rendered paste body[root@asterisk1 etc]# ztcfg -vvvv
Zaptel Configuration
======================
Channel map:
0 channels configured.
[root@asterisk1 etc]# cat /etc/zaptel.conf
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: ZTDUMMY/1 "ZTDUMMY/1 1"
# Global data
loadzone = us
defaultzone = us
[root@asterisk1 ~]# dmesg
Linux version 2.6.9-34.0.2.EL (buildcentos@v20z-i386) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Fri Jul 7 19:24:57 CDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f740000 (usable)
BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data)
BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS)
0MB HIGHMEM available.
503MB LOWMEM available.
Using x86 segment limits to approximate NX protection
zapping low mappings.
On node 0 totalpages: 128832
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 124736 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f7170
ACPI: RSDT (v001 INTEL D845GRG 0x20030226 MSFT 0x00000097) @ 0x1f740000
ACPI: FADT (v002 INTEL D845GRG 0x20030226 MSFT 0x00000097) @ 0x1f740200
ACPI: MADT (v001 INTEL D845GRG 0x20030226 MSFT 0x00000097) @ 0x1f740300
ACPI: ASF! (v016 AMIASF I845GASF 0x00000001 MSFT 0x0100000d) @ 0x1f744350
ACPI: DSDT (v001 INTEL D845GRG 0x0000010a MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 acpi=off noapic
Initializing CPU#0
CPU 0 irqstacks, hard=c03e7000 soft=c03e6000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2800.295 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 506424k/515328k available (2118k kernel code, 8252k reserved, 668k data, 144k init, 0k highmem)
Calibrating delay using timer specific routine.. 5605.55 BogoMIPS (lpj=2802776)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 389k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:00:1f.1
PCI: Sharing IRQ 9 with 0000:00:1d.2
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1181442177.484:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 1D846148DE22BD48
- User ID: CentOS (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
PCI: Found IRQ 9 for device 0000:00:1f.1
PCI: Sharing IRQ 9 with 0000:00:1d.2
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: Maxtor 6E040L0, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 144k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
inserting floppy driver for 2.6.9-34.0.2.EL
floppy0: no floppy controllers found
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 11 for device 0000:01:08.0
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xff8fe000, irq 11, MAC addr 00:03:47:27:93:E3
hw_random hardware driver 1.0.0 loaded
PCI: Found IRQ 10 for device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem e001cc00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:00:02.0
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0000e800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 5 for device 0000:00:1d.1
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 5, io base 0000e880
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.2
PCI: Sharing IRQ 9 with 0000:00:1f.1
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 9, io base 0000ec00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on hda2, internal journal
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 779144k swap on /dev/hda3. Priority:-1 extents:1
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 updated from revision 0x0 to 0x2e, date = 08112004
IA-32 Microcode Update Driver v1.14 unregistered
Zapata Telephony Interface Registered on major 196
Zaptel Version: Echo Canceller: KB1
Registered Tormenta2 PCI
PCI: Found IRQ 7 for device 0000:01:01.0
Freshmaker version: 71
Freshmaker passed register test
Timeout waiting for calibration of module 0
Timeout waiting for calibration of module 0
Proslic Failed on Second Attempt to Auto Calibrate
Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION in Makefile)
Module 0: FAILED FXS (FCC)
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
wctdm: probe of 0000:01:01.0 failed with error -5
Registered tone zone 0 (United States / North America)
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
i2c /dev entries driver
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0378f60(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
Registered tone zone 0 (United States / North America)
Unregistered Tormenta2
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
Zaptel Version: Echo Canceller: KB1
Registered Tormenta2 PCI
PCI: Found IRQ 7 for device 0000:01:01.0
Freshmaker version: 71
Freshmaker passed register test
Timeout waiting for calibration of module 0
Timeout waiting for calibration of module 0
Proslic Failed on Second Attempt to Auto Calibrate
Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION in Makefile)
Module 0: FAILED FXS (FCC)
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
wctdm: probe of 0000:01:01.0 failed with error -5
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Unregistered Tormenta2
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
Zaptel Version: Echo Canceller: KB1
Registered Tormenta2 PCI
PCI: Found IRQ 7 for device 0000:01:01.0
Freshmaker version: 71
Freshmaker passed register test
Timeout waiting for calibration of module 0
Timeout waiting for calibration of module 0
Proslic Failed on Second Attempt to Auto Calibrate
Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION in Makefile)
Module 0: FAILED FXS (FCC)
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
wctdm: probe of 0000:01:01.0 failed with error -5
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)
Unregistered Tormenta2
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
Zaptel Version: Echo Canceller: KB1
Registered Tormenta2 PCI
PCI: Found IRQ 7 for device 0000:01:01.0
Freshmaker version: 71
Freshmaker passed register test
Timeout waiting for calibration of module 0
Timeout waiting for calibration of module 0
Proslic Failed on Second Attempt to Auto Calibrate
Proslic Failed on Second Attempt to Calibrate Manually. (Try -DNO_CALIBRATION in Makefile)
Module 0: FAILED FXS (FCC)
Module 1: Not installed
Module 2: Not installed
Module 3: Not installed
wctdm: probe of 0000:01:01.0 failed with error -5
Registered tone zone 0 (United States / North America)
Registered tone zone 0 (United States / North America)