Public feed #603729

my dmesg

public text v1 · immutable
Raw Edit
·published 2007-07-05 01:06 UTC
rendered paste body
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #1: Wed Jul  4 10:07:01 CST 2007
    deng@dy.dybnu.cn:/home/obj/home/src/sys/FB7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2  (1607.33-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
  Cores per package: 2
usable memory = 1531940864 (1460 MB)
avail memory  = 1477500928 (1409 MB)
ACPI APIC Table: <HPQOEM SLIC-MPC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 2000
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ndis0: <Broadcom 802.11a/b/g WLAN> mem 0xc3000000-0xc3003fff irq 19 at device 0.0 on pci1
ndis0: [ITHREAD]
ndis0: NDIS API version: 5.1
fpudna in kernel mode!
ndis0: using obsoleted if_watchdog interface
ndis0: Ethernet address: 00:1a:73:2e:bc:89
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> mem 0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1ffffff irq 21 at device 5.0 on pci0
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <processor> at device 10.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc0004000-0xc0004fff irq 18 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0005000-0xc00050ff irq 22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x30b0-0x30b7,0x30a4-0x30a7,0x30a8-0x30af,0x30a0-0x30a3,0x3090-0x309f mem 0xc0006000-0xc0006fff irq 23 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcm0: <NVidia MCP51 High Definition Audio Controller> mem 0xc0000000-0xc0003fff irq 16 at device 16.1 on pci0
pcm0: [ITHREAD]
nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0x30b8-0x30bf mem 0xc0007000-0xc0007fff irq 17 at device 20.0 on pci0
nve0: Ethernet address 00:16:d3:90:6b:c2
miibus0: <MII bus> on nve0
e1000phy0: <Marvell 88E1118 Gigabit PHY> PHY 1 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
nve0: using obsoleted if_watchdog interface
nve0: Ethernet address: 00:16:d3:90:6b:c2
nve0: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROMs> at iomem 0xcf800-0xd0fff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <vendor 0x04d9 product 0x0499, class 0/0, rev 1.10/2.90, addr 2> on uhub0
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.02> at ata1-master PIO4
ad4: 76319MB <SAMSUNG HM080HI AB100-16> at ata2-master SATA150
pcm0: <HDA Codec: Conexant Venice>
pcm0: <HDA Driver Revision: 20070702_0046>
SMP: AP CPU #1 Launched!
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.EC0_.GBIF] (Node 0xffffff00011b0380), AE_NO_HARDWARE_RESPONSE
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.EC0_.BAT0._BIF] (Node 0xffffff00011b0240), AE_NO_HARDWARE_RESPONSE
GEOM_LABEL: Label for provider ad4s2 is msdosfs/SYSTERM.
GEOM_LABEL: Label for provider ad4s5 is ntfs/TOOLS.
GEOM_LABEL: Label for provider ad4s6 is msdosfs/DATA.
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
GEOM_LABEL: Label msdosfs/DATA removed.
GEOM_LABEL: Label for provider ad4s6 is msdosfs/DATA.
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
fpudna in kernel mode!
GEOM_LABEL: Label msdosfs/DATA removed.
arp: 192.168.0.1 moved from 06:50:49:10:5b:55 to 00:0b:b4:00:04:1c on nve0
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.EC0_.GBST] (Node 0xffffff00011b0360), AE_NO_HARDWARE_RESPONSE
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.EC0_.BAT0._BST] (Node 0xffffff00011b0220), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.EC0_.GBST] (Node 0xffffff00011b0360), AE_NO_HARDWARE_RESPONSE
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.EC0_.BAT0._BST] (Node 0xffffff00011b0220), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.EC0_.GBST] (Node 0xffffff00011b0360), AE_NO_HARDWARE_RESPONSE
ACPI Error (psparse-0626): Method parse/execution failed [\\_SB_.PCI0.EC0_.BAT0._BST] (Node 0xffffff00011b0220), AE_NO_HARDWARE_RESPONSE
ACPI Exception (evregion-0529): AE_NO_HARDWARE_RESPONSE, Returned by Handler for [EmbeddedControl] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_TZ_.TZS0._TMP] (Node 0xffffff0001199600), AE_NO_HARDWARE_RESPONSE