rendered paste bodyUsing PowerMac machine description
Total memory = 512MB; using 1024kB for hash table (at cff00000)
Linux version 2.6.21-1.3194.fc7 (kojibuilder@ppc1.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 Wed May 23 22:12:25 EDT 2007
Found initrd at 0xc1a00000:0xc1d41000
Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
Mapped at 0xfdfc0000
Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
Processor NAP mode on idle enabled.
PowerMac motherboard: iBook G4
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
Entering add_active_range(0, 0, 131072) 0 entries of 256 used
Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
nvram: Checking bank 0...
nvram: gen0=838, gen1=839
nvram: Active bank is: 1
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x20000000, Total RAM: 0x20000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0 -> 131072
Normal 131072 -> 131072
HighMem 131072 -> 131072
early_node_map[1] active PFN ranges
0: 0 -> 131072
On node 0 totalpages: 131072
DMA zone: 1024 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 130048 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
HighMem zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 130048
Kernel command line: ro root=LABEL=/
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 64, shift: 6, mask: 3f
mpic: Initializing for 64 sources
PID hash table entries: 2048 (order: 11, 8192 bytes)
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 18.432000 MHz
time_init: processor frequency = 1066.666664 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
High memory: 0k
Memory: 510336k/524288k available (3884k kernel code, 13432k reserved, 144k data, 338k bss, 208k init)
Calibrating delay loop... 36.73 BogoMIPS (lpj=18368)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
NET: Registered protocol family 16
KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
channel 0 bus <multibus>
PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 0 of device 0001:10:18.0
PCI: Cannot allocate resource region 0 of device 0001:10:19.0
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
mpc52xx-bestcomm: could not locate DMA controller
DMA: MPC52xx BestComm init FAILED !!!
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 3332k freed
Thermal assist unit not available
Registering PowerMac CPU frequency driver
Low: 533 Mhz, High: 1066 Mhz, Boot: 533 Mhz
audit: initializing netlink socket (disabled)
audit(2212125635.954:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Enabling device 0000:00:10.0 (0006 -> 0007)
radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
radeonfb: Retrieved PLL infos from Open Firmware
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-2: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type LCD found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 128x48
radeonfb: Backlight initialized (radeonbl0)
radeonfb (0000:00:10.0): ATI Radeon \c
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected Apple UniNorth 2 chipset
agpgart: configuring for size idx: 8
agpgart: AGP aperture is 32M @ 0x0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Serial: MPC52xx PSC UART driver
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
MacIO PCI driver attached to Intrepid chipset
input: Macintosh mouse button emulation as /class/input/input0
apm_emu: APM Emulation 0.5 initialized.
adb: starting probe task...
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI: Enabling device 0002:20:0d.0 (0000 -> 0002)
adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
ADB keyboard at 2, handler 1
Detected ADB keyboard, type ANSI.
input: ADB keyboard as /class/input/input1
input: ADB Powerbook buttons as /class/input/input2
ADB mouse at 3, handler set to 4 (trackpad)
input: ADB mouse as /class/input/input3
adb: finished probe task...
ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
Probing IDE interface ide0...
hda: FUJITSU MHT2030AT, ATA DISK drive
hda: Enabling Ultra DMA 5
ide0 at 0xe102a000-0xe102a007,0xe102a160 on irq 39
ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
Probing IDE interface ide1...
hdc: QSI CD-ROM TCR-241, ATAPI CD/DVD-ROM drive
hdc: Enabling MultiWord DMA 2
ide1 at 0xe1014000-0xe1014007,0xe1014160 on irq 24
hda: max request size: 512KiB
hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: [mac] hda1 hda2 hda3 hda4 hda5
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus uni-n 1 registered
PowerMac i2c bus uni-n 0 registered
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
input: PMU as /class/input/input4
Registered led device: pmu-front-led
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 208k init
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
ohci_hcd 0001:10:1a.0: OHCI Host Controller
ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
ohci_hcd 0001:10:1b.0: OHCI Host Controller
ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
ohci_hcd 0001:10:1b.1: OHCI Host Controller
ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
ehci_hcd 0001:10:1b.2: EHCI Host Controller
ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4
ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(2212125645.452:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
security: 60 classes, 65638 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hda3, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(2212125646.462:3): policy loaded auid=4294967295
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
PHY ID: 4061e4, addr: 0
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:c2:6b:04
eth0: Found BCM5221 PHY
PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
fw_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
fw_core: created new fw device fw0 (0 config rom retries)
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
hdc: ATAPI 24X CD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
input: PowerMac Beep as /class/input/input5
loop: loaded (max 8 devices)
lp: driver loaded but no devices found
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on hda3, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (4096 buckets, 32768 max)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ADDRCONF(NETDEV_UP): eth0: link is not ready
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SCSI subsystem initialized
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
bcm43xx driver
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Link is up at 100 Mbps, full-duplex.
eth0: Pause is disabled
eth0: no IPv6 routers present