rendered paste body[ 0.000000] Bootdata ok (command line is root=/dev/hda1 ro quiet splash)
[ 0.000000] Linux version 2.6.15-20-amd64-generic (buildd@yellow) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 17:45:39 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 HP ) @ 0x00000000000f8080
[ 0.000000] ACPI: RSDT (v001 HP 3093 0x20041209 LTP 0x00000000) @ 0x000000001bef8bc5
[ 0.000000] ACPI: FADT (v001 HP 3093 0x20041209 PTL 0x0000005f) @ 0x000000001befee2a
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x20041209 LTP 0x00000001) @ 0x000000001befee9e
[ 0.000000] ACPI: MADT (v001 PTLTD 3093 0x20041209 LTP 0x00000000) @ 0x000000001befef74
[ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x20041209 LTP 0x00000000) @ 0x000000001befefc4
[ 0.000000] ACPI: DSDT (v001 HP 3091 0x20041209 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000001bef0000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000001bef0000
[ 0.000000] On node 0 totalpages: 111831
[ 0.000000] DMA zone: 3019 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 108812 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 2702000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda1 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 65536 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 1794.780 MHz processor.
[ 9.424491] Console: colour VGA+ 80x25
[ 9.425017] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 9.425418] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 9.433381] Memory: 439292k/457664k available (2130k kernel code, 17984k reserved, 750k data, 180k init)
[ 9.492534] Calibrating delay using timer specific routine.. 3595.00 BogoMIPS (lpj=1797503)
[ 9.492604] Security Framework v1.0.0 initialized
[ 9.492614] SELinux: Disabled at boot.
[ 9.492642] Mount-cache hash table entries: 256
[ 9.492789] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 9.492792] CPU: L2 Cache: 512K (64 bytes/line)
[ 9.492795] CPU 0(1) -> Node 0 -> Core 0
[ 9.492806] mtrr: v2.0 (20020519)
[ 9.492816] SMP alternatives: switching to UP code
[ 9.493308] checking if image is initramfs... it is
[ 10.112191] Freeing initrd memory: 7057k freed
[ 10.121298] ACPI: Looking for DSDT ... not found!
[ 10.135635] Using local APIC timer interrupts.
[ 10.191302] Detected 12.463 MHz APIC timer.
[ 10.191386] Brought up 1 CPUs
[ 10.191426] time.c: Using PIT/TSC based timekeeping.
[ 10.191428] testing NMI watchdog ... OK.
[ 10.201806] NET: Registered protocol family 16
[ 10.201835] ACPI: bus type pci registered
[ 10.201843] PCI: Using configuration type 1
[ 10.206413] PCI: Using MMCONFIG at e0000000
[ 10.207087] ACPI: Subsystem revision 20051216
[ 10.209022] ACPI: Interpreter enabled
[ 10.209025] ACPI: Using IOAPIC for interrupt routing
[ 10.209465] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.209468] PCI: Probing PCI hardware (bus 00)
[ 10.211571] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[ 10.211957] Boot video device is 0000:01:05.0
[ 10.212654] PCI: Transparent bridge - 0000:00:14.4
[ 10.212753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.215228] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 10.215456] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 10.215682] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 10.215921] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 10.216147] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 10.216381] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 10.216609] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 10.216846] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 10.217357] ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
[ 10.219282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 10.219552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 10.219943] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.219956] pnp: PnP ACPI init
[ 10.221684] pnp: PnP ACPI: found 10 devices
[ 10.221707] PCI: Using ACPI for IRQ routing
[ 10.221720] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.221879] PCI-DMA: Disabling IOMMU.
[ 10.222092] pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
[ 10.222096] pnp: 00:07: ioport range 0x220-0x22f has been reserved
[ 10.222099] pnp: 00:07: ioport range 0x40b-0x40b has been reserved
[ 10.222102] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 10.222300] PCI: Bridge: 0000:00:01.0
[ 10.222303] IO window: 9000-9fff
[ 10.222307] MEM window: d0100000-d01fffff
[ 10.222310] PREFETCH window: d4000000-d7ffffff
[ 10.222321] PCI: Bus 6, cardbus bridge: 0000:05:09.0
[ 10.222324] IO window: 0000a400-0000a4ff
[ 10.222330] IO window: 0000a800-0000a8ff
[ 10.222337] PREFETCH window: 30000000-31ffffff
[ 10.222344] MEM window: 32000000-33ffffff
[ 10.222349] PCI: Bridge: 0000:00:14.4
[ 10.222354] IO window: a000-afff
[ 10.222360] MEM window: d0200000-d02fffff
[ 10.222366] PREFETCH window: 30000000-31ffffff
[ 10.222408] GSI 16 sharing vector 0xB9 and IRQ 16
[ 10.222411] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185
[ 10.222420] PCI: Setting latency timer of device 0000:05:09.0 to 64
[ 10.222656] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 10.222975] audit: initializing netlink socket (disabled)
[ 10.222989] audit(1148735920.799:1): initialized
[ 10.223151] VFS: Disk quotas dquot_6.5.1
[ 10.223174] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 10.223235] Initializing Cryptographic API
[ 10.223240] io scheduler noop registered
[ 10.223249] io scheduler anticipatory registered
[ 10.223256] io scheduler deadline registered
[ 10.223272] io scheduler cfq registered
[ 10.237108] Linux agpgart interface v0.101 (c) Dave Jones
[ 10.237219] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 10.244163] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 10.244751] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 10.244786] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 10.246479] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
[ 10.246491] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 10.246858] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 10.246909] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 10.246915] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 10.246919] ACPI: bus type ide registered
[ 10.247188] mice: PS/2 mouse device common for all mice
[ 10.248442] NET: Registered protocol family 2
[ 10.258346] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 10.258542] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 10.258801] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 10.259071] TCP: Hash tables configured (established 16384 bind 16384)
[ 10.259074] TCP reno registered
[ 10.259173] TCP bic registered
[ 10.259182] NET: Registered protocol family 1
[ 10.259192] NET: Registered protocol family 8
[ 10.259194] NET: Registered protocol family 20
[ 10.259379] ACPI wakeup devices:
[ 10.259382] KBC0 MSE0 P2P AUDO
[ 10.259385] ACPI: (supports S0 S3 S4 S5)
[ 10.259452] Freeing unused kernel memory: 180k freed
[ 10.284712] input: AT Translated Set 2 keyboard as /class/input/input0
[ 10.305150] vga16fb: initializing
[ 10.305157] vga16fb: mapped to 0xffff8100000a0000
[ 10.395351] Console: switching to colour frame buffer device 80x25
[ 10.395356] fb0: VGA16 VGA frame buffer device
[ 11.458160] Capability LSM initialized
[ 11.486968] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 11.486975] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 11.581623] ACPI: Thermal Zone [THRM] (63 C)
[ 12.130550] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 12.130573] GSI 17 sharing vector 0xC1 and IRQ 17
[ 12.130577] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
[ 12.130590] ATIIXP: chipset revision 0
[ 12.130592] ATIIXP: not 100% native mode: will probe irqs later
[ 12.130615] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[ 12.130634] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[ 12.130643] Probing IDE interface ide0...
[ 12.394768] hda: IC25N060ATMR04-0, ATA DISK drive
[ 13.005944] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 13.006109] Probing IDE interface ide1...
[ 13.677351] hdc: HL-DT-ST DVD-RW GWA-4082N, ATAPI CD/DVD-ROM drive
[ 13.983474] ide1 at 0x170-0x177,0x376 on irq 15
[ 13.991514] hda: max request size: 1024KiB
[ 14.011796] hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
[ 14.012161] hda: cache flushes supported
[ 14.012309] hda: hda1 hda3 < hda5 hda6 > hda4
[ 14.091127] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA
[ 14.091136] Uniform CD-ROM driver Revision: 3.20
[ 14.463704] usbcore: registered new driver usbfs
[ 14.464082] usbcore: registered new driver hub
[ 14.466333] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 14.467000] GSI 18 sharing vector 0xC9 and IRQ 18
[ 14.467004] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
[ 14.467184] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 14.830163] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 14.830177] ohci_hcd 0000:00:13.0: irq 201, io mem 0xd0000000
[ 14.857110] ieee1394: Initialized config rom entry `ip1394'
[ 14.884700] hub 1-0:1.0: USB hub found
[ 14.884716] hub 1-0:1.0: 4 ports detected
[ 14.985623] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
[ 14.985800] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 15.312304] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 15.312312] ohci_hcd 0000:00:13.1: irq 201, io mem 0xd0001000
[ 15.367323] hub 2-0:1.0: USB hub found
[ 15.367336] hub 2-0:1.0: 4 ports detected
[ 15.469837] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
[ 15.470179] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 15.470459] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 15.470468] ehci_hcd 0000:00:13.2: irq 201, io mem 0xd0002000
[ 15.470483] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.470771] hub 3-0:1.0: USB hub found
[ 15.470780] hub 3-0:1.0: 8 ports detected
[ 15.571754] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[ 15.571786] GSI 19 sharing vector 0xD1 and IRQ 19
[ 15.571790] ACPI: PCI Interrupt 0000:05:09.2[C] -> GSI 22 (level, low) -> IRQ 209
[ 15.622374] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[d0208800-d0208fff] Max Packet=[2048]
[ 15.875874] Attempting manual resume
[ 15.947986] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.965784] kjournald starting. Commit interval 5 seconds
[ 15.970379] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 24.128268] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.143494] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.626941] 8139too Fast Ethernet driver 0.9.27
[ 24.627002] GSI 20 sharing vector 0xD9 and IRQ 20
[ 24.627007] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 217
[ 24.628094] eth0: RealTek RTL8139 at 0xffffc20000070000, 00:16:36:0e:8e:77, IRQ 217
[ 24.628099] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 24.669206] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[ 24.705689] Real Time Clock Driver v1.12
[ 24.771468] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
[ 24.793308] input: PC Speaker as /class/input/input1
[ 24.872578] MC'97 0 converters and GPIO not ready (0x1)
[ 24.884221] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
[ 25.008929] usbcore: registered new driver hiddev
[ 25.016933] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 25.016967] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1
[ 25.016978] usbcore: registered new driver usbhid
[ 25.016982] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 25.125322] ieee80211_crypt: registered algorithm 'NULL'
[ 25.127052] ieee80211: 802.11 data/management/control stack, git-1.1.7
[ 25.127055] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 25.212780] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185
[ 25.212796] Yenta: CardBus bridge found at 0000:05:09.0 [103c:3091]
[ 25.212821] Yenta: Enabling burst memory read transactions
[ 25.212828] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 25.212830] Yenta: Routing CardBus interrupts to PCI
[ 25.212837] Yenta TI: socket 0000:05:09.0, mfunc 0x01a01b22, devctl 0x64
[ 25.247056] sdhci: Secure Digital Host Controller Interface driver, 0.10
[ 25.247061] sdhci: Copyright(c) Pierre Ossman
[ 25.435824] Yenta: ISA IRQ mask 0x0ee8, PCI irq 185
[ 25.435830] Socket status: 30000006
[ 25.435834] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 25.435838] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[ 25.435841] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[ 25.439268] ACPI: PCI Interrupt 0000:05:09.4[A] -> GSI 17 (level, low) -> IRQ 185
[ 25.489419] sdhci: ============== REGISTER DUMP ==============
[ 25.489428] sdhci: Sys addr: 0x00000000 | Version: 0x00008400
[ 25.489434] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 25.489440] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 25.489446] sdhci: Present: 0x00020000 | Host ctl: 0x00000000
[ 25.489451] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 25.489457] sdhci: Walk up: 0x00000000 | Clock: 0x00000002
[ 25.489463] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[ 25.489469] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[ 25.489475] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 25.489481] sdhci: Caps: 0x01821090 | Max curr: 0x00000000
[ 25.489483] sdhci: ===========================================
[ 25.539580] mmc0: SDHCI at 0xd0209400 irq 185 DMA
[ 25.639060] sdhci: ============== REGISTER DUMP ==============
[ 25.639069] sdhci: Sys addr: 0x00000000 | Version: 0x00008400
[ 25.639075] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 25.639081] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 25.639087] sdhci: Present: 0x00020000 | Host ctl: 0x00000000
[ 25.639092] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 25.639098] sdhci: Walk up: 0x00000000 | Clock: 0x00000002
[ 25.639104] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[ 25.639110] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[ 25.639116] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 25.639122] sdhci: Caps: 0x01821090 | Max curr: 0x00000000
[ 25.639124] sdhci: ===========================================
[ 25.689201] mmc1: SDHCI at 0xd0209000 irq 185 DMA
[ 25.788792] sdhci: ============== REGISTER DUMP ==============
[ 25.788801] sdhci: Sys addr: 0x00000000 | Version: 0x00008400
[ 25.788806] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 25.788812] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 25.788818] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000
[ 25.788824] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 25.788829] sdhci: Walk up: 0x00000000 | Clock: 0x00000002
[ 25.788835] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[ 25.788842] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[ 25.788847] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 25.788853] sdhci: Caps: 0x01821898 | Max curr: 0x00000000
[ 25.788855] sdhci: ===========================================
[ 25.838944] mmc2: SDHCI at 0xd0208400 irq 185 DMA
[ 25.917777] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[ 25.952235] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 26.587978] bcm43xx: driver
[ 26.588069] GSI 22 sharing vector 0xE1 and IRQ 22
[ 26.588074] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 225
[ 26.718743] ts: Compaq touchscreen protocol output
[ 26.819787] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 27.380174] lp: driver loaded but no devices found
[ 27.432918] SCSI subsystem initialized
[ 27.452227] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[ 27.452232] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 27.452234] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 27.512545] Adding 1502068k swap on /dev/hda4. Priority:-1 extents:1 across:1502068k
[ 27.623809] EXT3 FS on hda1, internal journal
[ 27.810286] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 27.810291] md: bitmap version 4.39
[ 27.865811] NET: Registered protocol family 17
[ 28.570962] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 29.094164] cdrom: open failed.
[ 29.604316] kjournald starting. Commit interval 5 seconds
[ 29.604524] EXT3 FS on hda5, internal journal
[ 29.604529] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.651880] kjournald starting. Commit interval 5 seconds
[ 29.652089] EXT3 FS on hda6, internal journal
[ 29.652094] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.523174] ACPI: AC Adapter [ACAD] (on-line)
[ 36.600183] ACPI: Battery Slot [BAT1] (battery present)
[ 36.956869] ACPI: Power Button (FF) [PWRF]
[ 36.956880] ACPI: Power Button (CM) [PWRB]
[ 36.956885] ACPI: Sleep Button (CM) [SLPB]
[ 36.956893] ACPI: Lid Switch [LID]
[ 37.213994] ibm_acpi: ec object not found
[ 37.399556] pcc_acpi: loading...
[ 37.554252] wmi_add device=ffff81001bded000
[ 37.554256] calling WQBA
[ 37.835497] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 38.317315] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[ 38.317354] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x4 (1450 mV)
[ 38.317358] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x6 (1400 mV)
[ 38.317361] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x16 (1000 mV)
[ 38.317366] cpu_init done, current fid 0xa, vid 0x4
[ 44.438493] ppdev: user-space parallel port driver
[ 45.829425] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 45.832089] [fglrx] Maximum main memory to use for locked dma buffers: 369 MBytes.
[ 45.832749] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 185
[ 45.833193] [fglrx] module loaded - fglrx 8.23.7 [Mar 6 2006] on minor 0
[ 47.549273] [fglrx:firegl_unlock] *ERROR* Process 4447 using kernel context 0
[ 47.595476] Bluetooth: Core ver 2.8
[ 47.595482] NET: Registered protocol family 31
[ 47.595485] Bluetooth: HCI device and connection manager initialized
[ 47.595498] Bluetooth: HCI socket layer initialized
[ 47.684013] Bluetooth: L2CAP ver 2.8
[ 47.684017] Bluetooth: L2CAP socket layer initialized
[ 47.688084] Bluetooth: RFCOMM socket layer initialized
[ 47.688104] Bluetooth: RFCOMM TTY layer initialized
[ 47.688106] Bluetooth: RFCOMM ver 1.7
[ 75.702098] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 97.100533] ACPI: PCI interrupt for device 0000:05:02.0 disabled
[ 103.462441] bcm43xx: driver
[ 103.463120] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 225
[ 113.220115] Losing some ticks... checking if CPU frequency changed.
[ 132.710400] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 136.806848] NET: Registered protocol family 10
[ 136.806954] lo: Disabled Privacy Extensions
[ 136.807050] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 136.807076] IPv6 over IPv4 tunneling driver
[ 141.331772] eth0: no IPv6 routers present
[ 147.040539] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 153.707842] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 180.338361] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 208.541021] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 235.171055] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 261.815604] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 288.445625] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 315.090569] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 342.721116] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 369.365661] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 395.995691] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 422.640219] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 449.270508] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 475.914807] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 502.544831] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 529.189364] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 555.819418] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 582.463955] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 609.094000] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 635.738537] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 662.368587] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 689.013120] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 715.643167] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 742.287709] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 768.917750] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 795.562729] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 822.192775] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 848.837317] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 875.467359] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 902.111896] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 928.741943] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 955.386482] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 982.016525] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1008.661066] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1035.291112] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1061.936096] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1088.566140] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1115.210688] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1141.840723] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1168.485261] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1195.115311] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1221.759848] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1248.389889] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1275.034431] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1301.664483] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1328.309019] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1354.939061] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1381.583603] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1408.213651] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1434.858196] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1461.488232] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1488.132769] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1514.762817] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1541.407363] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 1546.269392] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[ 1546.284667] ACPI: PCI interrupt for device 0000:05:02.0 disabled
[ 1546.290199] ieee80211_crypt: unregistered algorithm 'NULL'
[ 1547.876674] usb 2-1: USB disconnect, address 2
[ 1548.280724] Freezing cpus ...
[ 1548.280934] Stopping tasks: =======================================================================================|
[ 1548.281722] Shrinking memory... -\|/-\done (68149 pages freed)
[ 1552.145618] GTM info 78,78,78,78,1a
[ 1560.485469] GTM info 78,14,258,3c0,1b
[ 1560.485949] ACPI: PCI interrupt for device 0000:05:09.0 disabled
[ 1560.486015] [fglrx:drm_alloc] *ERROR* [buflist] Allocating 0 bytes
[ 1560.501162] ACPI: PCI interrupt for device 0000:01:05.0 disabled
[ 1560.501375] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 1560.501642] ACPI: PCI interrupt for device 0000:00:14.5 disabled
[ 1560.501787] ACPI: PCI interrupt for device 0000:00:13.2 disabled
[ 1560.511188] ACPI: PCI interrupt for device 0000:00:13.1 disabled
[ 1560.511224] ACPI: PCI interrupt for device 0000:00:13.0 disabled
[ 1560.527539] swsusp: Need to copy 40563 pages
[ 27.933912] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
[ 27.933948] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
[ 27.943248] PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
[ 27.943253] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
[ 27.943321] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 27.943373] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
[ 27.943454] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
[ 27.945147] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
[ 27.945644] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 185
[ 27.945691] [fglrx:drm_free] *ERROR* [buflist] Attempt to free NULL pointer
[ 27.945791] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185
[ 27.945986] ACPI: PCI Interrupt 0000:05:09.2[C] -> GSI 22 (level, low) -> IRQ 209
[ 27.946050] ACPI: PCI Interrupt 0000:05:09.4[A] -> GSI 17 (level, low) -> IRQ 185
[ 28.449610] Start STM
[ 28.450473] start GTF
[ 28.450475] data 3,c,0,0,0,a0,ef
[ 28.450478] data 3,45,0,0,0,a0,ef
[ 28.457169] Start STM
[ 28.458033] start GTF
[ 28.458035] data 3,c,0,0,0,a0,ef
[ 28.458037] data 3,22,0,0,0,a0,ef
[ 28.576322] Restarting tasks... done
[ 28.577245] Thawing cpus ...
[ 36.402999] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 36.403006] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 36.403009] ide: failed opcode was: 0xec
[ 37.110734] 8139too Fast Ethernet driver 0.9.27
[ 37.110936] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 217
[ 37.111524] eth0: RealTek RTL8139 at 0xffffc20000070000, 00:16:36:0e:8e:77, IRQ 217
[ 37.111732] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 37.370264] ieee80211_crypt: registered algorithm 'NULL'
[ 37.376707] ieee80211: 802.11 data/management/control stack, git-1.1.7
[ 37.376899] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 37.533845] bcm43xx: driver
[ 37.534449] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 225
[ 39.253707] eth0: link down
[ 39.253931] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.779796] ACPI: Power Button (FF) [PWRF]
[ 39.780001] ACPI: Power Button (CM) [PWRB]
[ 39.780119] ACPI: Sleep Button (CM) [SLPB]
[ 39.780226] ACPI: Lid Switch [LID]
[ 39.824426] ACPI: Thermal Zone [THRM] (30 C)
[ 39.876566] ACPI: AC Adapter [ACAD] (off-line)
[ 39.932676] ACPI: Battery Slot [BAT1] (battery present)
[ 54.174067] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 54.182273] bcm43xx: FATAL ERROR: BCM43xx_IRQ_XMIT_ERROR
[ 67.267530] ACPI: PCI interrupt for device 0000:05:02.0 disabled
[ 1572.275575] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[ 1574.257353] Freezing cpus ...
[ 1574.257542] Stopping tasks: ==========================================================================================================|
[ 1574.258356] Shrinking memory... -\|/-done (55905 pages freed)
[ 1581.586377] GTM info 78,78,78,78,1a
[ 1581.778113] GTM info 78,14,258,1e0,1b
[ 1581.778564] ACPI: PCI interrupt for device 0000:05:09.0 disabled
[ 1581.778628] [fglrx:drm_alloc] *ERROR* [buflist] Allocating 0 bytes
[ 1581.793962] ACPI: PCI interrupt for device 0000:01:05.0 disabled
[ 1581.794172] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 1581.794445] ACPI: PCI interrupt for device 0000:00:14.5 disabled
[ 1581.794587] ACPI: PCI interrupt for device 0000:00:13.2 disabled
[ 1581.803771] ACPI: PCI interrupt for device 0000:00:13.1 disabled
[ 1581.803806] ACPI: PCI interrupt for device 0000:00:13.0 disabled
[ 1581.820830] swsusp: Need to copy 46183 pages
[ 29.845564] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 201
[ 29.845602] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 201
[ 29.855334] PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
[ 29.855339] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 201
[ 29.855430] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
[ 29.855511] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 185
[ 29.857202] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 185
[ 29.857698] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 185
[ 29.857745] [fglrx:drm_free] *ERROR* [buflist] Attempt to free NULL pointer
[ 29.857752] [fglrx:drm_free] *ERROR* [buflist] Excess frees: 2 frees, 1 allocs
[ 29.857850] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 17 (level, low) -> IRQ 185
[ 29.858045] ACPI: PCI Interrupt 0000:05:09.2[C] -> GSI 22 (level, low) -> IRQ 209
[ 29.858110] ACPI: PCI Interrupt 0000:05:09.4[A] -> GSI 17 (level, low) -> IRQ 185
[ 30.361733] Start STM
[ 30.362631] start GTF
[ 30.362634] data 3,c,0,0,0,a0,ef
[ 30.362636] data 3,45,0,0,0,a0,ef
[ 30.368971] Start STM
[ 30.369884] start GTF
[ 30.369887] data 3,c,0,0,0,a0,ef
[ 30.369889] data 3,22,0,0,0,a0,ef
[ 30.506166] Restarting tasks... done
[ 30.508675] Thawing cpus ...
[ 30.606504] usb 2-1: new low speed USB device using ohci_hcd and address 3
[ 30.741570] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
[ 30.741617] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1
[ 36.527621] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 36.527628] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 36.527631] ide: failed opcode was: 0xec
[ 38.037220] 8139too Fast Ethernet driver 0.9.27
[ 38.037939] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 217
[ 38.039340] eth0: RealTek RTL8139 at 0xffffc20000070000, 00:16:36:0e:8e:77, IRQ 217
[ 38.039820] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 39.056466] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 40.350992] ACPI: Power Button (FF) [PWRF]
[ 40.351322] ACPI: Power Button (CM) [PWRB]
[ 40.351605] ACPI: Sleep Button (CM) [SLPB]
[ 40.351868] ACPI: Lid Switch [LID]
[ 40.535801] ACPI: Thermal Zone [THRM] (28 C)
[ 40.630377] ACPI: AC Adapter [ACAD] (on-line)
[ 40.703233] ACPI: Battery Slot [BAT1] (battery present)
[ 43.878869] eth0: no IPv6 routers present