dmesg

OpenBSD 4.1 (RAMDISK_CD) #248: Sat Mar 10 19:32:46 MST 2007
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 2.20GHz ("GenuineIntel" 686-class) 2.19 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 2146988032 (2096668K)
avail mem = 1953828864 (1908036K)
using 4278 buffers containing 107474944 bytes (104956K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 01/30/03, BIOS32 rev. 0 @ 0xfaf30, SMBIOS rev. 2.3 @ 0xf0800 (63 entries)
bios0: IBM 6850xxx
apm0 at bios0: Power Management spec V1.2
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xec00 0xd0000/0x4800 0xd5000/0xb000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82860 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel 82850/82860 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA Quadro4 900 XGL" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 2 function 0 "Intel 82860 PCI-PCI" rev 0x04
pci2 at ppb1 bus 2
ppb2 at pci2 dev 31 function 0 "Intel 82806AA" rev 0x03
pci3 at ppb2 bus 3
"Intel 82806AA APIC" rev 0x01 at pci3 dev 0 function 0 not configured
ahc0 at pci3 dev 1 function 0 "Adaptec AIC-7899 U160" rev 0x01: irq 11
scsibus0 at ahc0: 16 targets
ahc0: target 0 using 8bit transfers
ahc0: target 0 using asynchronous transfers
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST336752LW !#, B843> SCSI3 0/direct fixed
sd0: 34715MB, 18496 cyl, 8 head, 480 sec, 512 bytes/sec, 71096640 sec total
ahc1 at pci3 dev 1 function 1 "Adaptec AIC-7899 U160" rev 0x01: irq 11
scsibus1 at ahc1: 16 targets
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x04
pci4 at ppb3 bus 4
fxp0 at pci4 dev 4 function 0 "Intel 8255x" rev 0x0c, i82550: irq 10, address 00:02:55:1a:96:70
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x04
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L120AVVA07-0>
wd0: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd1 at pciide0 channel 0 drive 1: <IC35L120AVVA07-0>
wd1: 16-sector PIO, LBA, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <MAD DOG, MD-16XDVD9, 2.FA> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x04: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
"Intel 82801BA AC97" rev 0x04 at pci0 dev 31 function 5 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fbe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 2, iclass 3/1
uhid at uhidev0 not configured
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd0 matches BIOS drive 0x82
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02