[sanei_debug] Setting debug level of sanei_pa4s2 to 128.
[sanei_pa4s2] sanei_pa4s2: interface called for the first time
[sanei_pa4s2] sanei_pa4s2_devices: invoked
[sanei_pa4s2] pa4s2_init: static int first_time = 1
[sanei_pa4s2] pa4s2_init: called for the first time
[sanei_pa4s2] pa4s2_init: initializing libieee1284
[sanei_pa4s2] pa4s2_init: 3 ports reported by IEEE 1284 library
[sanei_pa4s2] pa4s2_init: port 0 is `0x278`
[sanei_pa4s2] pa4s2_init: port 1 is `0x378`
[sanei_pa4s2] pa4s2_init: port 2 is `0x3bc`
[sanei_pa4s2] pa4s2_init: allocating port list
[sanei_pa4s2] pa4s2_init: initialized successfully
[sanei_pa4s2] sanei_pa4s2_open: called for device '0x278'
[sanei_pa4s2] sanei_pa4s2_open: trying to connect to port
[sanei_pa4s2] pa4s2_open: trying to attach dev `0x278`
[sanei_pa4s2] pa4s2_init: static int first_time = 0
[sanei_pa4s2] pa4s2_init: sanei already initalized
[sanei_pa4s2] pa4s2_open: looking up port in list
[sanei_pa4s2] pa4s2_open: port is in list at port[0]
[sanei_pa4s2] pa4s2_open: setting up port data
[sanei_pa4s2] pa4s2_open: name=0x278 in_use=SANE_TRUE
[sanei_pa4s2] pa4s2_open: enabled=SANE_FALSE mode=PA4S2_MODE_NIB
[sanei_pa4s2] pa4s2_open: opening device
[sanei_pa4s2] pa4s2_open: could not open device `0x278` (Error initializing port)
[sanei_pa4s2] pa4s2_open: marking port 0 as unused
[sanei_pa4s2] sanei_pa4s2_open: connection failed
[sanei_pa4s2] sanei_pa4s2_open: called for device 'parport1'
[sanei_pa4s2] sanei_pa4s2_open: trying to connect to port
[sanei_pa4s2] pa4s2_open: trying to attach dev `parport1`
[sanei_pa4s2] pa4s2_init: static int first_time = 0
[sanei_pa4s2] pa4s2_init: sanei already initalized
[sanei_pa4s2] pa4s2_open: looking up port in list
[sanei_pa4s2] pa4s2_open: `parport1` is not a valid device name
[sanei_pa4s2] pa4s2_open: returning SANE_STATUS_INVAL
[sanei_pa4s2] sanei_pa4s2_open: connection failed
[sanei_pa4s2] sanei_pa4s2_open: called for device '0x378'
[sanei_pa4s2] sanei_pa4s2_open: trying to connect to port
[sanei_pa4s2] pa4s2_open: trying to attach dev `0x378`
[sanei_pa4s2] pa4s2_init: static int first_time = 0
[sanei_pa4s2] pa4s2_init: sanei already initalized
[sanei_pa4s2] pa4s2_open: looking up port in list
[sanei_pa4s2] pa4s2_open: port is in list at port[1]
[sanei_pa4s2] pa4s2_open: setting up port data
[sanei_pa4s2] pa4s2_open: name=0x378 in_use=SANE_TRUE
[sanei_pa4s2] pa4s2_open: enabled=SANE_FALSE mode=PA4S2_MODE_NIB
[sanei_pa4s2] pa4s2_open: opening device
[sanei_pa4s2] pa4s2_open: could not open device `0x378` (Error initializing port)
[sanei_pa4s2] pa4s2_open: marking port 1 as unused
[sanei_pa4s2] sanei_pa4s2_open: connection failed
[sanei_pa4s2] sanei_pa4s2_open: called for device 'parport0'
[sanei_pa4s2] sanei_pa4s2_open: trying to connect to port
[sanei_pa4s2] pa4s2_open: trying to attach dev `parport0`
[sanei_pa4s2] pa4s2_init: static int first_time = 0
[sanei_pa4s2] pa4s2_init: sanei already initalized
[sanei_pa4s2] pa4s2_open: looking up port in list
[sanei_pa4s2] pa4s2_open: `parport0` is not a valid device name
[sanei_pa4s2] pa4s2_open: returning SANE_STATUS_INVAL
[sanei_pa4s2] sanei_pa4s2_open: connection failed
[sanei_pa4s2] sanei_pa4s2_open: called for device '0x3bc'
[sanei_pa4s2] sanei_pa4s2_open: trying to connect to port
[sanei_pa4s2] pa4s2_open: trying to attach dev `0x3bc`
[sanei_pa4s2] pa4s2_init: static int first_time = 0
[sanei_pa4s2] pa4s2_init: sanei already initalized
[sanei_pa4s2] pa4s2_open: looking up port in list
[sanei_pa4s2] pa4s2_open: port is in list at port[2]
[sanei_pa4s2] pa4s2_open: setting up port data
[sanei_pa4s2] pa4s2_open: name=0x3bc in_use=SANE_TRUE
[sanei_pa4s2] pa4s2_open: enabled=SANE_FALSE mode=PA4S2_MODE_NIB
[sanei_pa4s2] pa4s2_open: opening device
[sanei_pa4s2] pa4s2_open: could not open device `0x3bc` (Error initializing port)
[sanei_pa4s2] pa4s2_open: marking port 2 as unused
[sanei_pa4s2] sanei_pa4s2_open: connection failed
[sanei_debug] Setting debug level of sanei_pa4s2 to 128.
[sanei_pa4s2] sanei_pa4s2: interface called for the first time
[sanei_pa4s2] sanei_pa4s2_scsi_pp_open: called for device '/dev/scanner'
[sanei_pa4s2] sanei_pa4s2_scsi_pp_open: trying to connect to port
[sanei_pa4s2] pa4s2_open: trying to attach dev `/dev/scanner`
[sanei_pa4s2] pa4s2_init: static int first_time = 1
[sanei_pa4s2] pa4s2_init: called for the first time
[sanei_pa4s2] pa4s2_init: initializing libieee1284
[sanei_pa4s2] pa4s2_init: 3 ports reported by IEEE 1284 library
[sanei_pa4s2] pa4s2_init: port 0 is `0x278`
[sanei_pa4s2] pa4s2_init: port 1 is `0x378`
[sanei_pa4s2] pa4s2_init: port 2 is `0x3bc`
[sanei_pa4s2] pa4s2_init: allocating port list
[sanei_pa4s2] pa4s2_init: initialized successfully
[sanei_pa4s2] pa4s2_open: looking up port in list
[sanei_pa4s2] pa4s2_open: `/dev/scanner` is not a valid device name
[sanei_pa4s2] pa4s2_open: returning SANE_STATUS_INVAL
[sanei_pa4s2] sanei_pa4s2_scsi_pp_open: connection failed