mindbender

jtag> detectflash 0xFFC00000 
Query identification string:
        Primary Algorithm Command Set and Control Interface ID Code: 0x0002 (AMD/Fujitsu Standard Command Set)
        Alternate Algorithm Command Set and Control Interface ID Code: 0x0000 (null)
Query system interface information:
        Vcc Logic Supply Minimum Write/Erase or Write voltage: 2700 mV
        Vcc Logic Supply Maximum Write/Erase or Write voltage: 3600 mV
        Vpp [Programming] Supply Minimum Write/Erase voltage: 11500 mV
        Vpp [Programming] Supply Maximum Write/Erase voltage: 12500 mV
        Typical timeout per single byte/word program: 16 us
        Typical timeout for maximum-size multi-byte program: 0 us
        Typical timeout per individual block erase: 1024 ms
        Typical timeout for full chip erase: 0 ms
        Maximum timeout for byte/word program: 256 us
        Maximum timeout for multi-byte program: 0 us
        Maximum timeout per individual block erase: 8192 ms
        Maximum timeout for chip erase: 0 ms
Device geometry definition:
        Device Size: 4194304 B (4096 KiB, 4 MiB)
        Flash Device Interface Code description: 0x0002 (x8/x16)
        Maximum number of bytes in multi-byte program: 1
        Number of Erase Block Regions within device: 2
        Erase Block Region Information:
                Region 0:
                        Erase Block Size: 65536 B (64 KiB)
                        Number of Erase Blocks: 63
                Region 1:
                        Erase Block Size: 8192 B (8 KiB)
                        Number of Erase Blocks: 8
jtag>