rendered paste body-bash-3.1# echo m > /sys/power/state
[ 88.821485] PM: Preparing system for mem sleep
[ 88.825955] Stopping tasks ... done.
[ 88.830698] Suspending console(s)
+r[ 88.834044] platform olpc-battery.0: suspend
[ 88.834066] ov7670 1-0042: suspend
[ 88.834085] ac97 0-0:AD1888: suspend
[ 88.834113] leds-olpc leds-olpc: suspend
[ 88.834156] platform dcon: suspend
[ 88.834172] OLPC-DCON 0-000d: suspend
[ 88.873503] olpc-dcon: The DCON has control
[ 88.873524] psmouse serio1: suspend
[ 88.873540] atkbd serio0: suspend
[ 88.873555] i8042 i8042: suspend
[ 88.873574] usb8xxx 1-1:1.0: suspend
[ 88.873592] usb 1-1: suspend
[ 88.873620] libertas: PREP_CMD: Val of cmd ptr=cdcce000, command=0x43
[ 88.873645] libertas: QUEUE_CMD: Inserted node=cdcdadf8, cmd=0x43 in cmdpendi
ngq
[ 88.873677] libertas: EXEC_NEXT_CMD: Got next command from cmdpendingq
[ 88.873697] libertas: EXEC_NEXT_CMD: Sending 0x0043 command
[ 88.873716] libertas: DNLD_CMD:: Before download, size of cmd = 14
[ 88.873749] libertas: DNLD_CMD: Sent command 0x43 @ 4294945230
[ 88.873774] libertas: PREP_CMD: Wait for CMD response
[ 88.874548] libertas: CMD_RESP: @ 4294945230
[ 88.874569] libertas: CMD_RESP: 8043 result: 0 length: 14
[ 88.874588] libertas: CMD_RESP: Unknown command response 0x8043
[ 88.874626] libertas: PREP_CMD: Val of cmd ptr=cdcdc800, command=0x45
[ 88.874663] libertas: QUEUE_CMD: Inserted node=cdcdac00, cmd=0x45 in cmdpendi
ngq
[ 88.874690] libertas: EXEC_NEXT_CMD: Got next command from cmdpendingq
[ 88.874708] libertas: EXEC_NEXT_CMD: Sending 0x0045 command
[ 88.874726] libertas: DNLD_CMD:: Before download, size of cmd = 8
[ 88.874752] libertas: DNLD_CMD: Sent command 0x45 @ 4294945230
[ 88.930400] hub 2-0:1.0: suspend
[ 88.930417] usb usb2: suspend, may wakeup
[ 88.930451] hub 1-0:1.0: suspend
[ 88.930467] usb usb1: suspend, may wakeup
[ 88.931123] serial8250 serial8250: suspend
[ 88.931249] platform vesafb.0: suspend
[ 88.931268] platform pcspkr: suspend
[ 88.931294] ehci_hcd 0000:00:0f.5: suspend
[ 88.951243] OLPC PCI: Config write to devfn 7d reg 44 value 3
[ 88.957961] OLPC PCI: Config write to devfn 7d reg 44 value 8000
[ 88.957985] OLPC PCI: Config write to devfn 7d reg 44 value 8000
[ 88.958005] ohci_hcd 0000:00:0f.4: suspend
[ 88.958052] OLPC PCI: Config write to devfn 7c reg 44 value 3
[ 88.964795] OLPC PCI: Config write to devfn 7c reg 44 value 8000
[ 88.964819] OLPC PCI: Config write to devfn 7c reg 44 value 8000
[ 88.964839] cs5535audio 0000:00:0f.3: suspend
[ 88.965077] pci 0000:00:0f.0: suspend
[ 88.965108] cafe1000-ccic 0000:00:0c.2: suspend
[ 88.966190] sdhci 0000:00:0c.1: suspend
[ 88.980899] CAF�É NAND 0000:00:0c.0: suspend
[ 88.980971] Geode LX AES 0000:00:01.2: suspend
[ 88.981004] lxfb 0000:00:01.1: suspend
[ 88.982186] pci 0000:00:01.0: suspend
[ 88.982219] PM: Entering mem sleep
[ 88.982235] platform olpc-battery.0: LATE suspend
[ 88.982254] leds-olpc leds-olpc: LATE suspend
[ 88.982269] platform dcon: LATE suspend
[ 88.982288] serial8250 serial8250: LATE suspend
[ 88.982314] platform vesafb.0: LATE suspend
[ 88.982329] platform pcspkr: LATE suspend
[ 88.982346] cs5535audio 0000:00:0f.3: LATE suspend
[ 88.982361] pci 0000:00:0f.0: LATE suspend
[ 88.982376] cafe1000-ccic 0000:00:0c.2: LATE suspend
[ 88.982392] sdhci 0000:00:0c.1: LATE suspend
[ 88.982407] CAF�É NAND 0000:00:0c.0: LATE suspend
[ 88.982422] Geode LX AES 0000:00:01.2: LATE suspend
[ 88.982438] pci 0000:00:01.0: LATE suspend
[ 88.982776] olpc_do_sleep!
[ 0.017083] pci 0000:00:01.0: EARLY resume
[ 0.017104] lxfb 0000:00:01.1: EARLY resume
[ 0.017120] Geode LX AES 0000:00:01.2: EARLY resume
[ 0.017136] CAF�É NAND 0000:00:0c.0: EARLY resume
[ 0.017151] sdhci 0000:00:0c.1: EARLY resume
[ 0.017167] cafe1000-ccic 0000:00:0c.2: EARLY resume
[ 0.017182] pci 0000:00:0f.0: EARLY resume
[ 0.017198] cs5535audio 0000:00:0f.3: EARLY resume
[ 0.017213] ohci_hcd 0000:00:0f.4: EARLY resume
[ 0.017229] ehci_hcd 0000:00:0f.5: EARLY resume
[ 0.017247] platform pcspkr: EARLY resume
[ 0.017262] platform vesafb.0: EARLY resume
[ 0.017296] serial8250 serial8250: EARLY resume
[ 0.017316] i8042 i8042: EARLY resume
[ 0.017330] platform dcon: EARLY resume
[ 0.017344] leds-olpc leds-olpc: EARLY resume
[ 0.017365] platform olpc-battery.0: EARLY resume
[ 0.017381] PM: Finishing wakeup.
[ 0.017400] pci 0000:00:01.0: resuming
[ 0.017432] lxfb 0000:00:01.1: resuming
[ 0.017586] Geode LX AES 0000:00:01.2: resuming
[ 0.017623] CAF�É NAND 0000:00:0c.0: resuming
[ 0.017640] sdhci 0000:00:0c.1: resuming
[ 0.149308] PM: Writing back config space on device 0000:00:0c.1 at offset f
(was 8080100, writing 808010b)
[ 0.149358] PM: Writing back config space on device 0000:00:0c.1 at offset 3
(was 800000, writing 802000)
[ 0.149389] PM: Writing back config space on device 0000:00:0c.1 at offset 1
(was 2b00002, writing 2b00006)
[ 0.155591] cafe1000-ccic 0000:00:0c.2: resuming
[ 0.155626] PM: Writing back config space on device 0000:00:0c.2 at offset f
(was 8080100, writing 808010b)
[ 0.155675] PM: Writing back config space on device 0000:00:0c.2 at offset 3
(was 800000, writing 802000)
[ 0.155706] PM: Writing back config space on device 0000:00:0c.2 at offset 1
(was 2b00002, writing 2b00006)
[ 0.182076] pci 0000:00:0f.0: resuming
[ 0.182110] cs5535audio 0000:00:0f.3: resuming
[ 0.182149] PCI: Setting latency timer of device 0000:00:0f.3 to 64
[ 0.182168] OLPC PCI: Config write to devfn 7b reg d value 40
[ 0.186511] ohci_hcd 0000:00:0f.4: resuming
[ 0.186533] OLPC PCI: Config write to devfn 7c reg 44 value 8000
[ 0.186557] OLPC PCI: Config write to devfn 7c reg 44 value 8000
[ 0.186580] OLPC PCI: Config write to devfn 7c reg 44 value 0
[ 0.188832] PCI: Setting latency timer of device 0000:00:0f.4 to 64
[ 0.188851] OLPC PCI: Config write to devfn 7c reg d value 40
[ 0.188890] ehci_hcd 0000:00:0f.5: resuming
[ 0.188911] OLPC PCI: Config write to devfn 7d reg 44 value 8000
[ 0.188934] OLPC PCI: Config write to devfn 7d reg 44 value 8000
[ 0.188957] OLPC PCI: Config write to devfn 7d reg 44 value 0
[ 0.202499] PCI: Setting latency timer of device 0000:00:0f.5 to 64
[ 0.202518] OLPC PCI: Config write to devfn 7d reg d value 40
[ 0.202555] usb usb1: root hub lost power or was reset
[ 0.202582] OLPC PCI: Config write to devfn 7d reg c value 8
[ 0.202600] PCI: cache line size of 32 is not supported by device 0000:00:0f.
5
[ 0.261654] platform pcspkr: resuming
[ 0.261671] platform vesafb.0: resuming
[ 0.261747] serial8250 serial8250: resuming
[ 0.261858] usb usb1: resuming
[ 0.282046] do_partial_probe port=1
[ 0.401270] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.519985] usb 1-1: device descriptor read/64, error -110
[ 18.745964] usb 1-1: device descriptor read/64, error -110
[ 18.855306] usb_partial_probe finished!
[ 18.877275] hub 1-0:1.0: resuming
[ 18.877292] usb usb2: resuming
[ 18.987107] hub 2-0:1.0: resuming
[ 18.987123] usb 1-1: resuming
[ 18.987141] usbdev1.2_ep00: PM: resume from 0, parent 1-1 still 2
[ 18.987162] usb8xxx 1-1:1.0: PM: resume from 2, parent 1-1 still 2
[ 18.987178] usb8xxx 1-1:1.0: resuming
[ 18.987210] usbdev1.2_ep02: PM: resume from 0, parent 1-1:1.0 still 2
[ 18.987231] usbdev1.2_ep83: PM: resume from 0, parent 1-1:1.0 still 2
[ 18.987252] usbdev1.2: PM: resume from 0, parent 1-1 still 2
[ 18.987269] i8042 i8042: resuming
[ 18.994229] atkbd serio0: resuming
[ 18.994245] psmouse serio1: resuming
[ 19.039852] OLPC-DCON 0-000d: resuming
[ 19.079481] olpc-dcon: The CPU has control
[ 19.079498] platform dcon: resuming
[ 19.079514] leds-olpc leds-olpc: resuming
[ 19.079555] msh0: PM: resume from 0, parent 1-1 still 2
[ 19.079581] ac97 0-0:AD1888: resuming
[ 19.079598] ov7670 1-0042: resuming
[ 19.079615] eth0: PM: resume from 0, parent 1-1 still 2
[ 19.079633] platform olpc-battery.0: resuming
[ 19.786158] Restarting tasks ... done.
-bash-3.1# [ 19.946981] usb 1-1: USB disconnect, address 2
[ 19.951572] PM: Removing info for No Bus:usbdev1.2_ep02
[ 19.958469] PM: Removing info for No Bus:usbdev1.2_ep83
[ 20.094527] PM: Removing info for No Bus:msh0
[ 20.204425] PM: Removing info for No Bus:eth0
[ 20.981193] libertas: Free all the array
[ 20.985145] libertas: Free all the array
[ 20.989082] libertas: Free all the array
[ 20.993129] libertas: Free all the array
[ 20.997062] libertas: Free all the array
[ 21.001102] libertas: Free all the array
[ 21.005041] libertas: Free all the array
[ 21.008974] libertas: Free all the array
[ 21.013022] libertas: Free all the array
[ 21.016954] libertas: Free all the array
[ 21.020992] libertas: Free cmd_array
[ 21.024608] PM: Removing info for usb:1-1:1.0
[ 21.029243] PM: Removing info for No Bus:usbdev1.2
[ 21.034340] PM: Removing info for No Bus:usbdev1.2_ep00
[ 21.039916] PM: Removing info for usb:1-1
[ 21.167245] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 24.295383] usb 1-1: device descriptor read/64, error -110
[ 39.521855] usb 1-1: device descriptor read/64, error -110
[ 39.751771] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 42.880834] usb 1-1: device descriptor read/64, error -110
[ 58.107304] usb 1-1: device descriptor read/64, error -110
[ 58.336734] usb 1-1: new high speed USB device using ehci_hcd and address 5