#======================= Global Settings =======================[global]## Browsing/Identification #### Change this to the workgroup/NT-domain name your Samba server will part ofworkgroup = CYBERSAT# server string is the equivalent of the NT Description fieldserver string = %h server# Windows Internet Name Serving Support Section:# WINS Support - Tells the NMBD component of Samba to enable its WINS Server; wins support = no# WINS Server - Tells the NMBD components of Samba to be a WINS Client# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both; wins server = w.x.y.z# This will prevent nmbd to search for NetBIOS names through DNS.dns proxy = no# What naming service and in what order should we use to resolve host names# to IP addresses; name resolve order = lmhosts host wins bcast#### Networking ##### The specific set of interfaces / networks to bind to# This can be either the interface name or an IP address/netmask;# interface names are normally preferred; interfaces = 127.0.0.0/8 eth0# Only bind to the named interfaces and/or networks; you must use the# 'interfaces' option above to use this.# It is recommended that you enable this feature if your Samba machine is# not protected by a firewall or is a firewall itself. However, this# option cannot handle dynamic or non-broadcast interfaces correctly.; bind interfaces only = true#### Debugging/Accounting ##### This tells Samba to use a separate log file for each machine# that connectslog file = /var/log/samba/log.%m# Put a capping on the size of the log files (in Kb).max log size = 1000# If you want Samba to only log through syslog then set the following# parameter to 'yes'.; syslog only = no# We want Samba to log a minimum amount of information to syslog. Everything# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log# through syslog you should set the following parameter to something higher.syslog = 0# Do something sensible when Samba crashes: mail the admin a backtracepanic action = /usr/share/samba/panic-action %d####### Authentication ######## "security = user" is always a good idea. This will require a Unix account# in this server for every user accessing the server. See# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html# in the samba-doc package for details.; security = user# You may wish to use password encryption. See the section on# 'encrypt passwords' in the smb.conf(5) manpage before enabling.encrypt passwords = yes# If you are using encrypted passwords, Samba will need to know what# password database type you are using.passdb backend = tdbsamobey pam restrictions = yes; guest account = nobody; invalid users = root# This boolean parameter controls whether Samba attempts to sync the Unix# password with the SMB password when the encrypted SMB password in the# passdb is changed.; unix password sync = no# For Unix password sync to work on a Debian GNU/Linux system, the following# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for# sending the correct chat script for the passwd program in Debian Sarge).passwd program = /usr/bin/passwd %upasswd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .# This boolean controls whether PAM will be used for password changes# when requested by an SMB client instead of the program listed in# 'passwd program'. The default is 'no'.; pam password change = no########## Domains ############ Is this machine able to authenticate users. Both PDC and BDC# must have this setting enabled. If you are the BDC you must# change the 'domain master' setting to no#; domain logons = yes## The following setting only takes effect if 'domain logons' is set# It specifies the location of the user's profile directory# from the client point of view)# The following required a [profiles] share to be setup on the# samba server (see below); logon path = \\%N\profiles\%U# Another common choice is storing the profile in the user's home directory; logon path = \\%N\%U\profile# The following setting only takes effect if 'domain logons' is set# It specifies the location of a user's home directory (from the client# point of view); logon drive = H:; logon home = \\%N\%U# The following setting only takes effect if 'domain logons' is set# It specifies the script to run during logon. The script must be stored# in the [netlogon] share# NOTE: Must be store in 'DOS' file format convention; logon script = logon.cmd# This allows Unix users to be created on the domain controller via the SAMR# RPC pipe. The example command creates a user account with a disabled Unix# password; please adapt to your needs; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u########## Printing ########### If you want to automatically load your printer list rather# than setting them up individually then you'll need this; load printers = yes# lpr(ng) printing. You may wish to override the location of the# printcap file; printing = bsd; printcap name = /etc/printcap# CUPS printing. See also the cupsaddsmb(8) manpage in the# cupsys-client package.; printing = cups; printcap name = cups# When using [print$], root is implicitly a 'printer admin', but you can# also give this right to other users to add drivers and set printer# properties; printer admin = @ntadmin############ Misc ############# Using the following line enables you to customise your configuration# on a per machine basis. The %m gets replaced with the netbios name# of the machine that is connecting; include = /home/samba/etc/smb.conf.%m# Most people will find that this option gives better performance.# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html# for details# You may want to add the following on a Linux system:# SO_RCVBUF=8192 SO_SNDBUF=8192socket options = TCP_NODELAY restrict anonymous = nodomain master = nopreferred master = nomax protocol = NTacl compatibility = winntldap ssl = Noserver signing = Auto# Un-comment the following and create the netlogon directory for Domain Logons# (you need to configure Samba to act as a domain controller too.);[netlogon]; comment = Network Logon Service; path = /home/samba/netlogon; guest ok = yes; writable = no; share modes = no# Un-comment the following and create the profiles directory to store# users profiles (see the "logon path" option above)# (you need to configure Samba to act as a domain controller too.)# The path below should be writable by all users so that their# profile directory may be created the first time they log on;[profiles]; comment = Users profiles; path = /home/samba/profiles; guest ok = no; browseable = no; create mask = 0600; directory mask = 0700[printers]comment = All Printersbrowseable = nopath = /var/spool/sambaprintable = yescreate mask = 0700# Windows clients look for this share name as a source of downloadable# printer drivers[print$]comment = Printer Driverspath = /var/lib/samba/printers[compartida]path = /home/haldrik/compartidaguest ok = yesread only = no