Public feed #600588

Mine

public text v1 · immutable
Raw Edit
·published 2007-07-02 23:27 UTC
rendered paste body

*
[CLOC]
[MEMC]
[COPY]
[CODE]
[JRAM]
[DATA]
[ZBSS]
[ITLB]
[CACH]
[USEC]
[DBGI]
[MAIN]

MMON V1.4.4-17  [STW4X225-USDTV-Hisense] Jan 11 2005 16:18:52
Copyright (c)2002 ATI Technologies Inc.
Copyright (c)2002-2004 U.S. Digital Television, Inc.

 CLOCKS : xtal=24576KHz
          x=166MHz
          mips=264MHz
 FLASH  : #0=Samsung K9F2808U0
          #1=Samsung K9F2808U0
          #2=ST Microelectronics M25P10

Loading splash screen:
Reading 1 blocks from flash #0 to 0x83C00000...
.
1 blocks read.
Uncompressing...
Compressed size is 0x3A85 bytes
Original size is 0x12C000 bytes
Setting display to mode 1
Hardware: db2020

................................................
48 blocks read.
Uncompressing...
Compressed size is 0xBDCC2 bytes
Original size is 0x1CD000 bytes
8010046C(root=/dev/mtdblock1, ip=192.168.0.2, usdtvhw=db2020)

LINUX started...
ATI Xilleon 225 (little endian), Solo mode
AGP bus speed is 66MHz
Initializing IRQs
HZ=:100
mips_counter_frequency=:132185710
memsize environment variable not set: assuming 32MB
CPU revision is: 00018007
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 16kb, linesize 16 bytes (4 ways)
Linux version 2.4.18-15-USDTV (jimb@build-x225.fl.usdtv.com) (gcc version 2.96 20000731 (Red Hat L5Xilleon REG value before setting: PAD_USB1: 0xfc3, PAD_USB2: 0xfc3
Xilleon REG value after setting: PAD_USB1: 0xf43, PAD_USB2: 0xf43
Determined physical RAM map:
 memory: 00080000 @ 00000000 (ROM data)
 memory: 00080000 @ 00080000 (reserved)
 memory: 01f00000 @ 00100000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock1 ip=192.168.0.2 usdtvhw=db2020  console=ttyS0,115200,n,8,1
calculating r4koff... CPU frequency 264.37 MHz
Calibrating delay loop... 263.78 BogoMIPS
MIPS CPU counter frequency is fixed at 132185710 Hz
Memory: 29188k/31744k available (1661k kernel code, 2556k reserved, 87k data, 88k init, 0k highmem)Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
Autoconfig PCI channel 0x802cc5e8
Scanning bus 00, I/O 0x00002000:0x00010001, Mem 0x10000000:0x18000001
00:14.0 Class 0480: 1002:4855 (rev 03)
        Mem at 0x08000000 [size=0x4000000]
        I/O at 0x00002000 [size=0x100]
        Mem at 0x10000000 [size=0x8000]
        Mem at 0x1c000000 [size=0x2000000]
00:14.1 Class 0101: 1002:4856 (rev 02)
        I/O at 0x00002100 [size=0x8]
        I/O at 0x00002108 [size=0x4]
        I/O at 0x00002110 [size=0x8]
        I/O at 0x00002118 [size=0x4]
        I/O at 0x00002120 [size=0x10]
00:14.2 Class 0c03: 1002:4857 (rev 0b)
        Mem at 0x10008000 [size=0x1000]
00:14.5 Class 0401: 1002:4858 (rev 02)
        Mem at 0x10009000 [size=0x100]
00:14.6 Class 0703: 1002:4859 (rev 02)
        Mem at 0x10009100 [size=0x100]
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
initialize_kbd: Keyboard failed self test
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Testing ttyS0 (0xbe000010, 0xbe000010)...
Testing ttyS1 (0xbe000000, 0xbe000000)...
ttyS00 at 0xbe000010 (irq = 100) is a 16550A
ttyS01 at 0xbe000000 (irq = 99) is a 16550A
block: 64 slots per queue, batch=16
loop: loaded (max 8 devices)
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
STW NAND Flash initializing...
Reading pflash invalid block table 0 at block 0...
Reading pflash invalid block table 1 at block 1...
NAND device: Manufacturer ID: 0xec, Chip ID: 0x73 (Samsung NAND 16MiB 3,3V)
Creating 6 MTD partitions on "NAND 16MiB 3,3V":
0x00000000-0x00100000 : "MTD NAND partition 0 - boot area"
0x00100000-0x00e00000 : "MTD NAND partition 1 - root FS A"
0x00e00000-0x01000000 : "MTD NAND partition 2 - kernel area"
0x01000000-0x01100000 : "MTD NAND partition 3 - boot area B"
0x01100000-0x01e00000 : "MTD NAND partition 4 - root FS B"
0x01e00000-0x02000000 : "MTD NAND partition 5 - kernel area B"
STW NAND Flash devices initialization done.
usb.c: registered new driver hub
usb-ohci-pci.c: USB OHCI at membase 0xb0008000, IRQ 2
usb-ohci-pci.c: usb-00:14.2, PCI device 1002:4857
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
IP-Config: No network devices available.
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 381
FAT: bogus logical sector size 381
hub.c: USB new device connect on bus1/1, assigned device number 2
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Generic   Model: USB SD Reader     Rev: 2.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 59776 512-byte hdwr sectors (31 MB)
sda: Write Protect is off
Partition check:
 sda: sda1
Empty flash at 0x006298a0 ends at 0x00629a00
Empty flash at 0x007bd028 ends at 0x007bd200
Empty flash at 0x007bec40 ends at 0x007bee00
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 88k freed
Algorithmics/MIPS FPU Emulator v1.5
serial console detected.  Disabling virtual terminals.
init started:  BusyBox v0.60.0 (2002.02.05-18:03+0000) multi-call binary
Using /lib/modules/atifplib.o
Using /lib/modules/atyx220.o
Mon Jul 11 00:00:00 UTC 2005
Password: jffs2_get_inode_nodes(): CRC failed on node at 0x007bcfd0: Read 0xffffffff, calculated 0bEXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Diagnostics program found; verifying...
Running diagnostics...

Installing software version 2.7.15-HACK.

USDTV-MediaWorks Software
Copyright 2001-2005 U.S. Digital Television, Inc.  All Rights Reserved.


ATI Xilleon X225-A13    (Device ID: 4855   Revision: 3)

Aper  PhysBase  Size      VirtBase  AperBase  Access
00    18000000  00010000  2aacb000  2aacb000  MM
01    08000000  08000000  2ad70000  2ad70000  MM
02    1c000000  04000000  32d70000  32d70000  MM
03
  10008000  0000 **** buffer 0xb00
1000  2aae3000  2aae3000  MM
07    10009000  00000100  2aae4000  2aae4000  MM
08    10009100  00000100  2aae5000  2aae5100  MM
10    00002100  00000008  00002100  00002100  IO
11    00002108  00000004  00002108  00002108  IO
12    00002120  00000010  00002120  00002120  IO
21    1a000000  02000000  36d70000  36d70000  MM
22    10000000  00008000  2aadb000  2aadb000  MM


XCLK = 165 MHz
MCLK = 99 MHz
MIPS = 264 MHz

Memory Configuration: 32-bit 2-Channel DDR.
Channel 0 Size: 02000000 (32 MB)
Channel 1 Size: 02000000 (32 MB)
Total mem Size: 04000000 (64 MB)

Detecting theater...
Error: Rage theater/theater2 not found on VIP bus.
PMON memory size is 00000c00 (3KB)
OS memory start at  00100000 (1MB)
OS memory size is   01f00000 (31MB)

Core Version: 16.3.3.4
LLD Version:  16.3.3.4
HKD Version:  16.3.3.4

Core initialization completed.

MMDC client "mmfpanel_usdtv" connected

ATI Xilleon X225-A13    (Device ID: 4855   Revision: 3)

Aper  PhysBase  Size      VirtBase  AperBase  Access
00    18000000  00010000  2aacd000  2aacd000  MM
01    08000000  08000000  2b236000  2b236000  MM
03    10008000  00001000  2aae5000  2aae5000  MM
07    10009000  00000100  2aae6000  2aae6000  MM
08    10009100  00000100  2aae7000  2aae7100  MM
10    00002100  00000008  00002100  00002100  IO
11    00002108  00000004  00002108  00002108  IO
12    00002120  00000010  00002120  00002120  IO
22    10000000  00008000  2aadd000  2aadd000  MM


XCLK = 165 MHz
MCLK = 99 MHz
MIPS = 264 MHz

Memory Configuration: 32-bit 2-Channel DDR.
Channel 0 Size: 02000000 (32 MB)
Channel 1 Size: 02000000 (32 MB)
Total mem Size: 04000000 (64 MB)

Detecting theater...
Error: Rage theater/theater2 not found on VIP bus.

Core Version: 16.3.3.4
LLD Version:  16.3.3.4
HKD Version:  16.3.3.4

Core initialization completed.

MMDC client "mmprogress" connected
acl| FwIrqRetrievalThread (Queue entry 0x332e4958) started, Synchronization Mutex released
acl| AtiCore_NotificationMsgActivate(1, ATI_MSG_TYPE_INTERRUPT_OCCURRED) returns 0x0
acl| FwIrq_QueueCreate: Thread Synchronization Mutex 10 passed
acl| FwHkdCommunicationThread started, Synchronization Semaphore released
acl| AtiCore_NotificationMsgActivate(ATI_MSG_TYPE_FROM_HKD) returns 0x0
acl| FwHkdInit: Thread Synchronization Semaphore 12 passed
acl| Creating Message Event 0x1 for HKD Message Tag 0x1
acl| Waiting for the Message Event 0x1
acl| HkdCommunicationThread: AtiCore_NotificationMsgWait() returns a message 2 of length 8
acl| FwHkdCommunicationThread: FROM_HKD Message 0x88086421 (Tag = 0x1) received
acl| Signalling the Message Event 0x1
acl| Message Event 0x1 is received with coreResult = 0x0
acl| Deleting Message Event 0x1
acl| FwHkdInit() success
acl| Creating Message Event 0x1 for HKD Message Tag 0x2
acl| Waiting for the Message Event 0x1
acl| HkdCommunicationThread: AtiCore_NotificationMsgWait() returns a message 2 of length 12
acl| FwHkdCommunicationThread: FROM_HKD Message 0x90086662 (Tag = 0x2) received
acl| Signalling the Message Event 0x1
acl| Message Event 0x1 is received with coreResult = 0x0
acl| Deleting Message Event 0x1
acl| FwHkdGetTimestampingTimer() get Timer to be used 0x2970:0x296c
VidMem: ACLGfx Comm Offset = 0xc00 size = 0x2080
MMDC client "mmsay" connected
MMDC client "mmsay" connected
MMDC client "mmsay" connected

*************************************************
*  Now writing file system to /dev/mtd4.  *
*************************************************

MMDC client "mmsay" connected
Erasing 16 Kibyte @ cfc000 -- 99 % complete. Cleanmarker written at cfc000.
MMDC client "mmsay" connected
MMDC client "mmsay" connected
MMDC client "mmsay" connected
MMDC client "mmsay" connected
MMDC client "mmsay" connected
MMDC client "mmsay" connected

Hack your own - it's more fun...


BusyBox v0.60.0 (2002.02.05-18:03+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

# Password:
#
# ls
bin
dev
etc
lib
mnt
opt
proc
sbin
tmp
usr
var
# Password: xyzzy
xyzzy: not found
# Password: xyzzy
xyzzy: not found
# Password:
#
# ls
bin
dev
etc
lib
mnt
opt
proc
sbin
tmp
usr
var
# s -la
s: not found
# ls -la
drwxr-xr-x   14 0        0               0 Jan  1  1970 .
drwxr-xr-x   14 0        0               0 Jan  1  1970 ..
drwxr-xr-x    2 0        0               0 Feb  3  2006 bin
drwxr-xr-x    2 0        0               0 Oct 18  2003 dev
drwxr-xr-x    3 0        0               0 Feb  3  2006 etc
drwxr-xr-x    3 0        0               0 Feb  3  2006 lib
drwxr-xr-x    4 0        0               0 Oct 14  2003 mnt
drwxr-xr-x    3 0        0               0 Feb  3  2006 opt
dr-xr-xr-x   32 0        0               0 Jan  1  2003 proc
drwxr-xr-x    2 0        0               0 Feb  3  2006 sbin
drwxr-xr-x    2 0        0               0 Jul 11 00:00 tmp
drwxr-xr-x    5 0        0               0 Aug 19  2003 usr
drwxr-xr-x    3 0        0               0 Aug 19  2003 var
#