rendered paste body[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000eac00 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[17179569.184000] BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data)
[17179569.184000] BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 255MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 65520
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 61424 pages, LIFO batch:15
[17179569.184000] DMI 2.2 present.
[17179569.184000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6a90
[17179569.184000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0fffced4
[17179569.184000] ACPI: FADT (v001 COMPAL N32NC 0x06040000 PTL 0x00000001) @ 0x0ffffb65
[17179569.184000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0ffffbd9
[17179569.184000] ACPI: DSDT (v001 Compal 32NC 0x06040000 MSFT 0x0100000b) @ 0x00000000
[17179569.184000] ACPI: BIOS age (1992) fails cutoff (2000), acpi=force is required to enable ACPI
[17179569.184000] ACPI: Disabling ACPI support
[17179569.184000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash pci=assign_busses
[17179569.184000] PCI: Unknown option `assign_busses'
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (0120a000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 597.507 MHz processor.
[ 14.838727] Using tsc for high-res timesource
[ 14.840361] Console: colour VGA+ 80x25
[ 14.840939] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.841484] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 14.870362] Memory: 249960k/262080k available (1910k kernel code, 11556k reserved, 1070k data, 308k init, 0k highmem)
[ 14.870375] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.950556] Calibrating delay using timer specific routine.. 1196.62 BogoMIPS (lpj=2393247)
[ 14.950676] Security Framework v1.0.0 initialized
[ 14.950695] SELinux: Disabled at boot.
[ 14.950743] Mount-cache hash table entries: 512
[ 14.951103] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 14.951127] CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 14.951157] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 14.951166] CPU: L2 cache: 256K
[ 14.951174] CPU serial number disabled.
[ 14.951181] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 14.951237] Checking 'hlt' instruction... OK.
[ 14.966730] SMP alternatives: switching to UP code
[ 14.967006] Freeing SMP alternatives: 16k freed
[ 14.967386] checking if image is initramfs... it is
[ 16.585579] Freeing initrd memory: 5523k freed
[ 16.585632] CPU0: Intel Pentium III (Coppermine) stepping 06
[ 16.585650] SMP motherboard not detected.
[ 16.585659] Local APIC not detected. Using dummy APIC emulation.
[ 16.585863] Brought up 1 CPUs
[ 16.585918] migration_cost=0
[ 16.586848] NET: Registered protocol family 16
[ 16.586937] EISA bus registered
[ 16.598373] PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1
[ 16.598393] PCI: Using configuration type 1
[ 16.598400] Setting up standard PCI resources
[ 16.602168] ACPI: Interpreter disabled.
[ 16.602182] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.602205] pnp: PnP ACPI: disabled
[ 16.602218] PnPBIOS: Scanning system for PnP BIOS support...
[ 16.602267] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6b00
[ 16.602279] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9d79, dseg 0x400
[ 16.608617] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 16.608764] PCI: Probing PCI hardware
[ 16.608775] PCI: Probing PCI hardware (bus 00)
[ 16.609208] PCI: Ignoring BAR0-3 of IDE controller 0000:00:07.1
[ 16.609341] PCI quirk: region 1000-103f claimed by PIIX4 ACPI
[ 16.609351] PCI quirk: region 1040-104f claimed by PIIX4 SMB
[ 16.609366] PIIX4 devres E PIO at 0378-037f
[ 16.609377] PIIX4 devres G PIO at 002e-002f
[ 16.609823] Boot video device is 0000:01:01.0
[ 16.611536] PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
[ 16.611566] PCI: Found IRQ 11 for device 0000:00:04.0
[ 16.611580] PCI: Sharing IRQ 11 with 0000:00:04.1
[ 16.611599] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 16.614003] pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 16.614015] pnp: 00:0a: ioport range 0x1000-0x103f has been reserved
[ 16.614025] pnp: 00:0a: ioport range 0x1040-0x104f has been reserved
[ 16.614718] PCI: Bridge: 0000:00:01.0
[ 16.614725] IO window: disabled.
[ 16.614736] MEM window: f0000000-f7ffffff
[ 16.614746] PREFETCH window: 28000000-280fffff
[ 16.614757] PCI: Bus 2, cardbus bridge: 0000:00:04.0
[ 16.614766] IO window: 00001c00-00001cff
[ 16.614775] IO window: 00002000-000020ff
[ 16.614786] PREFETCH window: 20000000-21ffffff
[ 16.614796] MEM window: 22000000-23ffffff
[ 16.614805] PCI: Bus 6, cardbus bridge: 0000:00:04.1
[ 16.614813] IO window: 00002400-000024ff
[ 16.614822] IO window: 00002800-000028ff
[ 16.614832] PREFETCH window: 24000000-25ffffff
[ 16.614842] MEM window: 26000000-27ffffff
[ 16.614878] PCI: Found IRQ 11 for device 0000:00:04.0
[ 16.614892] PCI: Sharing IRQ 11 with 0000:00:04.1
[ 16.614911] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 16.614921] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 16.614945] PCI: Found IRQ 11 for device 0000:00:04.1
[ 16.614956] PCI: Sharing IRQ 11 with 0000:00:04.0
[ 16.614976] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 16.614986] PCI: Setting latency timer of device 0000:00:04.1 to 64
[ 16.615060] NET: Registered protocol family 2
[ 16.649793] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 16.650077] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 16.650308] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 16.650428] TCP: Hash tables configured (established 8192 bind 4096)
[ 16.650437] TCP reno registered
[ 16.650923] Simple Boot Flag at 0x38 set to 0x1
[ 16.652481] audit: initializing netlink socket (disabled)
[ 16.652519] audit(1181511224.000:1): initialized
[ 16.652949] VFS: Disk quotas dquot_6.5.1
[ 16.653017] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.653179] Initializing Cryptographic API
[ 16.653193] io scheduler noop registered
[ 16.653215] io scheduler anticipatory registered
[ 16.653240] io scheduler deadline registered
[ 16.653283] io scheduler cfq registered (default)
[ 16.653298] Limiting direct PCI/PCI transfers.
[ 16.653942] isapnp: Scanning for PnP cards...
[ 17.008290] isapnp: No Plug & Play device found
[ 17.084230] Real Time Clock Driver v1.12ac
[ 17.084442] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.084679] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.086622] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 17.087311] mice: PS/2 mouse device common for all mice
[ 17.089087] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.089750] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 17.089763] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 17.090257] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 17.105293] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 17.106201] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.108075] EISA: Probing bus 0 at eisa.0
[ 17.108100] Cannot allocate resource for EISA slot 1
[ 17.108109] Cannot allocate resource for EISA slot 2
[ 17.108153] EISA: Detected 0 cards.
[ 17.108855] TCP bic registered
[ 17.108885] NET: Registered protocol family 1
[ 17.108906] NET: Registered protocol family 8
[ 17.108913] NET: Registered protocol family 20
[ 17.108979] Using IPI No-Shortcut mode
[ 17.110254] Freeing unused kernel memory: 308k freed
[ 17.145343] input: AT Translated Set 2 keyboard as /class/input/input0
[ 18.408681] Capability LSM initialized
[ 19.786857] PIIX4: IDE controller at PCI slot 0000:00:07.1
[ 19.786890] PIIX4: chipset revision 1
[ 19.786898] PIIX4: not 100% native mode: will probe irqs later
[ 19.786917] ide0: BM-DMA at 0x1050-0x1057, BIOS settings: hda:DMA, hdb:pio
[ 19.786944] ide1: BM-DMA at 0x1058-0x105f, BIOS settings: hdc:DMA, hdd:pio
[ 19.786964] Probing IDE interface ide0...
[ 20.075750] hda: FUJITSU MHT2040AT, ATA DISK drive
[ 20.748587] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 20.749140] Probing IDE interface ide1...
[ 21.482934] hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
[ 22.188754] ide1 at 0x170-0x177,0x376 on irq 15
[ 22.209094] hda: max request size: 128KiB
[ 22.245475] hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
[ 22.247241] hda: cache flushes supported
[ 22.247356] hda: hda1 hda2 < hda5 >
[ 22.333462] hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
[ 22.333487] Uniform CD-ROM driver Revision: 3.20
[ 22.778993] usbcore: registered new driver usbfs
[ 22.779061] usbcore: registered new driver hub
[ 22.783272] USB Universal Host Controller Interface driver v3.0
[ 22.783384] PCI: Found IRQ 5 for device 0000:00:07.2
[ 22.783431] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 22.783700] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 22.783746] uhci_hcd 0000:00:07.2: irq 5, io base 0x00001060
[ 22.783984] usb usb1: configuration #1 chosen from 1 choice
[ 22.784057] hub 1-0:1.0: USB hub found
[ 22.784082] hub 1-0:1.0: 2 ports detected
[ 23.031893] Attempting manual resume
[ 23.083928] kjournald starting. Commit interval 5 seconds
[ 23.083963] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.579912] PCI: Found IRQ 11 for device 0000:00:04.0
[ 40.579932] PCI: Sharing IRQ 11 with 0000:00:04.1
[ 40.579954] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 40.579973] Yenta: CardBus bridge found at 0000:00:04.0 [103c:0014]
[ 40.579995] Yenta: Enabling burst memory read transactions
[ 40.580005] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 40.580012] Yenta: Routing CardBus interrupts to PCI
[ 40.580023] Yenta TI: socket 0000:00:04.0, mfunc 0x01ac1b22, devctl 0x66
[ 40.859608] Yenta: ISA IRQ mask 0x0698, PCI irq 11
[ 40.859648] Socket status: 30000006
[ 40.930227] PCI: Found IRQ 11 for device 0000:00:04.1
[ 40.930245] PCI: Sharing IRQ 11 with 0000:00:04.0
[ 40.930267] PCI: Sharing IRQ 11 with 0000:01:01.0
[ 40.930292] Yenta: CardBus bridge found at 0000:00:04.1 [103c:0014]
[ 40.930317] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 40.930325] Yenta: Routing CardBus interrupts to PCI
[ 40.930336] Yenta TI: socket 0000:00:04.1, mfunc 0x01ac1b22, devctl 0x66
[ 41.053322] Linux agpgart interface v0.101 (c) Dave Jones
[ 41.095341] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.168186] Yenta: ISA IRQ mask 0x0698, PCI irq 11
[ 41.168198] Socket status: 30000020
[ 41.281367] agpgart: Detected an Intel 440BX Chipset.
[ 41.286128] agpgart: AGP aperture is 64M @ 0xf8000000
[ 41.286195] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.547606] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 41.679576] PCI: Found IRQ 5 for device 0000:00:08.0
[ 41.679607] PCI: Sharing IRQ 5 with 0000:00:08.1
[ 42.138943] pccard: CardBus card inserted into slot 1
[ 43.951103] Floppy drive(s): fd0 is 1.44M
[ 43.969572] FDC 0 is a post-1991 82077
[ 44.004849] parport: PnPBIOS parport detected.
[ 44.004921] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 44.045983] input: PC Speaker as /class/input/input1
[ 44.129625] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 44.132323] cs: IO port probe 0x3e0-0x4ff: clean.
[ 44.133207] cs: IO port probe 0x820-0x8ff: clean.
[ 44.134526] cs: IO port probe 0xc00-0xcf7: clean.
[ 44.135588] cs: IO port probe 0xa00-0xaff: clean.
[ 44.271013] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0
[ 44.335315] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 44.433857] cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
[ 44.435927] cs: IO port probe 0x3e0-0x4ff: clean.
[ 44.436810] cs: IO port probe 0x820-0x8ff: clean.
[ 44.437611] cs: IO port probe 0xc00-0xcf7: clean.
[ 44.438676] cs: IO port probe 0xa00-0xaff: clean.
[ 44.573282] Linux Tulip driver version 1.1.14 (May 6, 2006)
[ 44.573412] PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
[ 44.573465] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 44.574196] tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
[ 44.581763] eth0: ADMtek Comet rev 17 at Port 0x2400, 00:18:4D:6E:DF:B4, IRQ 11.
[ 44.967665] ts: Compaq touchscreen protocol output
[ 45.988468] lp0: using parport0 (interrupt-driven).
[ 46.069790] Adding 746980k swap on /dev/disk/by-uuid/1992423c-9b17-427e-9cc3-85f8f43c1549. Priority:-1 extents:1 across:746980k
[ 46.194045] EXT3 FS on hda1, internal journal
[ 46.327906] NET: Registered protocol family 17
[ 48.225512] 0000:06:00.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
[ 48.225534] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1.
[ 60.125414] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 79.315725] Bluetooth: Core ver 2.8
[ 79.315743] NET: Registered protocol family 31
[ 79.315750] Bluetooth: HCI device and connection manager initialized
[ 79.315791] Bluetooth: HCI socket layer initialized
[ 79.357210] Bluetooth: L2CAP ver 2.8
[ 79.357225] Bluetooth: L2CAP socket layer initialized
[ 79.421731] Bluetooth: RFCOMM socket layer initialized
[ 79.421772] Bluetooth: RFCOMM TTY layer initialized
[ 79.421780] Bluetooth: RFCOMM ver 1.7
[ 176.564090] NET: Registered protocol family 10
[ 176.564369] lo: Disabled Privacy Extensions
[ 176.564803] IPv6 over IPv4 tunneling driver
[ 187.107367] eth1: no IPv6 routers present
[ 247.322924] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 247.362736] ISOFS: changing to secondary root