All pastes #571713 Raw Edit

florian

public text v1 · immutable
·published 2007-06-17 08:49 UTC
rendered paste body
Initializing Arena.
Initializing PCI. [normal]
PCI bus 0 slot 0/0: ADMtek ADM5120 Host Bridge (host bridge)
Initializing Devices.
CPU type 0x1800B: 175MHz
Total memory: 0x1000000 bytes (16MB)

Total memory used by CFE:  0x80F83000 - 0x80FFFAE0 (510688)
Initialized Data:          0x80FBA824 - 0x80FBCA50 (8748)
BSS Area:                  0x80FBCA50 - 0x80FBDAE0 (4240)
Local Heap:                0x80FBDAE0 - 0x80FFDAE0 (262144)
Stack Area:                0x80FFDAE0 - 0x80FFFAE0 (8192)
Text (code) segment:       0x80F83000 - 0x80FBA115 (225557)
Boot area (physical):      0x00F42000 - 0x00F82000
Relocation Factor:         I:E1383000 - D:E1383000

Press Ctrl-C to cancel automatic startup
Loader:raw Filesys:raw Dev:flash1.trx File:0x1c Options:(null)
Loading: ... 4928 bytes read
Entry at 0x80001000
Starting program at 0x80001000



LZMA loader for ADM5120, Copyright (C) 2007 OpenWrt.org

Looking for TRX header... found at 0xBFC50000, kernel in partition 1
decompressing kernel... done!
launching kernel...

mem_detect: checking for 64MB chip
mem_detect: 1st pattern at 0x200000 is 0x2a
mem_detect: 1st pattern at 0x400000 is 0x00
mem_detect: 1st pattern at 0x800000 is 0x00
mem_detect: 1st pattern at 0x1000000 is 0x55
mem_detect: 2nd pattern at 0x1000000 is 0x55
mem_detect: mirrored data found at 0x1000000
mem_detect: 16MB chip found
mem_detect: 16MB memory found
Linux version 2.6.21.5 (florian@dorelei) (gcc version 4.1.2) #4 Sat Jun 16 22:22:15 CEST 2007
ADM5120 revision 8, running at 175MHz
Boot loader is: CFE
Booted from   : NOR flash
Board is      : Compex WP54G-WRT
Memory size   : 16MB
CPU revision is: 0001800b
ADM5120 board setup
Determined physical RAM map:
 memory: 00d37000 @ 002c9000 (usable)
Wasting 22816 bytes for tracking 713 unused pages
Initrd not found or empty - disabling initrd
Built 1 zonelists.  Total pages: 4064
Kernel command line: console=ttyS0,115200 rootfs=jffs2,squashfs,yaffs2 init=/etc/preinit
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Using 87.500 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13384k/13532k available (2256k kernel code, 148k reserved, 352k data, 128k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
adm5120: system has PCI BIOS
registering PCI controller with io_map_base unset
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.
yaffs Jun 16 2007 22:03:50 Installing.
io scheduler noop registered
io scheduler deadline registered (default)
Registered led device: adm5120:led
ttyS0 at I/O 0x12600000 (irq = 9) is a ADM5120
ttyS1 at I/O 0x12800000 (irq = 10) is a ADM5120
eth0: ADM5120 switch port0
eth1: ADM5120 switch port1
adm5120 : flash init : 0x1fc00000 0x00400000
adm5120 physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x400000 at 0x1fc00000
adm5120 : using CFE flash mapping
bootloader size: 327680
Creating 4 MTD partitions on "adm5120 physically mapped flash":
0x00000000-0x00050000 : "cfe"
0x00050000-0x003f0000 : "linux"
0x0011f400-0x003f0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x00230000-0x003f0000 : "rootfs_data"
0x003f0000-0x00400000 : "nvram"
block2mtd: version $Revision: 1.30 $
RB1xx nand
No NAND device found!!!
No NAND device found!!!
No NAND device found!!!
No NAND device found!!!
RB1xxx nand device not found
nf_conntrack version 0.5.0 (105 buckets, 840 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 128k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
- preinit -
switching to jffs2
JFFS2 notice: (1719) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xre.
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
- init -
init started:  BusyBox v1.4.2 (2007-06-16 21:04:33 CEST) multi-call binary

Please press Enter to activate this console. device eth0 entered promiscuous mode
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
device eth0 entered promiscuous mode
PPP generic driver version 2.4.2
wlan: 0.8.4.2 (svn r2420)
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, REGOPS_FUNC)
ath_rate_minstrel: 1.2 (svn r2420)

Minstrel automatic rate control algorithm.

Look around rate set to 10%
EWMA rolloff level set to 75%
Max Segment size in the mrr set to 6000 us

wlan: mac acl policy registered
ath_pci: 0.9.4.5 (svn r2420)
br-lan: port 1(eth0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 1(eth0) entering forwarding state