All pastes #593612 Raw Edit

Mine

public text v1 · immutable
#593612 ·published 2007-06-28 12:59 UTC
rendered paste body
[general]
context=default			; Default context for incoming calls
allowoverlap=no			; Disable overlap dialing support. (Default is yes)
bindport=5060			; UDP Port to bind to (SIP standard port is 5060)
bindaddr=0.0.0.0		; IP address to bind to (0.0.0.0 binds to all)
srvlookup=yes			; Enable DNS SRV lookups on outbound calls
qualify=30000000

externip=iphere		; Address that we're going to put in outbound SIP
localnet=192.168.1.0/255.255.255.0
;op school
;externip=
;localnet=10.0.0.0/255.255.255.0
nat=yes			; Global NAT settings  (Affects all peers and users)
canreinvite=no			; Asterisk by default tries to redirect the				
				; RTP media stream (audio) to go directly from
				; the caller to the callee.  Some devices do not
				; support this (especially if one of them is behind a NAT).
				; The default setting is YES. If you have all clients
				; behind a NAT, or for some other reason wants Asterisk to
				; stay in the audio path, you may want to turn this off.

				; In Asterisk 1.4 this setting also affect direct RTP
				; at call setup (a new feature in 1.4 - setting up the
				; call directly between the endpoints instead of sending
				; a re-INVITE).

;directrtpsetup=yes		; Enable the new experimental direct RTP setup. This sets up
				; the call directly with media peer-2-peer without re-invites.
				; Will not work for video and cases where the callee sends 
				; RTP payloads and fmtp headers in the 200 OK that does not match the
				; callers INVITE.

;canreinvite=nonat		; An additional option is to allow media path redirection
				; (reinvite) but only when the peer where the media is being
				; sent is known to not be behind a NAT (as the RTP core can
				; determine it based on the apparent IP address the media
				; arrives from).

;canreinvite=update,nonat	; Yet a third option... use UPDATE for media path redirection,
				; instead of INVITE. This can be combined with 'nonat', as
				; 'canreinvite=update,nonat'. It implies 'yes'.

[1234]
type=friend
auth=md5
username=1234
secret=
callerid="First Extension" <1234>
host=dynamic
nreinvite=no
canreinvite=no
disallow=all
allow=gsm
allow=ulaw
allow=alaw
nat=yes

[2345]
type=friend
auth=md5
username=2345
secret=
callerid="Second Extension" <2345>
host=dynamic
nreinvite=no
canreinvite=no
disallow=all
allow=gsm
allow=ulaw
allow=alaw
nat=yes