Untitled

oot@pc-desktop:~# /sbin/wpa_supplicant -d wext -i wlan0 -c/etc/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Line: 1 - start of a new network block
key_mgmt: 0x2
proto: 0x1
pairwise: 0x8
ssid - hexdump_ascii(len=4):
     6a 75 6b 69                                       juki
PSK (ASCII passphrase) - hexdump_ascii(len=13): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line 8: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Priority group 0
   id=0 ssid='juki'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=19 WE(source)=18 enc_capa=0xf
  capabilities: key_mgmt 0xf enc 0xf
Own MAC address: 00:19:5b:03:74:a4
wpa_driver_hostap_set_wpa: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Driver does not support WPA.
wpa_driver_hostap_set_key: alg=none key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_key: alg=none key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
Failed to set encryption.
wpa_driver_hostap_set_countermeasures: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
wpa_driver_hostap_set_drop_unencrypted: enabled=1
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Setting scan request: 0 sec 100000 usec
Added interface wlan0
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
Scan results: -1
Failed to get scan results
Failed to get scan results - try scanning again
Setting scan request: 1 sec 0 usec
Starting AP scan (broadcast SSID)
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_hostap_set_wpa: enabled=0
ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
Failed to disable WPA in the driver.
wpa_driver_hostap_set_drop_unencrypted: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
wpa_driver_hostap_set_countermeasures: enabled=0
ioctl[PRISM2_IOCTL_PRISM2_PARAM]: Operation not supported
No keys have been configured - skip key clearing