rendered paste body~$ sudo asoundconf list
Names of available sound cards:
EWX2496
iain@ubuntu:~$ sudo cat /etc/asound.conf ~/.asoundrc
cat: /etc/asound.conf: No such file or directory
cat: /home/iain/.asoundrc: No such file or directory
iain@ubuntu:~$ dmesg
[ 0.000000] Linux version 2.6.20-16-lowlatency (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP PREEMPT Thu Jun 7 20:23:03 UTC 2007 (Ubuntu Unofficial)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003beb0000 end: 000000003bfb0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003bfb0000 size: 000000000000e000 end: 000000003bfbe000 type: 3
[ 0.000000] copy_e820_map() start: 000000003bfbe000 size: 0000000000022000 end: 000000003bfe0000 type: 4
[ 0.000000] copy_e820_map() start: 000000003bfe0000 size: 0000000000020000 end: 000000003c000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
[ 0.000000] BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 63MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 245680) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 245680
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 245680
[ 0.000000] On node 0 totalpages: 245680
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 127 pages used for memmap
[ 0.000000] HighMem zone: 16177 pages, LIFO batch:3
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fac60
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x12000506 MSFT 0x00000097) @ 0x3bfb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x12000506 MSFT 0x00000097) @ 0x3bfb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x12000506 MSFT 0x00000097) @ 0x3bfb0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x12000506 MSFT 0x00000097) @ 0x3bfbe040
[ 0.000000] ACPI: DSDT (v001 A0347 A0347001 0x00000001 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:a4000000)
[ 0.000000] Detected 1800.251 MHz processor.
[ 9.640024] Built 1 zonelists. Total pages: 243761
[ 9.640028] Kernel command line: root=UUID=ea685670-2d17-4bde-ad15-18293ae78611 ro quiet splash
[ 9.640166] mapped APIC to ffffd000 (fee00000)
[ 9.640169] mapped IOAPIC to ffffc000 (fec00000)
[ 9.640172] Enabling fast FPU save and restore... done.
[ 9.640174] Enabling unmasked SIMD FPU exception support... done.
[ 9.640181] Initializing CPU#0
[ 9.640233] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 9.641946] Console: colour VGA+ 80x25
[ 9.642286] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 9.642681] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 9.659393] Memory: 962956k/982720k available (2019k kernel code, 19116k reserved, 902k data, 328k init, 65216k highmem)
[ 9.659403] virtual kernel memory layout:
[ 9.659404] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 9.659406] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 9.659407] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 9.659408] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 9.659409] .init : 0xc03e1000 - 0xc0433000 ( 328 kB)
[ 9.659411] .data : 0xc02f8c85 - 0xc03da6d4 ( 902 kB)
[ 9.659412] .text : 0xc0100000 - 0xc02f8c85 (2019 kB)
[ 9.659415] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 9.719106] Calibrating delay using timer specific routine.. 3601.36 BogoMIPS (lpj=1800681)
[ 9.719148] Security Framework v1.0.0 initialized
[ 9.719153] SELinux: Disabled at boot.
[ 9.719170] Mount-cache hash table entries: 512
[ 9.719290] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 9.719299] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 9.719301] CPU: L2 Cache: 512K (64 bytes/line)
[ 9.719304] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 9.719315] Compat vDSO mapped to ffffe000.
[ 9.719319] Remapping vsyscall page to ffffe000
[ 9.719328] Checking 'hlt' instruction... OK.
[ 9.723215] SMP alternatives: switching to UP code
[ 9.723375] Freeing SMP alternatives: 9k freed
[ 9.723522] Early unpacking initramfs... done
[ 10.028642] ACPI: Core revision 20060707
[ 10.029079] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 10.031168] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 02
[ 10.031188] Total of 1 processors activated (3601.36 BogoMIPS).
[ 10.031296] ENABLING IO-APIC IRQs
[ 10.031467] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 10.142433] Brought up 1 CPUs
[ 10.142638] Booting paravirtualized kernel on bare hardware
[ 10.142732] Time: 13:40:47 Date: 05/15/107
[ 10.142759] NET: Registered protocol family 16
[ 10.142832] EISA bus registered
[ 10.142835] ACPI: bus type pci registered
[ 10.143524] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 10.143527] PCI: Using configuration type 1
[ 10.143528] Setting up standard PCI resources
[ 10.151130] ACPI: Interpreter enabled
[ 10.151133] ACPI: Using IOAPIC for interrupt routing
[ 10.152220] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.152225] PCI: Probing PCI hardware (bus 00)
[ 10.153254] Boot video device is 0000:01:00.0
[ 10.153641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.171260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 10.173837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 10.173960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
[ 10.174235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
[ 10.174524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 10.176960] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 10.177195] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 10.177441] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 10.177674] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 10.177971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 10.178207] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 10.178447] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 10.178681] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 10.178762] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.178770] pnp: PnP ACPI init
[ 10.181729] pnp: PnP ACPI: found 11 devices
[ 10.181733] PnPBIOS: Disabled by ACPI PNP
[ 10.181781] PCI: Using ACPI for IRQ routing
[ 10.181784] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.194746] NET: Registered protocol family 8
[ 10.194748] NET: Registered protocol family 20
[ 10.195411] pnp: 00:06: ioport range 0x290-0x297 has been reserved
[ 10.195647] PCI: Bridge: 0000:00:01.0
[ 10.195649] IO window: disabled.
[ 10.195654] MEM window: fca00000-feafffff
[ 10.195658] PREFETCH window: cff00000-d7efffff
[ 10.195662] PCI: Bridge: 0000:02:00.0
[ 10.195664] IO window: disabled.
[ 10.195667] MEM window: disabled.
[ 10.195670] PREFETCH window: disabled.
[ 10.195674] PCI: Bridge: 0000:02:00.1
[ 10.195676] IO window: disabled.
[ 10.195679] MEM window: disabled.
[ 10.195682] PREFETCH window: disabled.
[ 10.195686] PCI: Bridge: 0000:00:13.0
[ 10.195687] IO window: disabled.
[ 10.195691] MEM window: disabled.
[ 10.195694] PREFETCH window: disabled.
[ 10.195698] PCI: Bridge: 0000:00:13.1
[ 10.195700] IO window: d000-dfff
[ 10.195704] MEM window: disabled.
[ 10.195707] PREFETCH window: disabled.
[ 10.195722] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 10.195729] PCI: Setting latency timer of device 0000:00:13.0 to 64
[ 10.195740] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 10.195753] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 10.195760] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 10.195788] NET: Registered protocol family 2
[ 10.205361] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 10.205509] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 10.206579] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 10.207107] TCP: Hash tables configured (established 131072 bind 65536)
[ 10.207111] TCP reno registered
[ 10.209410] checking if image is initramfs... it is
[ 10.809302] Freeing initrd memory: 6892k freed
[ 10.809682] audit: initializing netlink socket (disabled)
[ 10.809694] audit(1181914847.365:1): initialized
[ 10.809758] highmem bounce pool size: 64 pages
[ 10.809815] VFS: Disk quotas dquot_6.5.1
[ 10.809833] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.809877] io scheduler noop registered
[ 10.809879] io scheduler anticipatory registered
[ 10.809882] io scheduler deadline registered
[ 10.809890] io scheduler cfq registered (default)
[ 10.810116] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 10.810145] assign_interrupt_mode Found MSI capability
[ 10.810148] Allocate Port Service[0000:02:00.0:pcie00]
[ 10.810232] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 10.810262] assign_interrupt_mode Found MSI capability
[ 10.810265] Allocate Port Service[0000:02:00.1:pcie00]
[ 10.810391] isapnp: Scanning for PnP cards...
[ 11.166591] isapnp: No Plug & Play device found
[ 11.192620] Real Time Clock Driver v1.12ac
[ 11.192671] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 11.193263] mice: PS/2 mouse device common for all mice
[ 11.193724] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 11.193846] input: Macintosh mouse button emulation as /class/input/input0
[ 11.193873] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 11.193876] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 11.194152] PNP: No PS/2 controller found. Probing ports directly.
[ 11.194475] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 11.194517] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 11.194572] EISA: Probing bus 0 at eisa.0
[ 11.194612] EISA: Detected 0 cards.
[ 11.224660] TCP cubic registered
[ 11.224667] NET: Registered protocol family 1
[ 11.224684] Using IPI No-Shortcut mode
[ 11.224734] ACPI: (supports S0 S1 S3 S4 S5)
[ 11.224771] Magic number: 11:636:685
[ 11.225117] Freeing unused kernel memory: 328k freed
[ 11.225572] Time: tsc clocksource has been installed.
[ 12.460479] Capability LSM initialized
[ 12.502405] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 12.502414] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 13.072811] SCSI subsystem initialized
[ 13.077034] libata version 2.20 loaded.
[ 13.079371] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[ 13.079389] VP_IDE: chipset revision 7
[ 13.079392] VP_IDE: not 100% native mode: will probe irqs later
[ 13.079403] VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[ 13.079410] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[ 13.079422] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[ 13.079429] Probing IDE interface ide0...
[ 13.098742] usbcore: registered new interface driver usbfs
[ 13.098761] usbcore: registered new interface driver hub
[ 13.098784] usbcore: registered new device driver usb
[ 13.166481] USB Universal Host Controller Interface driver v3.0
[ 13.210585] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 13.303053] Floppy drive(s): fd0 is 1.44M
[ 13.354438] FDC 0 is a post-1991 82077
[ 13.476028] hda: SAMSUNG SP2514N, ATA DISK drive
[ 13.730609] hdb: Maxtor 6Y080L0, ATA DISK drive
[ 13.781903] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 13.781954] Probing IDE interface ide1...
[ 14.574226] hdc: ASUS DRW-1608P2S, ATAPI CD/DVD-ROM drive
[ 15.185492] ide1 at 0x170-0x177,0x376 on irq 15
[ 15.187799] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 15.187811] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 15.188030] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 15.188056] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000ec00
[ 15.188559] usb usb1: configuration #1 chosen from 1 choice
[ 15.188701] hub 1-0:1.0: USB hub found
[ 15.188709] hub 1-0:1.0: 2 ports detected
[ 15.197020] hda: max request size: 512KiB
[ 15.210517] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
[ 15.211657] hda: cache flushes supported
[ 15.211698] hda: hda1 hda2 < hda5 hda6 hda7 > hda3
[ 15.260244] hdb: max request size: 128KiB
[ 15.260818] hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 15.260950] hdb: cache flushes supported
[ 15.260971] hdb: hdb1
[ 15.289088] ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 17
[ 15.289100] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 15.289119] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 15.289147] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e880
[ 15.289233] usb usb2: configuration #1 chosen from 1 choice
[ 15.289252] hub 2-0:1.0: USB hub found
[ 15.289259] hub 2-0:1.0: 2 ports detected
[ 15.310937] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66)
[ 15.310946] Uniform CD-ROM driver Revision: 3.20
[ 15.389910] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18
[ 15.389921] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 15.389943] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 15.389968] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000e800
[ 15.390044] usb usb3: configuration #1 chosen from 1 choice
[ 15.390065] hub 3-0:1.0: USB hub found
[ 15.390073] hub 3-0:1.0: 2 ports detected
[ 15.490741] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 19
[ 15.490753] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 15.490772] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 15.490797] uhci_hcd 0000:00:10.3: irq 19, io base 0x0000e480
[ 15.490880] usb usb4: configuration #1 chosen from 1 choice
[ 15.490902] hub 4-0:1.0: USB hub found
[ 15.490908] hub 4-0:1.0: 2 ports detected
[ 15.494635] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 15.591673] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 15.591745] eth0: VIA Rhine II at 0x1e000, 00:13:d4:a7:97:9d, IRQ 19.
[ 15.592458] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 15.592554] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 17
[ 15.592563] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 15.592588] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 15.592618] ehci_hcd 0000:00:10.4: debug port 1
[ 15.592627] ehci_hcd 0000:00:10.4: irq 17, io mem 0xfebfcc00
[ 15.592634] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.592706] usb usb5: configuration #1 chosen from 1 choice
[ 15.592727] hub 5-0:1.0: USB hub found
[ 15.592734] hub 5-0:1.0: 8 ports detected
[ 15.598258] Attempting manual resume
[ 15.598262] swsusp: Resume From Partition 3:7
[ 15.598264] PM: Checking swsusp image.
[ 15.646924] PM: Resume from disk failed.
[ 15.685523] kjournald starting. Commit interval 5 seconds
[ 15.685533] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.011781] usb 1-1: device not accepting address 2, error -71
[ 17.304663] usb 1-1: new low speed USB device using uhci_hcd and address 4
[ 17.466676] usb 1-1: configuration #1 chosen from 1 choice
[ 17.675055] usb 1-2: new low speed USB device using uhci_hcd and address 5
[ 17.842078] usb 1-2: configuration #1 chosen from 1 choice
[ 23.115368] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 24.394461] NET: Registered protocol family 17
[ 24.865988] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.965432] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.967031] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.272003] agpgart: Detected AGP bridge 0
[ 25.274020] agpgart: AGP aperture is 64M @ 0xdc000000
[ 25.646804] usbcore: registered new interface driver hiddev
[ 25.667768] input: PC Speaker as /class/input/input1
[ 25.737256] input: CHESEN USB Keyboard as /class/input/input2
[ 25.737296] input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:10.0-1
[ 25.765145] input: CHESEN USB Keyboard as /class/input/input3
[ 25.765201] input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:10.0-1
[ 25.824114] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input4
[ 25.824215] input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.0-2
[ 25.824233] usbcore: registered new interface driver usbhid
[ 25.824237] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 25.825318] usbcore: registered new interface driver xpad
[ 25.825322] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[ 26.230366] ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 17 (level, low) -> IRQ 20
[ 26.422427] lp: driver loaded but no devices found
[ 26.470272] fuse init (API version 7.8)
[ 26.503185] Adding 2843432k swap on /dev/disk/by-uuid/49097ba8-11b4-4c82-9185-32cb2c152390. Priority:-1 extents:1 across:2843432k
[ 26.616312] EXT3 FS on hda3, internal journal
[ 26.823341] NET: Registered protocol family 10
[ 26.823438] lo: Disabled Privacy Extensions
[ 27.443690] input: Power Button (FF) as /class/input/input5
[ 27.447366] ACPI: Power Button (FF) [PWRF]
[ 27.476762] input: Sleep Button (CM) as /class/input/input6
[ 27.480416] ACPI: Sleep Button (CM) [SLPB]
[ 27.509443] input: Power Button (CM) as /class/input/input7
[ 27.513070] ACPI: Power Button (CM) [PWRB]
[ 27.613460] Using specific hotkey driver
[ 27.628087] ibm_acpi: ec object not found
[ 27.667631] No dock devices found.
[ 27.690770] pcc_acpi: loading...
[ 27.876827] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
[ 27.876858] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6
[ 27.876861] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 32.928457] ppdev: user-space parallel port driver
[ 33.620095] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 33.620332] apm: overridden by ACPI.
[ 24.354000] Time: acpi_pm clocksource has been installed.
[ 25.230000] Bluetooth: Core ver 2.11
[ 25.230000] NET: Registered protocol family 31
[ 25.230000] Bluetooth: HCI device and connection manager initialized
[ 25.230000] Bluetooth: HCI socket layer initialized
[ 25.399000] Bluetooth: L2CAP ver 2.8
[ 25.399000] Bluetooth: L2CAP socket layer initialized
[ 25.404000] Bluetooth: RFCOMM socket layer initialized
[ 25.404000] Bluetooth: RFCOMM TTY layer initialized
[ 25.404000] Bluetooth: RFCOMM ver 1.8
[ 36.619000] eth0: no IPv6 routers present