;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ls
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=no
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
busydetect=no
;busycount=6
callprogress=no
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;; Span 1: R2T1 01:06.0 0b0b:0605
;group=0
;context=from-trunk
;signalling = pri_cpe
;channel => 1-23
; Example for a Rhino CB24-FXS. Comment the above lines and un-comment below to use.
group=1
context=from-pstn
signalling = fxs_ks
channel => 1-8
group=3
context=from-internal
signalling=fxo_ks
channel=>9-24
;; Span 2: R2T1 01:06.0 0b0b:0605
;group=0
;context=from-trunk
;signalling = pri_cpe
;channel => 25-47
; Example for a Rhino CB24-FXS. Comment the above lines and un-comment below to use.
group=2
context=from-pstn
switchtype=national
; CLI> reload chan_zap.so
; will reload the configuration file,
; but not all configuration options are
; re-configured during a reload.
[trunkgroups]
;
; Trunk groups are used for NFAS or GR-303 connections.
;
; Group: Defines a trunk group.
; trunkgroup => <trunkgroup>,<dchannel>[,<backup1>...]
;
; trunkgroup is the numerical trunk group to create
; dchannel is the zap channel which will have the
; d-channel for the trunk.
; backup1 is an optional list of backup d-channels.
;
;trunkgroup => 1,24,48
;trunkgroup => 1,24
;
; Spanmap: Associates a span with a trunk group
; spanmap => <zapspan>,<trunkgroup>[,<logicalspan>]
;
; zapspan is the zap span number to associate
; trunkgroup is the trunkgroup (specified above) for the mapping
; logicalspan is the logical span number within the trunk group to use.
; if unspecified, no logical span number is used.
;
;spanmap => 1,1,1
;spanmap => 2,1,2
;spanmap => 3,1,3
;spanmap => 4,1,4
[channels]
;
; Default language
;
;language=en
;
; Default context
;
context=default
;
; Switchtype: Only used for PRI.
;
; national: National ISDN 2 (default)
; dms100: Nortel DMS100
; 4ess: AT&T 4ESS
; 5ess: Lucent 5ESS
; euroisdn: EuroISDN
; ni1: Old National ISDN 1
; qsig: Q.SIG
;
Switchtype=national
context=from-pstn
signalling =pri_cpe
channel => 25-47
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs