2009280 [Time: 2007-07-05T18:51:57]
Subsys - INFO: CurrentTime = 2007-07-05T18:51:57
Subsys - INFO: ACQ Time = 2007-07-05T03:00:00
Subsys - INFO: User is watching TV, so do ACQ after user press StandBy
Subsys - INFO: New SI_ACQ_Time = 2007-07-06T03:00:00
!!!!!!! 1, 1079, 28006, Hörfilm 2
!!!!!!! 1, 1079, 28006, Hörfilm 2
Subsys - INFO: Audio option inserted. Pid: 403 - 'französisch' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 402 - 'stereo' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 403 - 'französisch' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 402 - 'stereo' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 403 - 'französisch' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 402 - 'stereo' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 403 - 'französisch' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 402 - 'stereo' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 403 - 'französisch' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 402 - 'stereo' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 403 - 'französisch' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 402 - 'stereo' Sid: 28109, Oid: 1, Tsid: 1101,
!!!!!!! 1, 1079, 28006, Hörfilm 2
!!!!!!! 1, 1079, 28006, Hörfilm 2
Subsys - INFO: Free DB Memory: 1973376 [Time: 2007-07-05T18:52:08]
!!!!!!! 1, 1079, 28006, Hörfilm 2
!!!!!!! 1, 1079, 28006, Hörfilm 2
Subsys - INFO: Audio option inserted. Pid: 403 - 'französisch' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 402 - 'stereo' Sid: 28109, Oid: 1, Tsid: 1101,
Change To Schdule Event
Subsys - INFO: Free DB Memory: 1956800 [Time: 2007-07-05T18:52:19]
Key = 000000002290005c 00 OK RC660
KeyCount = 0
SET_LED prot port = 0, value = 1
Subsys - INFO: get key: 1
STLAYER_IOC_ALLOCDATAc 01 OK RC660
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6403400
KeyCount = 1
STLAYER_AllocData(): Address Kernel :0xa6403400 Address User : 0xSTLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6404400
34ab4400
STLAYER_AllocData(): Address KernSTLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6404d00
el :0xa6404400 Address User : 0x35574400
STLAYER_AllocData(): Address Kernel :0xa6404d00 Address User : 0x35578d00
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6406100
STLAYER_AllocData(): Address Kernel :0xa6406100 Address User : 0x3557c100
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6406a00
STLAYER_AllocData(): Address Kernel :0xa6406a00 Address User : 0x35580a00
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6407900
STLAYER_AllocData(): Address Kernel :0xa6407900 Address User : 0x35584900
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6408800
STLAYER_AllocData(): Address Kernel :0xa6408800 Address User : 0x35588800
+++++ STLAYER_GetSTLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6409500
BitmapAllocParams() succeeded! +++++
STLAYER_AllocData(): Address Kernel :0xa6409500 Address User : 0x3558c500
+++++ STLAYER_AllocData() succeeded! +++++
Info> STAVMEM_FreeBuffer() : Address to free 0xa6403400
SET_LED prot port = 0, value = 0
Subsys - INFO: showPipNative
STVID: ioctl command 56 [0x00003f38]
STVID: ioctl command 25 [0x00003f19]
CallSTVID: ioctl command 59 [0x00003f3b]
STVID: ioctl command 59 [0x00003f3b]
STVID: ioctl command 57 [0x00003f39]
ing SubSSTVID: ioctl command 57 [0x00003f39]
ysSetProperty with property 10
SubSysPropertyHandler : 10
Input = [0, 0, 720, 576] Output = [0, 0, 1920, 1080]
Subsys - INFO: Audio option inserted. Pid: 403 - 'französisch' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Audio option inserted. Pid: 402 - 'stereo' Sid: 28109, Oid: 1, Tsid: 1101,
Subsys - INFO: Free DB Memory: 1768256 [Time: 2007-07-05T18:52:30]
Key = 000000002290005c 00 OK RC660
KeyCount = 0
SET_LED prot port = 0, value = 1
SuSTVID: ioctl command 56 [0x00003f38]
bsys - ISTVID: ioctl command 25 [0x00003f19]
NFO: get key: 1
Subsys -STVID: ioctl command 59 [0x00003f3b]
STVID: ioctl command 59 [0x00003f3b]
INFO: hidePipNaSTVID: ioctl command 57 [0x00003f39]
tive
Calling SubSysSetProperty with property 10
SubSysPropertyHandler : 10
Input = [0, 0, 720, 576] Output = [1200, 14STVID: ioctl command 57 [0x00003f39]
2, 480, 270]
Key = 000000002290005c 01 OK RC660
KeyCount = 1
Info> STAVMEM_FreeBuffer() : Address to free 0xa6408800
Info> STAVMEM_FreeBuffer() : Address to free 0xa6407900
Info> STAVMEM_FreeBuffer() : Address to free 0xa6406a00
Info> STAVMEM_FreeBuffer() : Address to free 0xa6406100
Info> STAVMEM_FreeBuffer() : Address to free 0xa6404d00
Info> STAVMEM_FreeBuffer() : Address to free 0xa6404400
SET_LED prot port = 0, value = 0
Key = 000000002290005c 00 OK RC660
KeyCount = 0
SET_LED prot port = 0, value = 1
Subsys - INFO: get key: 1
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6403400
STLAYER_AllocData(): Address Kernel :0xa6403400 ASTLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6404400
ddress User : 0x34ab4400
STLAYER_AllocData(): AddrSTLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6404d00
ess Kernel :0xa6404400 Address User : 0x35574400
Key = 000000002290005c 01 OK RC660
KeyCount = 1
STLAYER_AllocData(): Address Kernel :0xa6404d00 Address User : 0x35578d00
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6406100
STLAYER_AllocData(): Address Kernel :0xa6406100 Address User : 0x3557c100
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6406a00
STLAYER_AllocData(): Address Kernel :0xa6406a00 Address User : 0x35580a00
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6407900
STLAYER_AllocData(): Address Kernel :0xa6407900 Address User : 0x35584900
STLAYER_IOC_ALLOCDATA
Info> STAVMEM_AllocBuffer() : Address inserted : 0xa6408800
STLAYER_AllocData(): Address Kernel :0xa6408800 Address User : 0x35588800
Info> STAVMEM_FreeBuffer() : Address to free 0xa6403400
Subsys - INFO: Free DB Memory: 1702848 [Time: 2007-07-05T18:52:41]
SET_LED prot port = 0, value = 0
Subsys - INFO: showPiSTVID: ioctl command 56 [0x00003f38]
STVID: ioctl command 25 [0x00003f19]
pNative
Calling SuSTVID: ioctl command 59 [0x00003f3b]
bSysSetProperty STVID: ioctl command 59 [0x00003f3b]
STVID: ioctl command 57 [0x00003f39]
STVID: ioctl command 57 [0x00003f39]
with property 10
SubSysPropertyHandler : 10
Input = [0, 0, 720, 576] Output = [0, 0, 1920, 1080]
Key = 000000002290005c 00 OK RC660
KeyCount = 0
SET_LED prot port = 0, value = 1
SuSTVID: ioctl command 56 [0x00003f38]
STVID: ioctl command 25 [0x00003f19]
bsys - INFO: get key: 1
Subsys - INFO: hidePipNatSTVID: ioctl command 59 [0x00003f3b]
STVID: ioctl command 59 [0x00003f3b]
ive
CalSTVID: ioctl command 57 [0x00003f39]
STVID: ioctl command 57 [0x00003f39]
ling SubSysSetProperty with property 10
SubSysPropertyHandler : 10
Input = [0, 0, 720, 576] Output = [1200, 142, 480, 270]
Info> STAVMEM_FreeBuffer() : Address to free 0xa6408800
Info> STAVMEM_FreeBuffer() : Address to free 0xa6407900
Info> STAVMEM_FreeBuffer() : Address to free 0xa6406a00
Info> STAVMEM_FreeBuffer() : Address to free 0xa6406100
Info> STAVMEM_FreeBuffer() : Address to free 0xa6404d00
Info> STAVMEM_FreeBuffer() : Address to free 0xa6404400
SET_LED prot port = 0, value = 0