Public feed #602880

pat

public text v1 · immutable
Raw Edit
·published 2007-07-04 11:18 UTC
rendered paste body
-=[root@debian]=(/home/pat)# dmesg | grep IDE                       <(13:10:26)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ICH5: IDE controller at PCI slot 0000:00:1f.1
Probing IDE interface ide0...
Probing IDE interface ide1...
-=[root@debian]=(/home/pat)# dmesg | grep -A 4 ide                  <(13:11:51)
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000002ff40000 (usable)
--
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cee00000)
Detected 2663.339 MHz processor.
--
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
--
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
--
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
--
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Hitachi HDS721616PLAT80, ATA DISK drive
hdb: ASUS DVD-ROM DVD-E616P 0104, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6E040L0, ATA DISK drive
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 3
--
ide1 at 0x170-0x177,0x376 on irq 15
usb 4-2: new full speed USB device using uhci_hcd and address 2
hda: max request size: 512KiB
hda: 321672960 sectors (164696 MB) w/7384KiB Cache, CHS=20023/255/63, UDMA(100)
hda: cache flushes supported
--
Linux video capture interface: v2.00
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
drivers/media/video/usbvideo/quickcam_messenger.c: Logitech Quickcam Messenger USB v0.01
videodev: "QCM USB Camera" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
drivers/media/video/usbvideo/usbvideo.c: QCM on /dev/video0: canvas=320x240 videosize=320x240
input: QCM button as /class/input/input1
usbcore: registered new driver QCM
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input2
-=[root@debian]=(/home/pat)#                                        <(13:14:09)