rendered paste bodylocalhost joost # dmesg
[ 0.000000] Linux version 2.6.20-sabayon-r3 (root@lxnaydesign.net) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Sat Mar 24 17:19:06 UTC 2007
[ 0.000000] Command line: dolvm2 root=/dev/ram0 ramdisk=8192 real_root=/dev/VolGroup00/LogVol00 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1 dodmraid pci=nomsi resume2=swap:/dev/mapper/VolGroup00-LogVol01
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003df00000 (usable)
[ 0.000000] BIOS-e820: 000000003df00000 - 000000003df17000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003df17000 - 000000003df80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003df80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 253696) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 HP ) @ 0x00000000000f89a0
[ 0.000000] ACPI: RSDT (v001 HP RSDT 0x06040000 LTP 0x00000000) @ 0x000000003df0fb99
[ 0.000000] ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @ 0x000000003df16d52
[ 0.000000] ACPI: SSDT (v001 HP POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003df16dc6
[ 0.000000] ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0x000000003df16f48
[ 0.000000] ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0x000000003df16f84
[ 0.000000] ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003df16fd8
[ 0.000000] ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003df00000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 253696) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003df00000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 253696
[ 0.000000] On node 0 totalpages: 253597
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2616 pages reserved
[ 0.000000] DMA zone: 1325 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3412 pages used for memmap
[ 0.000000] DMA32 zone: 246188 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009d000 - 000000000009e000
[ 0.000000] Nosave address range: 000000000009e000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000d2000
[ 0.000000] Nosave address range: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34432 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 247513
[ 0.000000] Kernel command line: dolvm2 root=/dev/ram0 ramdisk=8192 real_root=/dev/VolGroup00/LogVol00 quiet init=/linuxrc splash=silent,theme:sabayon vga=791 CONSOLE=/dev/tty1 dodmraid pci=nomsi resume2=swap:/dev/mapper/VolGroup00-LogVol01
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 17.296469] Console: colour dummy device 80x25
[ 17.297430] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 17.298779] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 17.299324] Checking aperture...
[ 17.299329] CPU 0: aperture @ 180000000 size 32 MB
[ 17.299332] Aperture too small (32 MB)
[ 17.306456] No AGP bridge found
[ 17.318855] Memory: 983736k/1014784k available (6147k kernel code, 30652k reserved, 2912k data, 392k init)
[ 17.378395] Calibrating delay using timer specific routine.. 3216.44 BogoMIPS (lpj=1608223)
[ 17.378465] Security Framework v1.0.0 initialized
[ 17.378472] SELinux: Initializing.
[ 17.378494] SELinux: Starting in permissive mode
[ 17.378500] selinux_register_security: Registering secondary module capability
[ 17.378503] Capability LSM initialized as secondary
[ 17.378534] Mount-cache hash table entries: 256
[ 17.378700] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.378703] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.378707] CPU 0/0 -> Node 0
[ 17.378709] CPU: Physical Processor ID: 0
[ 17.378711] CPU: Processor Core ID: 0
[ 17.378743] SMP alternatives: switching to UP code
[ 17.379065] ACPI: Core revision 20060707
[ 17.399372] Using local APIC timer interrupts.
[ 17.461584] result 12557506
[ 17.461586] Detected 12.557 MHz APIC timer.
[ 17.462626] SMP alternatives: switching to SMP code
[ 17.462919] Booting processor 1/2 APIC 0x1
[ 17.473987] Initializing CPU#1
[ 17.534154] Calibrating delay using timer specific routine.. 3214.17 BogoMIPS (lpj=1607088)
[ 17.534162] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 17.534165] CPU: L2 Cache: 256K (64 bytes/line)
[ 17.534169] CPU 1/1 -> Node 0
[ 17.534171] CPU: Physical Processor ID: 0
[ 17.534173] CPU: Processor Core ID: 1
[ 17.534245] AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 17.535175] CPU 1: Syncing TSC to CPU 0.
[ 17.534478] CPU 1: synchronized TSC with CPU 0 (last diff -6 cycles, maxerr 475 cycles)
[ 17.534493] Brought up 2 CPUs
[ 17.534590] testing NMI watchdog ... OK.
[ 17.544600] Disabling vsyscall due to use of PM timer
[ 17.544604] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 17.544607] time.c: Detected 1607.359 MHz processor.
[ 18.529858] migration_cost=132
[ 18.530276] NET: Registered protocol family 16
[ 18.530476] No dock devices found.
[ 18.530484] ACPI: bus type pci registered
[ 18.534284] PCI: Using MMCONFIG at e0000000
[ 18.534315] PCI: No mmconfig possible on device 00:18
[ 18.534503] PCI: No mmconfig possible on device 07:05
[ 18.543852] ACPI: Interpreter enabled
[ 18.543857] ACPI: Using IOAPIC for interrupt routing
[ 18.545049] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.545060] PCI: Probing PCI hardware (bus 00)
[ 18.545281] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 18.545614] Boot video device is 0000:00:05.0
[ 18.546583] PCI: Transparent bridge - 0000:00:10.0
[ 18.546615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.588358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 18.589994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 18.590248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 18.590771] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 18.591234] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
[ 18.591688] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
[ 18.592144] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 18.592604] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 18.593066] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 18.593523] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *11
[ 18.593977] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 18.594437] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
[ 18.594890] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10
[ 18.595352] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 18.595811] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
[ 18.596275] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10
[ 18.596729] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 18.597189] ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 18.597648] ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 18.598106] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 18.598574] ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
[ 18.599036] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
[ 18.599209] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.599224] pnp: PnP ACPI init
[ 18.602091] pnp: PnP ACPI: found 11 devices
[ 18.602350] SCSI subsystem initialized
[ 18.602402] libata version 2.00 loaded.
[ 18.602497] usbcore: registered new interface driver usbfs
[ 18.602540] usbcore: registered new interface driver hub
[ 18.602593] usbcore: registered new device driver usb
[ 18.602647] PCI: Using ACPI for IRQ routing
[ 18.602651] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.602760] NetLabel: Initializing
[ 18.602763] NetLabel: domain hash size = 128
[ 18.602765] NetLabel: protocols = UNLABELED CIPSOv4
[ 18.602782] NetLabel: unlabeled traffic allowed by default
[ 18.603825] pnp: 00:03: ioport range 0x1000-0x107f could not be reserved
[ 18.603830] pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
[ 18.603834] pnp: 00:03: ioport range 0x1400-0x147f has been reserved
[ 18.603838] pnp: 00:03: ioport range 0x1480-0x14ff could not be reserved
[ 18.603842] pnp: 00:03: ioport range 0x1800-0x187f has been reserved
[ 18.603846] pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
[ 18.603850] pnp: 00:03: ioport range 0x2000-0x203f has been reserved
[ 18.603887] ieee1394: Initialized config rom entry `ip1394'
[ 18.604521] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 18.604532] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 11 (level, high) -> IRQ 11
[ 18.656897] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[b3400000-b34007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 18.661025] PCI: Bridge: 0000:00:02.0
[ 18.661029] IO window: 4000-4fff
[ 18.661033] MEM window: b3000000-b31fffff
[ 18.661036] PREFETCH window: d0000000-d01fffff
[ 18.661040] PCI: Bridge: 0000:00:03.0
[ 18.661042] IO window: disabled.
[ 18.661045] MEM window: b3200000-b33fffff
[ 18.661048] PREFETCH window: disabled.
[ 18.661052] PCI: Bridge: 0000:00:10.0
[ 18.661054] IO window: disabled.
[ 18.661058] MEM window: b3400000-b34fffff
[ 18.661061] PREFETCH window: disabled.
[ 18.661071] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 18.661078] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 18.661086] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 18.661187] NET: Registered protocol family 2
[ 18.673104] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 18.673432] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 18.675010] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 18.675788] TCP: Hash tables configured (established 131072 bind 65536)
[ 18.675792] TCP reno registered
[ 18.680199] checking if image is initramfs... it is
[ 18.985833] Freeing initrd memory: 4158k freed
[ 18.988742] Simple Boot Flag at 0x36 set to 0x1
[ 18.989693] audit: initializing netlink socket (disabled)
[ 18.989710] audit(1182559600.628:1): initialized
[ 18.989803] Total HugeTLB memory allocated, 0
[ 18.989956] VFS: Disk quotas dquot_6.5.1
[ 18.989982] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 18.990147] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 18.990174] Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
[ 18.990512] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.990861] NTFS driver 2.1.28 [Flags: R/W].
[ 18.990940] QNX4 filesystem 0.2.3 registered.
[ 18.990943] fuse init (API version 7.8)
[ 18.991087] JFS: nTxBlock = 7717, nTxLock = 61743
[ 18.994936] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 18.995247] SGI XFS Quota Management subsystem
[ 18.995437] GFS2 (built Mar 24 2007 17:14:48) installed
[ 18.995484] SELinux: Registering netfilter hooks
[ 19.006002] io scheduler noop registered
[ 19.006005] io scheduler anticipatory registered
[ 19.006008] io scheduler deadline registered
[ 19.006032] io scheduler cfq registered (default)
[ 19.210172] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 19.210191] assign_interrupt_mode Found MSI capability
[ 19.210195] Allocate Port Service[0000:00:02.0:pcie00]
[ 19.210244] Allocate Port Service[0000:00:02.0:pcie03]
[ 19.210310] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 19.210326] assign_interrupt_mode Found MSI capability
[ 19.210330] Allocate Port Service[0000:00:03.0:pcie00]
[ 19.210372] Allocate Port Service[0000:00:03.0:pcie03]
[ 19.266432] lp: driver loaded but no devices found
[ 19.266549] Real Time Clock Driver v1.12ac
[ 19.273390] ppdev: user-space parallel port driver
[ 19.273396] Linux agpgart interface v0.101 (c) Dave Jones
[ 19.273582] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010600000, using 3072k, total 32768k
[ 19.273587] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 19.273590] vesafb: scrolling: redraw
[ 19.273593] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 19.300825] Console: switching to colour frame buffer device 128x48
[ 19.327393] fbsplash: console 0 using theme 'sabayon'
[ 19.648564] fbsplash: switched splash state to 'on' on console 0
[ 19.649037] fb0: VESA VGA frame buffer device
[ 19.649612] ACPI: AC Adapter [ACAD] (on-line)
[ 19.656772] ACPI: Battery Slot [BAT0] (battery present)
[ 19.656898] input: Power Button (FF) as /class/input/input0
[ 19.656906] ACPI: Power Button (FF) [PWRF]
[ 19.656990] input: Power Button (CM) as /class/input/input1
[ 19.656995] ACPI: Power Button (CM) [PWRB]
[ 19.657080] input: Sleep Button (CM) as /class/input/input2
[ 19.657085] ACPI: Sleep Button (CM) [SLPB]
[ 19.657163] input: Lid Switch as /class/input/input3
[ 19.657166] ACPI: Lid Switch [LID]
[ 19.657420] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 19.657569] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 19.657592] Using specific hotkey driver
[ 19.662818] ACPI: Thermal Zone [THRM] (54 C)
[ 19.662845] ibm_acpi: ec object not found
[ 19.662855] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 19.917890] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc000c8eeb900]
[ 22.673873] floppy0: no floppy controllers found
[ 22.674641] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[ 22.675025] loop: loaded (max 8 devices)
[ 22.675028] Compaq SMART2 Driver (v 2.6.0)
[ 22.675085] HP CISS Driver (v 3.6.14)
[ 22.675300] v2.3 : Micro Memory(tm) PCI memory board block driver
[ 22.675347] MM: desc_per_page = 128
[ 22.675557] Loading iSCSI transport class v2.0-724.
[ 22.675807] Adaptec aacraid driver (1.1-5[2423]-mh3)
[ 22.676037] QLogic Fibre Channel HBA Driver
[ 22.676140] iscsi: registered transport (qla4xxx)
[ 22.676184] QLogic iSCSI HBA Driver
[ 22.676186] Emulex LightPulse Fibre Channel SCSI driver 8.1.11
[ 22.676190] Copyright(c) 2004-2006 Emulex. All rights reserved.
[ 22.676371] DC390: clustering now enabled by default. If you get problems load
[ 22.676373] with "disable_clustering=1" and report to maintainers
[ 22.676465] megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
[ 22.676561] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 22.676763] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 22.676814] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 22.676865] 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
[ 22.676911] ipr: IBM Power RAID SCSI Device Driver version: 2.3.0 (November 8, 2006)
[ 22.676958] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 22.677002] stex: Promise SuperTrak EX Driver version: 3.1.0.1
[ 22.677048] st: Version 20061107, fixed bufsize 32768, s/g segs 256
[ 22.677098] osst :I: Tape driver with OnStream support version 0.99.4
[ 22.677100] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 22.677785] sata_nv 0000:00:0e.0: version 3.2
[ 22.677797] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[ 22.678310] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 22.678321] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 23
[ 22.678352] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 22.678435] ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 23
[ 22.678473] ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 23
[ 22.678490] scsi0 : sata_nv
[ 23.131759] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 23.134923] ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48
[ 23.134927] ata1.00: ata1: dev 0 multi count 16
[ 23.137919] ata1.00: configured for UDMA/100
[ 23.137927] scsi1 : sata_nv
[ 23.440650] ata2: SATA link down (SStatus 0 SControl 300)
[ 23.451272] ATA: abnormal status 0x7F on port 0x30BF
[ 23.451376] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 23.451512] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 23.451527] sda: Write Protect is off
[ 23.451530] sda: Mode Sense: 00 3a 00 00
[ 23.451550] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.451606] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 23.451619] sda: Write Protect is off
[ 23.451622] sda: Mode Sense: 00 3a 00 00
[ 23.451644] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.451649] sda: sda1 sda2 sda3
[ 23.483991] sd 0:0:0:0: Attached scsi disk sda
[ 23.484076] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.484339] pata_amd 0000:00:0d.0: version 0.2.7
[ 23.484363] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 23.484420] ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x3080 irq 14
[ 23.484459] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 23.484483] scsi2 : pata_amd
[ 23.788773] ata3.00: ATAPI, max MWDMA2
[ 23.944726] ata3.00: configured for MWDMA2
[ 23.944734] scsi3 : pata_amd
[ 23.944817] ata4: port disabled. ignoring.
[ 23.944819] ata4: reset failed, giving up
[ 23.946017] scsi 2:0:0:0: CD-ROM PHILIPS DVD-RAM SDVD8821 EH19 PQ: 0 ANSI: 5
[ 23.957321] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 23.957325] Uniform CD-ROM driver Revision: 3.20
[ 23.957402] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 23.957496] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 23.958938] I2O subsystem v1.325
[ 23.958941] i2o: max drivers = 8
[ 23.959093] I2O Configuration OSM v1.323
[ 23.959175] I2O Bus Adapter OSM v1.317
[ 23.959211] I2O Block Device OSM v1.325
[ 23.959340] I2O SCSI Peripheral OSM v1.316
[ 23.959376] I2O ProcFS OSM v1.316
[ 23.959414] Fusion MPT base driver 3.04.03
[ 23.959416] Copyright (c) 1999-2007 LSI Logic Corporation
[ 23.959421] Fusion MPT SPI Host driver 3.04.03
[ 23.959481] Fusion MPT FC Host driver 3.04.03
[ 23.959537] Fusion MPT SAS Host driver 3.04.03
[ 23.959593] Fusion MPT misc device (ioctl) driver 3.04.03
[ 23.959642] mptctl: Registered with Fusion MPT base driver
[ 23.959645] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 23.959648] Fusion MPT LAN driver 3.04.03
[ 23.959734] usbcore: registered new interface driver usblp
[ 23.959737] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 23.959740] Initializing USB Mass Storage driver...
[ 23.959776] usbcore: registered new interface driver usb-storage
[ 23.959779] USB Mass Storage support registered.
[ 23.959815] usbcore: registered new interface driver libusual
[ 23.959852] usbcore: registered new interface driver hiddev
[ 23.959894] usbcore: registered new interface driver usbhid
[ 23.959897] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 23.959996] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 23.977002] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.977008] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.983861] parkbd: no such parport
[ 23.984084] mice: PS/2 mouse device common for all mice
[ 23.997304] input: AT Translated Set 2 keyboard as /class/input/input4
[ 24.742171] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 24.805467] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[ 24.809832] md: linear personality registered for level -1
[ 24.809835] md: raid0 personality registered for level 0
[ 24.809838] md: raid1 personality registered for level 1
[ 24.809841] md: raid10 personality registered for level 10
[ 24.826248] raid6: int64x1 1464 MB/s
[ 24.843266] raid6: int64x2 1871 MB/s
[ 24.860236] raid6: int64x4 1796 MB/s
[ 24.877253] raid6: int64x8 1355 MB/s
[ 24.894236] raid6: sse2x1 2164 MB/s
[ 24.911237] raid6: sse2x2 2835 MB/s
[ 24.928228] raid6: sse2x4 3042 MB/s
[ 24.928230] raid6: using algorithm sse2x4 (3042 MB/s)
[ 24.928234] md: raid6 personality registered for level 6
[ 24.928237] md: raid5 personality registered for level 5
[ 24.928239] md: raid4 personality registered for level 4
[ 24.928243] raid5: automatically using best checksumming function: generic_sse
[ 24.933213] generic_sse: 4936.000 MB/sec
[ 24.933216] raid5: using function: generic_sse (4936.000 MB/sec)
[ 24.933219] md: multipath personality registered for level -4
[ 24.933222] md: faulty personality registered for level -5
[ 24.933344] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 24.933519] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
[ 24.933582] ALSA device list:
[ 24.933584] No soundcards found.
[ 24.933662] TCP bic registered
[ 24.933678] NET: Registered protocol family 1
[ 24.933686] NET: Registered protocol family 17
[ 24.933855] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (version 2.00.00)
[ 24.933887] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 24.933891] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 24.933966] Suspend v2.2.9.3
[ 24.933991] Suspend2 Checksumming support registered.
[ 24.934028] Suspend2 Userspace Storage Manager support registered.
[ 24.934065] Suspend2 Userspace UI support registered.
[ 24.934103] Suspend2 Compressor support registered.
[ 24.934143] Suspend2 Encryptor support registered.
[ 24.934180] Suspend2 Block I/O support registered.
[ 24.934183] Suspend2 Swap Allocator support registered.
[ 24.934226] Suspend2 File Allocator support registered.
[ 24.934338] ACPI: (supports S0 S3 S4 S5)
[ 24.934380] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 24.934463] Freeing unused kernel memory: 392k freed
[ 25.129538] ata1: hard resetting port
[ 25.585051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 25.591218] ata1.00: configured for UDMA/100
[ 25.591222] ata1: EH complete
[ 25.591302] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 25.591317] sda: Write Protect is off
[ 25.591320] sda: Mode Sense: 00 3a 00 00
[ 25.591338] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.807408] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 25.807421] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22
[ 25.807439] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 25.807443] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 25.807533] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 25.807572] ehci_hcd 0000:00:0b.1: debug port 1
[ 25.807576] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 25.807589] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000
[ 25.807597] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 25.807772] usb usb1: configuration #1 chosen from 1 choice
[ 25.807830] hub 1-0:1.0: USB hub found
[ 25.807838] hub 1-0:1.0: 8 ports detected
[ 25.951202] USB Universal Host Controller Interface driver v3.0
[ 25.978609] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 25.979215] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
[ 25.979226] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 21 (level, high) -> IRQ 21
[ 25.979245] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 25.979249] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 25.979318] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 25.979341] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xb0004000
[ 26.033074] usb usb2: configuration #1 chosen from 1 choice
[ 26.033131] hub 2-0:1.0: USB hub found
[ 26.033143] hub 2-0:1.0: 8 ports detected
[ 26.166895] sl811: driver sl811-hcd, 19 May 2005
[ 26.306231] Registering unionfs 20060916-2203
[ 26.306235] unionfs: debugging is not enabled
[ 26.339886] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
[ 26.339891] Copyright (c) 1999-2006 Intel Corporation.
[ 26.396133] usb 2-6: new low speed USB device using ohci_hcd and address 2
[ 26.587013] usb 2-6: configuration #1 chosen from 1 choice
[ 26.596995] input: Logitech USB-PS/2 Optical Mouse as /class/input/input6
[ 26.597124] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-6
[ 27.754255] Suspend2: SwapAllocator: Signature found.
[ 27.754260] Suspend2: Resuming enabled.
[ 27.754522] Suspend2: Normal swapspace found.
[ 27.796176] kjournald starting. Commit interval 5 seconds
[ 27.796189] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.051600] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 32.051632] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 32.240668] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 32.240681] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 20 (level, high) -> IRQ 20
[ 32.240711] PCI: Setting latency timer of device 0000:00:10.1 to 64
[ 32.528320] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 32.528952] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 19
[ 32.528964] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 19 (level, high) -> IRQ 19
[ 32.528972] PCI: Setting latency timer of device 0000:00:14.0 to 64
[ 32.528981] forcedeth: using HIGHDMA
[ 32.818638] input: PC Speaker as /class/input/input7
[ 32.891892] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 32.891897] sdhci: Copyright(c) Pierre Ossman
[ 33.040473] ieee80211_crypt: registered algorithm 'NULL'
[ 33.041475] eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
[ 33.042745] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 33.042750] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 33.044381] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[ 33.044929] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
[ 33.044940] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 10 (level, high) -> IRQ 10
[ 33.044971] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
[ 33.045038] mmc0: SDHCI at 0xb3400800 irq 10 DMA
[ 33.050033] bcm43xx driver
[ 33.050715] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 18
[ 33.050727] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 18 (level, high) -> IRQ 18
[ 33.050739] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 36.975299] unionctl[5894]: segfault at 0000000000000000 rip 0000000000401870 rsp 00007fff0ad8c640 error 4
[ 37.169643] EXT3 FS on dm-0, internal journal
[ 37.986832] kjournald starting. Commit interval 5 seconds
[ 37.987066] EXT3 FS on sda2, internal journal
[ 37.987073] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.092499] Adding 1998840k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1998840k
[ 58.136247] fbsplash: console 1 using theme 'sabayon'
[ 58.153295] fbsplash: switched splash state to 'on' on console 1
[ 58.181007] fbsplash: console 2 using theme 'sabayon'
[ 58.190518] fbsplash: switched splash state to 'on' on console 2
[ 58.226691] fbsplash: console 3 using theme 'sabayon'
[ 58.249275] fbsplash: switched splash state to 'on' on console 3
[ 58.268252] fbsplash: console 4 using theme 'sabayon'
[ 58.294481] fbsplash: switched splash state to 'on' on console 4
[ 58.319374] fbsplash: console 5 using theme 'sabayon'
[ 58.327865] fbsplash: switched splash state to 'on' on console 5
[ 58.351452] fbsplash: console 11 using theme 'sabayon'
[ 58.359337] fbsplash: switched splash state to 'on' on console 11
[ 100.085599] Losing some ticks... checking if CPU frequency changed.
[ 681.528600] eth0: link down.
[ 706.382533] eth0: link up.