rendered paste body[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000eac00 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[17179569.184000] BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data)
[17179569.184000] BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 255MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 65520
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 61424 pages, LIFO batch:15
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6a90
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0fffced4
[17179569.184000] ACPI: FADT (v001 COMPAL N32NC 0x06040000 PTL 0x00000001) @ 0x0ffffb65
[17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0ffffbd9
[17179569.184000] ACPI: DSDT (v001 Compal 32NC 0x06040000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: BIOS age (1992) fails cutoff (2000), acpi=force is required to enable ACPI
[17179569.184000] ACPI: Disabling ACPI support
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash pci=assign-busses
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (0120a000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 597.513 MHz processor.
[ 15.004945] Using tsc for high-res timesource
[ 15.006591] Console: colour VGA+ 80x25
[ 15.007128] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.007671] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 15.036538] Memory: 249960k/262080k available (1910k kernel code, 11556k reserved, 1070k data, 308k init, 0k highmem)
[ 15.036552] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.116775] Calibrating delay using timer specific routine.. 1196.64 BogoMIPS (lpj=2393299)
[ 15.116895] Security Framework v1.0.0 initialized
[ 15.116914] SELinux: Disabled at boot.
[ 15.116963] Mount-cache hash table entries: 512
[ 15.117323] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 15.117346] CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 15.117376] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 15.117385] CPU: L2 cache: 256K
[ 15.117393] CPU serial number disabled.
[ 15.117401] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 15.117456] Checking 'hlt' instruction... OK.
[ 15.132949] SMP alternatives: switching to UP code
[ 15.133224] Freeing SMP alternatives: 16k freed
[ 15.133604] checking if image is initramfs... it is
[ 16.751699] Freeing initrd memory: 5523k freed
[ 16.751720] CPU0: Intel Pentium III (Coppermine) stepping 06
[ 16.751737] SMP motherboard not detected.
[ 16.751746] Local APIC not detected. Using dummy APIC emulation.
[ 16.751994] Brought up 1 CPUs
[ 16.752049] migration_cost=0
[ 16.752977] NET: Registered protocol family 16
[ 16.753067] EISA bus registered
[ 16.764489] PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1
[ 16.764508] PCI: Using configuration type 1
[ 16.764515] Setting up standard PCI resources
[ 16.768294] ACPI: Interpreter disabled.
[ 16.768307] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.768330] pnp: PnP ACPI: disabled
[ 16.768343] PnPBIOS: Scanning system for PnP BIOS support...
[ 16.768395] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6b00
[ 16.768406] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9d79, dseg 0x400
[ 16.774776] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 16.774922] PCI: Probing PCI hardware
[ 16.774934] PCI: Probing PCI hardware (bus 00)
[ 16.775368] PCI: Ignoring BAR0-3 of IDE controller 0000:00:07.1
[ 16.775500] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[ 16.775511] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[ 16.775526] PIIX4 devres E PIO at 0378-037f
[ 16.775536] PIIX4 devres G PIO at 002e-002f
[ 16.776015] Boot video device is 0000:01:01.0
[ 16.777711] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 16.777741] PCI: Found IRQ 11 for device 0000:00:04.0
[ 16.777754] PCI: Sharing IRQ 11 with 0000:00:04.1
[ 16.777773] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 16.780143] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 16.780154] pnp: 00:0a: ioport range 0x1000-0x103f has been reserved
[ 16.780165] pnp: 00:0a: ioport range 0x1040-0x104f has been reserved
[ 16.780856] PCI: Bridge: 0000:00:01.0
[ 16.780864] IO window: disabled.
[ 16.780875] MEM window: f0000000-f7ffffff
[ 16.780885] PREFETCH window: 28000000-280fffff
[ 16.780896] PCI: Bus 2, cardbus bridge: 0000:00:04.0
[ 16.780905] IO window: 00001c00-00001cff
[ 16.780914] IO window: 00002000-000020ff
[ 16.780924] PREFETCH window: 20000000-21ffffff
[ 16.780934] MEM window: 22000000-23ffffff
[ 16.780944] PCI: Bus 6, cardbus bridge: 0000:00:04.1
[ 16.780951] IO window: 00002400-000024ff
[ 16.780961] IO window: 00002800-000028ff
[ 16.780971] PREFETCH window: 24000000-25ffffff
[ 16.780981] MEM window: 26000000-27ffffff
[ 16.781018] PCI: Found IRQ 11 for device 0000:00:04.0
[ 16.781032] PCI: Sharing IRQ 11 with 0000:00:04.1
[ 16.781050] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 16.781061] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 16.781084] PCI: Found IRQ 11 for device 0000:00:04.1
[ 16.781096] PCI: Sharing IRQ 11 with 0000:00:04.0
[ 16.781115] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 16.781125] PCI: Setting latency timer of device 0000:00:04.1 to 64
[ 16.781200] NET: Registered protocol family 2
[ 16.820007] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 16.820291] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 16.820522] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 16.820642] TCP: Hash tables configured (established 8192 bind 4096)
[ 16.820652] TCP reno registered
[ 16.821136] Simple Boot Flag at 0x38 set to 0x1
[ 16.822693] audit: initializing netlink socket (disabled)
[ 16.822730] audit(1181514179.004:1): initialized
[ 16.823156] VFS: Disk quotas dquot_6.5.1
[ 16.823225] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.823387] Initializing Cryptographic API
[ 16.823402] io scheduler noop registered
[ 16.823423] io scheduler anticipatory registered
[ 16.823448] io scheduler deadline registered
[ 16.823491] io scheduler cfq registered (default)
[ 16.823507] Limiting direct PCI/PCI transfers.
[ 16.824143] isapnp: Scanning for PnP cards...
[ 17.178506] isapnp: No Plug & Play device found
[ 17.256843] Real Time Clock Driver v1.12ac
[ 17.257051] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.257281] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.259149] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.259972] mice: PS/2 mouse device common for all mice
[ 17.261712] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.262349] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 17.262362] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 17.262855] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 17.274991] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.276046] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.277824] EISA: Probing bus 0 at eisa.0
[ 17.277848] Cannot allocate resource for EISA slot 1
[ 17.277858] Cannot allocate resource for EISA slot 2
[ 17.277902] EISA: Detected 0 cards.
[ 17.278599] TCP bic registered
[ 17.278629] NET: Registered protocol family 1
[ 17.278649] NET: Registered protocol family 8
[ 17.278656] NET: Registered protocol family 20
[ 17.278721] Using IPI No-Shortcut mode
[ 17.279984] Freeing unused kernel memory: 308k freed
[ 17.316753] input: AT Translated Set 2 keyboard as /class/input/input0
[ 18.583138] Capability LSM initialized
[ 19.957194] PIIX4: IDE controller at PCI slot 0000:00:07.1
[ 19.957228] PIIX4: chipset revision 1
[ 19.957235] PIIX4: not 100% native mode: will probe irqs later
[ 19.957255] ide0: BM-DMA at 0x1050-0x1057, BIOS settings: hda:DMA, hdb:pio
[ 19.957283] ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:pio
[ 19.957303] Probing IDE interface ide0...
[ 20.245966] hda: FUJITSU MHT2040AT, ATA DISK drive
[ 20.918804] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 20.919363] Probing IDE interface ide1...
[ 21.653150] hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
[ 22.335652] ide1 at 0x170-0x177,0x376 on irq 15
[ 22.355775] hda: max request size: 128KiB
[ 22.391899] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[ 22.393664] hda: cache flushes supported
[ 22.393783] hda: hda1 hda2 < hda5 >
[ 22.486958] hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
[ 22.486983] Uniform CD-ROM driver Revision: 3.20
[ 22.904876] usbcore: registered new driver usbfs
[ 22.904944] usbcore: registered new driver hub
[ 22.909153] USB Universal Host Controller Interface driver v3.0
[ 22.909264] PCI: Found IRQ 5 for device 0000:00:07.2
[ 22.909312] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 22.909588] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 22.909634] uhci_hcd 0000:00:07.2: irq 5, io base 0x00001060
[ 22.909876] usb usb1: configuration #1 chosen from 1 choice
[ 22.909949] hub 1-0:1.0: USB hub found
[ 22.909973] hub 1-0:1.0: 2 ports detected
[ 23.114498] Attempting manual resume
[ 23.155072] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 23.155086] EXT3-fs: write access will be enabled during recovery.
[ 25.490290] kjournald starting. Commit interval 5 seconds
[ 25.490337] EXT3-fs: recovery complete.
[ 25.491352] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.131763] Linux agpgart interface v0.101 (c) Dave Jones
[ 41.194275] agpgart: Detected an Intel 440BX Chipset.
[ 41.198936] agpgart: AGP aperture is 64M @ 0xf8000000
[ 41.241215] input: PC Speaker as /class/input/input1
[ 41.686721] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 41.703867] PCI: Found IRQ 11 for device 0000:00:04.0
[ 41.703888] PCI: Sharing IRQ 11 with 0000:00:04.1
[ 41.703909] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 41.703929] Yenta: CardBus bridge found at 0000:00:04.0 [103c:0014]
[ 41.703951] Yenta: Enabling burst memory read transactions
[ 41.703961] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 41.703968] Yenta: Routing CardBus interrupts to PCI
[ 41.703979] Yenta TI: socket 0000:00:04.0, mfunc 0x01ac1b22, devctl 0x66
[ 41.934057] Yenta: ISA IRQ mask 0x0698, PCI irq 11
[ 41.934069] Socket status: 30000006
[ 41.946674] PCI: Found IRQ 11 for device 0000:00:04.1
[ 41.946692] PCI: Sharing IRQ 11 with 0000:00:04.0
[ 41.946714] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 41.946738] Yenta: CardBus bridge found at 0000:00:04.1 [103c:0014]
[ 41.946762] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 41.946770] Yenta: Routing CardBus interrupts to PCI
[ 41.946781] Yenta TI: socket 0000:00:04.1, mfunc 0x01ac1b22, devctl 0x66
[ 42.177916] Yenta: ISA IRQ mask 0x0698, PCI irq 11
[ 42.177928] Socket status: 30000006
[ 42.733808] PCI: Found IRQ 5 for device 0000:00:08.0
[ 42.733839] PCI: Sharing IRQ 5 with 0000:00:08.1
[ 43.222058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 43.428848] Floppy drive(s): fd0 is 1.44M
[ 43.448289] FDC 0 is a post-1991 82077
[ 43.586389] parport: PnPBIOS parport detected.
[ 43.586460] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 43.725582] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.044291] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0
[ 44.108629] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 44.314669] ts: Compaq touchscreen protocol output
[ 45.584192] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 45.586266] cs: IO port probe 0x3e0-0x4ff: clean.
[ 45.587154] cs: IO port probe 0x820-0x8ff: clean.
[ 45.587946] cs: IO port probe 0xc00-0xcf7: clean.
[ 45.588992] cs: IO port probe 0xa00-0xaff: clean.
[ 45.591122] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 45.593232] cs: IO port probe 0x3e0-0x4ff: clean.
[ 45.594119] cs: IO port probe 0x820-0x8ff: clean.
[ 45.594882] cs: IO port probe 0xc00-0xcf7: clean.
[ 45.595959] cs: IO port probe 0xa00-0xaff: clean.
[ 45.828259] lp0: using parport0 (interrupt-driven).
[ 45.909784] Adding 746980k swap on /dev/disk/by-uuid/1992423c-9b17-427e-9cc3-85f8f43c1549. Priority:-1 extents:1 across:746980k
[ 46.019445] EXT3 FS on hda1, internal journal
[ 47.997926] NET: Registered protocol family 17
[ 60.779842] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 78.768299] Bluetooth: Core ver 2.8
[ 78.768317] NET: Registered protocol family 31
[ 78.768323] Bluetooth: HCI device and connection manager initialized
[ 78.768361] Bluetooth: HCI socket layer initialized
[ 78.883047] Bluetooth: L2CAP ver 2.8
[ 78.883062] Bluetooth: L2CAP socket layer initialized
[ 78.947337] Bluetooth: RFCOMM socket layer initialized
[ 78.947379] Bluetooth: RFCOMM TTY layer initialized
[ 78.947387] Bluetooth: RFCOMM ver 1.7
[ 128.207668] pccard: CardBus card inserted into slot 1
[ 128.888492] Linux Tulip driver version 1.1.14 (May 6, 2006)
[ 128.889819] PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
[ 128.890121] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 128.890853] tulip0: MII transceiver #1 config 3100 status 7849 advertising 05e1.
[ 128.900110] eth0: ADMtek Comet rev 17 at Port 0x2400, 00:18:4D:6E:DF:B4, IRQ 11.
[ 133.242612] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
[ 133.242641] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1.
[ 150.779558] NET: Registered protocol family 10
[ 150.779864] lo: Disabled Privacy Extensions
[ 150.780300] IPv6 over IPv4 tunneling driver
[ 161.180616] eth1: no IPv6 routers present
[ 163.446701] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff)
[ 163.448135] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff)
[ 163.448164] pccard: card ejected from slot 1
[ 163.455818] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff)
[ 163.457763] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff)
[ 163.484884] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xffffffff CSR6 0xffffffff)
[ 176.287954] pccard: CardBus card inserted into slot 1
[ 176.289236] PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
[ 176.289292] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 176.289998] tulip1: MII transceiver #1 config 3100 status 7849 advertising 05e1.
[ 176.297990] eth0: ADMtek Comet rev 17 at Port 0x2400, 00:18:4D:6E:DF:B4, IRQ 11.
[ 180.331494] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
[ 180.331521] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1.
[ 188.109113] eth1: no IPv6 routers present