rendered paste bodyLinux version 2.6.19-gentoo-r5 (root@darkside) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #17 Fri Jun 1 16:35:29 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data)
BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 260048) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 260048
early_node_map[1] active PFN ranges
0: 0 -> 260048
On node 0 totalpages: 260048
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 239 pages used for memmap
HighMem zone: 30433 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 ACPIAM ) @ 0x000f8870
ACPI: RSDT (v001 A M I OEMRSDT 0x10000527 MSFT 0x00000097) @ 0x3f7d0000
ACPI: FADT (v002 A M I OEMFACP 0x10000527 MSFT 0x00000097) @ 0x3f7d0200
ACPI: MADT (v001 A M I OEMAPIC 0x10000527 MSFT 0x00000097) @ 0x3f7d0390
ACPI: MCFG (v001 A M I OEMMCFG 0x10000527 MSFT 0x00000097) @ 0x3f7d03f0
ACPI: OEMB (v001 A M I AMI_OEM 0x10000527 MSFT 0x00000097) @ 0x3f7de040
ACPI: MCFG (v001 A M I OEMMCFG 0x10000527 MSFT 0x00000097) @ 0x3f7d4b60
ACPI: SSDT (v001 AMI0 CPU1PM 0x00000001 INTL 0x02002026) @ 0x3f7d4ba0
ACPI: DSDT (v001 255EI 255EI008 0x00000008 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:a0800000)
Detected 1733.478 MHz processor.
Built 1 zonelists. Total pages: 258017
Kernel command line: root=/dev/sda3
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1024036k/1040192k available (3448k kernel code, 15592k reserved, 1701k data, 240k init, 122688k highmem)
virtual kernel memory layout:
fixmap : 0xfffa9000 - 0xfffff000 ( 344 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0686000 - 0xc06c2000 ( 240 kB)
.data : 0xc045e25b - 0xc0607950 (1701 kB)
.text : 0xc0100000 - 0xc045e25b (3448 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3468.16 BogoMIPS (lpj=1734083)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
tbxface-0107 [01] load_tables : ACPI Tables successfully acquired
Parsing all Control Methods:
Table [DSDT](id 0006) - 614 Objects with 62 Devices 169 Methods 19 Regions
Parsing all Control Methods:
Table [SSDT](id 0004) - 12 Objects with 0 Devices 4 Methods 0 Regions
ACPI Namespace successfully loaded at root c0728690
evxfevnt-0089 [02] enable : Transition to ACPI mode successful
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: 2 duplicate MCFG table ignored.
PCI: Using MMCONFIG
Setting up standard PCI resources
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
evgpeblk-0951 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..............................................................................................
Initialized 18/19 Regions 13/13 Fields 28/28 Buffers 35/37 Packages (635 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:
Executed 0 _INI methods requiring 0 _STA executions (examined 66 objects)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
[ACPI Debug] String: [0x0D] "BAT_STA Start"
Boot video device is 0000:00:02.0
PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#02) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 16
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[ffcff000-ffcff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 2, cardbus bridge: 0000:01:03.0
IO window: 0000c000-0000c0ff
IO window: 0000c400-0000c4ff
PREFETCH window: 42000000-43ffffff
MEM window: 44000000-45ffffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-dfff
MEM window: ff400000-ffcfffff
PREFETCH window: bdf00000-bfefffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 17 (level, low) -> IRQ 17
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.27 [Flags: R/W DEBUG].
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
ACPI: AC Adapter [AC0] (off-line)
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x03] "BIF"
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (52 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4925900719]
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 18
eth0: RTL8169sb/8110sb at 0xf8836c00, 00:03:0d:3a:00:c6, IRQ 18
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
hdc: PHILIPS CD-RW/DVD-ROM SCB5265, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
ahci 0000:00:1f.2: version 2.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
ahci: probe of 0000:00:1f.2 failed with error -12
ata_piix 0000:00:1f.2: version 2.00ac6
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
ata: 0x170 IDE port busy
ata: conflict with ide1
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
ata2: DUMMY
scsi0 : ata_piix
ata1.00: ATA-7, max UDMA/100, 78242976 sectors: LBA48
ata1.00: ata1: dev 0 multi count 16
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
scsi1 : ata_piix
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0402H UC20 PQ: 0 ANSI: 5
SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Fusion MPT base driver 3.04.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.02
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffe3fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000e800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000e880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: DELL DELL USB Keyboard as /class/input/input0
input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 18
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
i2c_adapter i2c-0: adapter [SMBus I801 adapter at 0400] registered
i2c-dev: adapter [SMBus I801 adapter at 0400] registered as minor 0
i2c-core: driver [ds1337] registered
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x68
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=d0, DAT0=0e, DAT1=00
input: AT Translated Set 2 keyboard as /class/input/input1
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=d0, DAT0=0e, DAT1=00
i2c-core: driver [ds1374] registered
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x68
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=d0, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=d0, DAT0=0e, DAT1=00
i2c-core: driver [eeprom] registered
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x50
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a0, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a0, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a0, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a0, DAT0=0e, DAT1=00
i2c_adapter i2c-0: client [eeprom] registered with bus id 0-0050
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x51
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a2, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a2, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x52
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a4, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a4, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a4, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a4, DAT0=0e, DAT1=00
i2c_adapter i2c-0: client [eeprom] registered with bus id 0-0052
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x53
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a6, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a6, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x54
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=a8, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=a8, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x55
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=aa, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=aa, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x56
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ac, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ac, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x57
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ae, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ae, DAT0=0e, DAT1=00
i2c-core: driver [max6875] registered
i2c-core: driver [pca9539] registered
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x74
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=e8, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=e8, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x75
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ea, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ea, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x76
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ec, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ec, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x77
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=ee, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=ee, DAT0=0e, DAT1=00
i2c-core: driver [pcf8574] registered
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x20
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=40, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=40, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x21
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=42, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=42, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x22
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=44, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=44, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x23
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=46, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=46, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x24
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=48, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=48, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x25
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=4a, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=4a, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x26
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=4c, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=4c, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x27
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=4e, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=4e, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x38
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=70, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=70, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x39
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=72, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=72, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3a
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=74, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=74, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3b
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=76, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=76, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3c
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=78, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=78, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3d
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=7a, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=7a, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3e
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=7c, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=7c, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x3f
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=7e, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=7e, DAT0=0e, DAT1=00
i2c-core: driver [pcf8591] registered
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x48
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=90, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=90, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x49
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=92, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=92, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4a
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=94, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=94, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4b
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=96, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=96, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4c
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=98, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=98, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4d
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=9a, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=9a, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4e
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=9c, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=9c, DAT0=0e, DAT1=00
i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x4f
i801_smbus 0000:00:1f.3: Transaction (pre): CNT=00, CMD=03, ADD=9e, DAT0=0e, DAT1=00
i801_smbus 0000:00:1f.3: Error: no response!
i801_smbus 0000:00:1f.3: Transaction (post): CNT=00, CMD=03, ADD=9e, DAT0=0e, DAT1=00
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
Intel 810 + AC97 Audio, version 1.01, 08:46:47 Apr 6 2007
Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
#0: HDA Intel at 0xffe38000 irq 20
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination
acpi_processor-0740 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination
Using IPI Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
input: SynPS/2 Synaptics TouchPad as /class/input/input2
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: journal-1153: found in header: first_unflushed_offset 2057, last_flushed_trans_id 276230
ReiserFS: sda3: journal-1206: Starting replay from offset 1186403111143433, trans_id 8
ReiserFS: sda3: journal-1299: Setting newest_mount_id to 159
ReiserFS: sda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 240k freed
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
intelfb: intelfb_init
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
intelfb: intelfb_pci_register
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
intelfb: fb aperture: 0xd0000000/0x10000000, MMIO region: 0xffe80000/0x80000
intelfb: 00:02.0: Intel(R) 915GM, aperture size 256MB, stolen memory 7932kB
intelfb: fb: 0xd0000000(+ 0x0)/0x7bf000 (0xf8b00000)
intelfb: MMIO: 0xffe80000/0x80000 (0xfc300000)
intelfb: ring buffer: 0xd3001000/0x10000 (0xfbb01000)
intelfb: HW cursor: 0x0/0x0 (0x00000000) (offset 0x0) (phys 0x0)
intelfb: options: vram = 4, accel = 1, hwcursor = 0, fixed = 0, noinit = 0
intelfb: options: mode = ""
intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode switching.
intelfb: Video mode must be programmed at boot time.
intelfb: cleanup
ieee80211_crypt: exports duplicate symbol ieee80211_crypt_deinit_entries (owned by kernel)
ieee80211: disagrees about version of symbol ieee80211_get_crypto_ops
ieee80211: Unknown symbol ieee80211_get_crypto_ops
ieee80211: disagrees about version of symbol ieee80211_crypt_deinit_entries
ieee80211: Unknown symbol ieee80211_crypt_deinit_entries
ieee80211: disagrees about version of symbol ieee80211_crypt_delayed_deinit
ieee80211: Unknown symbol ieee80211_crypt_delayed_deinit
ieee80211: disagrees about version of symbol ieee80211_crypt_quiescing
ieee80211: Unknown symbol ieee80211_crypt_quiescing
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4kdmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 19 (level, low) -> IRQ 18
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
ieee80211_crypt: exports duplicate symbol ieee80211_crypt_deinit_entries (owned by kernel)
ieee80211: disagrees about version of symbol ieee80211_get_crypto_ops
ieee80211: Unknown symbol ieee80211_get_crypto_ops
ieee80211: disagrees about version of symbol ieee80211_crypt_deinit_entries
ieee80211: Unknown symbol ieee80211_crypt_deinit_entries
ieee80211: disagrees about version of symbol ieee80211_crypt_delayed_deinit
ieee80211: Unknown symbol ieee80211_crypt_delayed_deinit
ieee80211: disagrees about version of symbol ieee80211_crypt_quiescing
ieee80211: Unknown symbol ieee80211_crypt_quiescing
[drm] Initialized drm 1.0.1 20051102
[drm] Initialized i915 1.5.0 20060119 on minor 0
Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
r8169: eth0: link up
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
[ACPI Debug] String: [0x0D] "BAT_STA Start"
usb 3-2: USB disconnect, address 2
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
input: DELL DELL USB Keyboard as /class/input/input4
input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.1-2
hub 2-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
usb 2-1: USB disconnect, address 2
usb 2-1: new low speed USB device using uhci_hcd and address 3
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /class/input/input5
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
usb 3-1: new low speed USB device using uhci_hcd and address 4
usb 3-1: configuration #1 chosen from 1 choice