rendered paste bodyMyLoader version 2.40.0206
System memory: 16MB
Probe Flash Device: 00400000 at bfc00000
Flash Device: Found 1 x16 devices at 0x0 in 16-bit mode
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Flash memory: 4MB
Load Firmware
Loading Firmware ....................................................................
................................................................................ Done
.
CPU revision is: 0001800b
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.28 (ttyaw@linux01) (gcc version 3.3.5) #1 Tue Aug 29 16:13:38 SGT 2
006
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Initial ramdisk at: 0x801d6000 (3149824 bytes)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200
CPU clock: 175MHz
Using 87.500 MHz high precision timer.
Calibrating delay loop... 174.48 BogoMIPS
Memory: 11244k/16384k available (1418k kernel code, 5140k reserved, 96k data, 92k ini
t, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
Autoconfig PCI channel 0x8019e938
Scanning bus 00, I/O 0x11500000:0x115ffff0, Mem 0x11400000:0x11500000
00:00.0 Class 0600: 1317:5120
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
ADMtek ADM5120 Serial driver version 1.0 (2004-10-28)
ttyS00 at 0x12600000 (irq = 1) is a ADM5120 Serial
ttyS01 at 0x12800000 (irq = 2) is a ADM5120 Serial
ledman: Copyright (C) SnapGear, 2000-2002.
Button Driver Version 0.2 (2003-10-22) Luo Yi Ming
Hardware Watchdog Timer for ADM5120: 0.0.1, hualab
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
ADMtek ADM5120 10/100 Ethernet driver v0.3.0 (Mar 16, 2004)
eth0: at 0x12000000, 00:80:48:3e:c4:64, IRQ 9
physmap flash device: 400000 at 1fc00000
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Found mylo partition table.
Creating 3 MTD partitions on "Physically mapped flash":
0x00030000-0x003f0000 : "partition0"
0x003f0000-0x00400000 : "partition1"
0x00020000-0x00030000 : "partition2"
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3076 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 3076k freed
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 92k freed
Algorithmics/MIPS FPU Emulator v1.5
More product id needs to be defined?
--------config_sys_get error--------
Mounting proc filesystem:
Mounting local filesystems:
Loader update:
Start watchdog:
Start button:
Start localtime:
Start netif:
Start network:
Using /lib/modules/wireless/wlan.o
wlan: 0.8.4.2 (Atheros/multi-bss)
Using /lib/modules/wireless/wlan_xauth.o
Using /lib/modules/wireless/wlan_acl.o
wlan: mac acl policy registered
Using /lib/modules/wireless/wlan_wep.o
Using /lib/modules/wireless/wlan_tkip.o
Using /lib/modules/wireless/wlan_ccmp.o
Using /lib/modules/wireless/wlan_scan_sta.o
Using /lib/modules/wireless/wlan_scan_ap.o
Using /lib/modules/wireless/wlan_client.o
wlan: client bridge registered
Using /lib/modules/wireless/ath_hal.o
Warning: loading ath_hal will taint the kernel: non-GPL license - Proprietary
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
ath_hal: 0.9.16.1 (AR5212, RF5112, RF2413, RF5413)
Using /lib/modules/wireless/ath_rate_sample.o
ath_rate_sample: 1.2
Using /lib/modules/wireless/ath_pci.o
ath_pci: 0.9.4.5 (Atheros/multi-bss)
Start pcidevtest:
Start bridge:
dev.eth0.pass_vlan = 1
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
Start stp:
Start loop:
Start lan:
Start snmpd:
Start telnetd:
Start uconfig:
Start ntpdate:
ntpdate: time.nist.gov - unknown host.
Jan 1 00:00:07 passwd[116]: password for `admin' changed by user `root'
Start webs:
Start monitorps: