rendered paste body[ 0.000000] ACPI: BOOT (v001 DELL M07 0x27d70402 ASL 0x00000061) @ 0x3fed4bc0
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x3fed3a4f
[ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] Detected 1828.818 MHz processor.
[ 7.275558] Built 1 zonelists. Total pages: 259798
[ 7.275562] Kernel command line: root=UUID=3487b728-0c32-4d41-b3bb-1ffde78b59d7 ro quiet splash
[ 7.275707] mapped APIC to ffffd000 (fee00000)
[ 7.275709] mapped IOAPIC to ffffc000 (fec00000)
[ 7.275712] Enabling fast FPU save and restore... done.
[ 7.275715] Enabling unmasked SIMD FPU exception support... done.
[ 7.275721] Initializing CPU#0
[ 7.275783] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 7.277957] Console: colour VGA+ 80x25
[ 7.278210] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 7.278552] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 7.302114] Memory: 1027188k/1047372k available (1992k kernel code, 19512k reserved, 900k data, 328k init, 129868k highmem)
[ 7.302122] virtual kernel memory layout:
[ 7.302123] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 7.302125] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 7.302126] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 7.302127] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 7.302128] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 7.302129] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 7.302131] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 7.302134] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 7.302274] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 7.302279] hpet0: 3 64-bit timers, 14318180 Hz
[ 7.303283] Using HPET for base-timer
[ 7.382143] Calibrating delay using timer specific routine.. 3661.40 BogoMIPS (lpj=7322817)
[ 7.382178] Security Framework v1.0.0 initialized
[ 7.382185] SELinux: Disabled at boot.
[ 7.382199] Mount-cache hash table entries: 512
[ 7.382315] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[ 7.382323] monitor/mwait feature present.
[ 7.382325] using mwait in idle threads.
[ 7.382328] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 7.382331] CPU: L2 cache: 2048K
[ 7.382333] CPU: Physical Processor ID: 0
[ 7.382335] CPU: Processor Core ID: 0
[ 7.382337] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[ 7.382345] Compat vDSO mapped to ffffe000.
[ 7.382348] Remapping vsyscall page to ffffe000
[ 7.382359] Checking 'hlt' instruction... OK.
[ 7.398206] SMP alternatives: switching to UP code
[ 7.398517] Early unpacking initramfs... done
[ 7.709189] ACPI: Core revision 20060707
[ 7.725569] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 7.728272] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 7.728290] SMP alternatives: switching to SMP code
[ 7.728394] Booting processor 1/1 eip 3000
[ 9.521697] Initializing CPU#1
[ 9.602330] Calibrating delay using timer specific routine.. 3657.61 BogoMIPS (lpj=7315223)
[ 9.602336] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[ 9.602341] monitor/mwait feature present.
[ 9.602345] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 9.602346] CPU: L2 cache: 2048K
[ 9.602349] CPU: Physical Processor ID: 0
[ 9.602350] CPU: Processor Core ID: 1
[ 9.602352] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[ 7.821909] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[ 7.821930] Total of 2 processors activated (7319.02 BogoMIPS).
[ 7.822127] ENABLING IO-APIC IRQs
[ 7.822323] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 7.969150] checking TSC synchronization across 2 CPUs:
[ 0.000001] CPU#0 had -892336 usecs TSC skew, fixed it up.
[ 0.000003] CPU#1 had 892336 usecs TSC skew, fixed it up.
[ 0.003996] Brought up 2 CPUs
[ 0.240391] migration_cost=61
[ 0.240654] Booting paravirtualized kernel on bare hardware
[ 0.240739] Time: 22:13:53 Date: 05/10/107
[ 0.240766] NET: Registered protocol family 16
[ 0.240843] EISA bus registered
[ 0.240848] ACPI: bus type pci registered
[ 0.269174] PCI: PCI BIOS revision 2.10 entry at 0xfb316, last bus=14
[ 0.269176] PCI: Using configuration type 1
[ 0.269178] Setting up standard PCI resources
[ 0.296291] ACPI: Interpreter enabled
[ 0.296293] ACPI: Using IOAPIC for interrupt routing
[ 0.297164] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.297172] PCI: Probing PCI hardware (bus 00)
[ 0.297363] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.310980] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.310985] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.311192] Boot video device is 0000:01:00.0
[ 0.311921] PCI: Transparent bridge - 0000:00:1e.0
[ 0.312002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.332764] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4
[ 0.333017] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7)
[ 0.333261] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[ 0.333505] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
[ 0.333756] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.334014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.334269] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.334522] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.334955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.336051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.336301] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.336531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.336829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.337246] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.337253] pnp: PnP ACPI init
[ 0.369905] pnp: PnP ACPI: found 12 devices
[ 0.369909] PnPBIOS: Disabled by ACPI PNP
[ 0.369949] PCI: Using ACPI for IRQ routing
[ 0.369952] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.404861] NET: Registered protocol family 8
[ 0.404863] NET: Registered protocol family 20
[ 0.423349] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.423353] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
[ 0.423356] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
[ 0.423363] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.423366] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 0.423369] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 0.423371] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 0.423374] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.423377] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.423383] pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
[ 0.423386] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 0.423388] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 0.423391] pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved
[ 0.423393] pnp: 00:08: ioport range 0x930-0x97f has been reserved
[ 0.423663] PCI: Bridge: 0000:00:01.0
[ 0.423666] IO window: e000-efff
[ 0.423669] MEM window: ed000000-efefffff
[ 0.423673] PREFETCH window: d0000000-dfffffff
[ 0.423676] PCI: Bridge: 0000:00:1c.0
[ 0.423677] IO window: disabled.
[ 0.423683] MEM window: disabled.
[ 0.423687] PREFETCH window: disabled.
[ 0.423693] PCI: Bridge: 0000:00:1c.1
[ 0.423694] IO window: disabled.
[ 0.423700] MEM window: ecf00000-ecffffff
[ 0.423704] PREFETCH window: disabled.
[ 0.423709] PCI: Bridge: 0000:00:1c.3
[ 0.423712] IO window: d000-dfff
[ 0.423718] MEM window: ecc00000-ecefffff
[ 0.423723] PREFETCH window: e0000000-e01fffff
[ 0.423728] PCI: Bridge: 0000:00:1e.0
[ 0.423730] IO window: disabled.
[ 0.423736] MEM window: ecb00000-ecbfffff
[ 0.423740] PREFETCH window: disabled.
[ 0.423756] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.423761] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.423782] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.423788] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.423811] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.423817] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.423839] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 0.423845] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.423858] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.423885] NET: Registered protocol family 2
[ 0.471241] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.471341] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.472002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.472342] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.472344] TCP reno registered
[ 0.487290] checking if image is initramfs... it is
[ 1.094996] Freeing initrd memory: 6786k freed
[ 1.095162] Simple Boot Flag at 0x79 set to 0x1
[ 1.095583] audit: initializing netlink socket (disabled)
[ 1.095598] audit(1181513633.844:1): initialized
[ 1.095688] highmem bounce pool size: 64 pages
[ 1.095772] VFS: Disk quotas dquot_6.5.1
[ 1.095791] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.095838] io scheduler noop registered
[ 1.095840] io scheduler anticipatory registered
[ 1.095842] io scheduler deadline registered
[ 1.095854] io scheduler cfq registered (default)
[ 1.096068] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.096101] assign_interrupt_mode Found MSI capability
[ 1.096103] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.096184] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.096239] assign_interrupt_mode Found MSI capability
[ 1.096242] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.096274] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.096390] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.096445] assign_interrupt_mode Found MSI capability
[ 1.096448] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.096477] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.096591] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.096647] assign_interrupt_mode Found MSI capability
[ 1.096649] Allocate Port Service[0000:00:1c.3:pcie00]
[ 1.096677] Allocate Port Service[0000:00:1c.3:pcie02]
[ 1.096843] isapnp: Scanning for PnP cards...
[ 1.450047] isapnp: No Plug & Play device found
[ 1.471282] Real Time Clock Driver v1.12ac
[ 1.471342] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.471906] mice: PS/2 mouse device common for all mice
[ 1.472413] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.472622] input: Macintosh mouse button emulation as /class/input/input0
[ 1.472657] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.472660] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.472886] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.475713] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.475716] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.475868] EISA: Probing bus 0 at eisa.0
[ 1.475879] Cannot allocate resource for EISA slot 1
[ 1.475909] EISA: Detected 0 cards.
[ 1.506031] TCP cubic registered
[ 1.506042] NET: Registered protocol family 1
[ 1.506064] Starting balanced_irq
[ 1.506070] Using IPI No-Shortcut mode
[ 1.506184] ACPI: (supports S0 S3 S4 S5)
[ 1.506228] Magic number: 11:253:249
[ 1.506250] hash matches device ttyw5
[ 1.506488] Freeing unused kernel memory: 328k freed
[ 1.507291] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.509454] Time: tsc clocksource has been installed.
[ 2.698056] Capability LSM initialized
[ 2.731557] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 2.731734] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 2.731933] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.731938] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.732352] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 2.732514] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 2.732756] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.732760] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.304000] ACPI: Thermal Zone [THM] (51 C)
[ 3.308000] Time: hpet clocksource has been installed.
[ 3.620000] usbcore: registered new interface driver usbfs
[ 3.620000] usbcore: registered new interface driver hub
[ 3.620000] usbcore: registered new device driver usb
[ 3.620000] USB Universal Host Controller Interface driver v3.0
[ 3.620000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 3.620000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.620000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.620000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.620000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80
[ 3.620000] usb usb1: configuration #1 chosen from 1 choice
[ 3.620000] hub 1-0:1.0: USB hub found
[ 3.620000] hub 1-0:1.0: 2 ports detected
[ 3.724000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 3.724000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.724000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.724000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.724000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60
[ 3.724000] usb usb2: configuration #1 chosen from 1 choice
[ 3.724000] hub 2-0:1.0: USB hub found
[ 3.724000] hub 2-0:1.0: 2 ports detected
[ 3.828000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
[ 3.828000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.828000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.828000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.828000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
[ 3.828000] usb usb3: configuration #1 chosen from 1 choice
[ 3.828000] hub 3-0:1.0: USB hub found
[ 3.828000] hub 3-0:1.0: 2 ports detected
[ 3.932000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
[ 3.932000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.932000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.932000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.932000] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
[ 3.932000] usb usb4: configuration #1 chosen from 1 choice
[ 3.932000] hub 4-0:1.0: USB hub found
[ 3.932000] hub 4-0:1.0: 2 ports detected
[ 3.964000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 4.036000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 4.036000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.036000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.036000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.036000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.036000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.036000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
[ 4.040000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.040000] usb usb5: configuration #1 chosen from 1 choice
[ 4.040000] hub 5-0:1.0: USB hub found
[ 4.040000] hub 5-0:1.0: 8 ports detected
[ 4.044000] SCSI subsystem initialized
[ 4.052000] libata version 2.20 loaded.
[ 4.144000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 4.144000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.144000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 4.144000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.144000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 4.144000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 4.144000] scsi0 : ata_piix
[ 4.308000] ata1.00: ata_hpa_resize 1: sectors = 153356490, hpa_sectors = 156301488
[ 4.308000] ata1.00: Host Protected Area detected.
[ 4.308000] current size : 153356490 sectors (78518 MB)
[ 4.308000] native size : 156301488 sectors (80026 MB)
[ 4.308000] ata1.00: SET of native returned 0, expected 156301488
[ 4.308000] ata1.00: ATA-6: TOSHIBA MK8032GSX, AS112D, max UDMA/100
[ 4.308000] ata1.00: 153356490 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.316000] ata1.00: ata_hpa_resize 1: sectors = 153356490, hpa_sectors = 156301488
[ 4.316000] ata1.00: Host Protected Area detected.
[ 4.316000] current size : 153356490 sectors (78518 MB)
[ 4.316000] native size : 156301488 sectors (80026 MB)
[ 4.316000] ata1.00: SET of native returned 0, expected 156301488
[ 4.316000] ata1.00: configured for UDMA/100
[ 4.316000] scsi1 : ata_piix
[ 4.488000] usb 1-1: device not accepting address 2, error -71
[ 4.700000] ata2.00: ATAPI, max UDMA/33
[ 4.784000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 4.888000] ata2.00: configured for UDMA/33
[ 4.888000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GS AS11 PQ: 0 ANSI: 5
[ 4.892000] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L532B DE04 PQ: 0 ANSI: 5
[ 4.896000] b44.c:v1.01 (Jun 16, 2006)
[ 4.896000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 4.900000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:14:22:ec:be:2b
[ 4.908000] SCSI device sda: 153356490 512-byte hdwr sectors (78519 MB)
[ 4.908000] sda: Write Protect is off
[ 4.908000] sda: Mode Sense: 00 3a 00 00
[ 4.908000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.908000] SCSI device sda: 153356490 512-byte hdwr sectors (78519 MB)
[ 4.908000] sda: Write Protect is off
[ 4.908000] sda: Mode Sense: 00 3a 00 00
[ 4.908000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.908000] sda:<6>usb 5-1: configuration #1 chosen from 1 choice
[ 4.916000] hub 5-1:1.0: USB hub found
[ 4.916000] hub 5-1:1.0: 4 ports detected
[ 4.936000] sda1 sda2 < sda5 >
[ 4.960000] sd 0:0:0:0: Attached scsi disk sda
[ 4.960000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.964000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.972000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.972000] Uniform CD-ROM driver Revision: 3.20
[ 4.972000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.180000] Attempting manual resume
[ 5.180000] swsusp: Resume From Partition 8:5
[ 5.180000] PM: Checking swsusp image.
[ 5.180000] PM: Resume from disk failed.
[ 5.228000] kjournald starting. Commit interval 5 seconds
[ 5.228000] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.336000] iTCO_vendor_support: vendor-support=0
[ 16.340000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 16.340000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.340000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.504000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.508000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.580000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.580000] agpgart: Detected an Intel 945GM Chipset.
[ 16.596000] intel_rng: FWH not detected
[ 16.596000] agpgart: AGP aperture is 256M @ 0x0
[ 16.728000] input: PC Speaker as /class/input/input2
[ 16.928000] nvidia: module license 'NVIDIA' taints kernel.
[ 17.080000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000
[ 17.120000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 17.180000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.180000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 17.180000] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 17.216000] NET: Registered protocol family 17
[ 17.256000] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
[ 17.404000] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
[ 17.404000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 17.404000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 17.412000] ndiswrapper: using IRQ 17
[ 17.516000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 17.516000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 17.912000] wlan0: ethernet device 00:16:ce:19:40:bd using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: '', 14E4:4311.5.conf
[ 17.912000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 17.912000] usbcore: registered new interface driver ndiswrapper
[ 17.912000] ndiswrapper: changing interface name from 'wlan0' to 'eth1'
[ 18.020000] fuse init (API version 7.8)
[ 18.100000] lp: driver loaded but no devices found
[ 18.120000] Adding 3028212k swap on /dev/disk/by-uuid/441166c3-d609-411a-835d-adefce55ed28. Priority:-1 extents:1 across:3028212k
[ 18.232000] EXT3 FS on sda1, internal journal
[ 18.592000] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 18.592000] b44: eth0: Flow control is off for TX and off for RX.
[ 22.632000] ibm_acpi: ec object not found
[ 22.664000] No dock devices found.
[ 22.684000] ACPI: AC Adapter [AC] (on-line)
[ 22.776000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 22.780000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 22.780000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 22.816000] input: Lid Switch as /class/input/input4
[ 22.816000] ACPI: Lid Switch [LID]
[ 22.816000] input: Power Button (CM) as /class/input/input5
[ 22.816000] ACPI: Power Button (CM) [PBTN]
[ 22.816000] input: Sleep Button (CM) as /class/input/input6
[ 22.816000] ACPI: Sleep Button (CM) [SBTN]
[ 22.880000] Using specific hotkey driver
[ 22.948000] ACPI: Battery Slot [BAT0] (battery present)
[ 22.956000] pcc_acpi: loading...
[ 26.452000] NET: Registered protocol family 10
[ 26.452000] lo: Disabled Privacy Extensions
[ 26.452000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 26.592000] b44: eth0: Link is down.
[ 27.620000] ppdev: user-space parallel port driver
[ 29.592000] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 29.592000] b44: eth0: Flow control is off for TX and off for RX.
[ 30.052000] apm: BIOS not found.
[ 30.392000] /dev/vmmon[5251]: Module vmmon: registered with major=10 minor=165
[ 30.392000] /dev/vmmon[5251]: Module vmmon: initialized
[ 30.532000] /dev/vmnet: open called by PID 5280 (vmnet-bridge)
[ 30.532000] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 30.532000] /dev/vmnet: port on hub 0 successfully opened
[ 30.536000] bridge-eth0: enabling the bridge
[ 30.536000] bridge-eth0: up
[ 30.536000] bridge-eth0: already up
[ 30.536000] bridge-eth0: attached
[ 30.620000] /dev/vmnet: open called by PID 5294 (vmnet-natd)
[ 30.620000] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 30.620000] /dev/vmnet: port on hub 8 successfully opened
[ 30.632000] /dev/vmnet: open called by PID 5296 (vmnet-netifup)
[ 30.632000] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 30.632000] /dev/vmnet: port on hub 1 successfully opened
[ 30.640000] /dev/vmnet: open called by PID 5295 (vmnet-netifup)
[ 30.640000] /dev/vmnet: port on hub 8 successfully opened
[ 31.216000] /dev/vmnet: open called by PID 5323 (vmnet-dhcpd)
[ 31.216000] /dev/vmnet: port on hub 1 successfully opened
[ 31.216000] /dev/vmnet: open called by PID 5322 (vmnet-dhcpd)
[ 31.216000] /dev/vmnet: port on hub 8 successfully opened
[ 31.332000] Bluetooth: Core ver 2.11
[ 31.332000] NET: Registered protocol family 31
[ 31.332000] Bluetooth: HCI device and connection manager initialized
[ 31.332000] Bluetooth: HCI socket layer initialized
[ 31.352000] Bluetooth: L2CAP ver 2.8
[ 31.352000] Bluetooth: L2CAP socket layer initialized
[ 31.552000] Bluetooth: RFCOMM socket layer initialized
[ 31.552000] Bluetooth: RFCOMM TTY layer initialized
[ 31.552000] Bluetooth: RFCOMM ver 1.8
[ 40.672000] vmnet1: no IPv6 routers present
[ 40.936000] vmnet8: no IPv6 routers present
[ 45.908000] eth0: no IPv6 routers present