Jump to Flash
Head : Amazon Version 1.0.0
DRAM: 16 MB
Head : relocate_code start
Head: relocate code finish.
Image Name: u-boot image
Image Type: MIPS Linux Firmware (lzma compressed)
Data Size: 38635 Bytes = 37.7 kB
Load Address: 80100000
Entry Point: 80100000
Disabling all the interrupts
Uncompressing UBoot Image ...
Uncompression completed successfully with destLen 116328.
Head: Jumping to u-boot in the ram at 0x80100000
Infineon Amazon
U-Boot 2.0.18-M416 (Oct 30 2006 - 18:36:01)
In env_init : env_ptr = 0xb33f7000
Recovery process also failed.
For enviornment CRC32 is NOT OK
Board: AMAZON Yangtse Version, Chip V1.3, CPU Speed 235 MHz
DRAM: 16 MB
relocate_code start
relocate code finish
Entering flash_init()
flash_get_size
type is 0000007f
type is 000000f9
unknown flash id 0x7fflash get offsets fail
## Unknown FLASH on Bank 0 - Size = 0x00000000
Flash: 0 kB
env_relocate[224] malloced ENV at 80abf408
Using default environment
Initialize devices...
In: serial
Out: serial
Err: serial
Net: AMAZON Switch
Type "run flash_nfs" to mount root filesystem over NFS
Press enter key to stop autoboot: 0
## Booting image at b33f4fff ...
Bad Magic Number
AMAZON #