rendered paste bodyboot: fedora7-amd64 noapic nohpet
Loading /fedora/7/x86_64/vmlinuz.................................
Loading /fedora/7/x86_64/initrd.img.........................................................................................
Ready.
Linux version 2.6.21-1.3194.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:47:07 EDT 2007
Command line: initrd=/fedora/7/x86_64/initrd.img ramdisk_size=32768 root=/dev/ram0 devfs=mount,dall rw serial=ttyS0 console=ttyS0,9600 text BOOT_IMAGE=/fedora/7/x86_64/vmlinuz noapic nohpet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007efc0000 (usable)
BIOS-e820: 000000007efc0000 - 000000007efce000 (ACPI data)
BIOS-e820: 000000007efce000 - 000000007eff0000 (ACPI NVS)
BIOS-e820: 000000007eff0000 - 000000007f000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
end_pfn_map = 1048576
DMI present.
ACPI: RSDP 000FB9F0, 0014 (r0 ACPIAM)
ACPI: RSDT 7EFC0000, 0040 (r1 _ASUS_ Notebook 1000715 MSFT 97)
ACPI: FACP 7EFC0200, 0084 (r2 A_M_I_ OEMFACP 1000715 MSFT 97)
ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
ACPI: DSDT 7EFC05C0, 4D15 (r1 A0557 A0557000 0 INTL 20060113)
ACPI: FACS 7EFCE000, 0040
ACPI: APIC 7EFC0390, 0070 (r1 A_M_I_ OEMAPIC 1000715 MSFT 97)
ACPI: MCFG 7EFC0400, 003C (r1 A_M_I_ OEMMCFG 1000715 MSFT 97)
ACPI: SLIC 7EFC0440, 0176 (r1 _ASUS_ Notebook 1000715 MSFT 97)
ACPI: OEMB 7EFCE040, 0060 (r1 A_M_I_ AMI_OEM 1000715 MSFT 97)
ACPI: HPET 7EFC52E0, 0038 (r1 A_M_I_ OEMHPET0 1000715 MSFT 97)
ACPI: SSDT 7EFC5320, 01C4 (r1 A_M_I_ POWERNOW 1 AMD 1)
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000007efc0000
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000007efc0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 520128
ACPI: PM-Timer IO Port: 0x508
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: Skipping IOAPIC probe due to 'noapic' option.
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000
I/O APIC #2 at 0xFEC00000.
Setting APIC routing to physical flat
Processors: 2
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f000000:7fc00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 43648 bytes of per cpu data
Built 1 zonelists. Total pages: 511641
Kernel command line: initrd=/fedora/7/x86_64/initrd.img ramdisk_size=32768 root=/dev/ram0 devfs=mount,dall rw serial=ttyS0 console=ttyS0,9600 text BOOT_IMAGE=/fedora/7/x86_64/vmlinuz noapic nohpet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2009.139 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
CPU 0: aperture @ 60bc000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 2037428k/2080512k available (2319k kernel code, 42696k reserved, 1375k data, 316k init)
Calibrating delay using timer specific routine.. 4020.70 BogoMIPS (lpj=2010350)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 8c20)
Using local APIC timer interrupts.
result 12557137
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4024.19 BogoMIPS (lpj=2012099)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Brought up 2 CPUs
migration_cost=102
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
ACPI: PCI Interrupt Link [LSA1] (IRQs *5)
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
pnp: 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
pnp: 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
pnp: 00:07: iomem range 0xffb80000-0xffffffff could not be reserved
pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:09: iomem range 0x7f000000-0x7fffffff has been reserved
pnp: 00:0b: ioport range 0x230-0x23f has been reserved
pnp: 00:0b: ioport range 0x290-0x29f has been reserved
pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved
pnp: 00:0b: ioport range 0xa10-0xa1f has been reserved
pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0e: iomem range 0xc0000-0xcffff has been reserved
pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0e: iomem range 0x100000-0x7effffff could not be reserved
PCI: Bridge: 0000:00:04.0
Time: acpi_pm clocksource has been installed.
IO window: e000-efff
MEM window: dff00000-dfffffff
PREFETCH window: 80000000-800fffff
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5563k freed
audit: initializing netlink socket (disabled)
audit(1181123474.919:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
ksign: Installing public key data
Loading keyring
- Added public key F2580AE679027173
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
?serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32768K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 316k freed
Write protecting the kernel read-only data: 1032k
Greetings.
anaconda installer init version 11.2.0.66 starting
mounting /proc filesystem... done
creating /dev filesystem... done
mounting /dev/pts (unix98 pty) filesystem... done
mounting /sys filesystem... done
BUG: soft lockup detected on CPU#1!
Call Trace:
<IRQ> [<ffffffff802ad31e>] softlockup_tick+0xd5/0xe7
[<ffffffff8028ac35>] update_process_times+0x42/0x68
[<ffffffff8026e710>] smp_local_timer_interrupt+0x34/0x55
[<ffffffff8026ee36>] smp_apic_timer_interrupt+0x43/0x5b
[<ffffffff80257d56>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff8025f8ef>] do_page_fault+0x31d/0x7b5
[<ffffffff8025f8d1>] do_page_fault+0x2ff/0x7b5
[<ffffffff8025ddfd>] error_exit+0x0/0x84
[<ffffffff8022cd46>] __clear_user+0x3f/0x61
[<ffffffff80279d9c>] padzero+0x1b/0x2b
[<ffffffff80217229>] load_elf_binary+0x9fd/0x17e7
[<ffffffff8023c923>] search_binary_handler+0xbb/0x219
[<ffffffff8023be69>] do_execve+0x18c/0x242
[<ffffffff8028f7e1>] __call_usermodehelper+0x0/0x5b
[<ffffffff8024e845>] sys_execve+0x36/0x4c
[<ffffffff80257fa4>] kernel_execve+0x64/0xd0
[<ffffffff8028f7e1>] __call_usermodehelper+0x0/0x5b
[<ffffffff802712e6>] physflat_send_IPI_mask+0x0/0x6a
[<ffffffff8028fc7e>] ____call_usermodehelper+0x166/0x174
[<ffffffff80257f38>] child_rip+0xa/0x12
[<ffffffff8028f7e1>] __call_usermodehelper+0x0/0x5b
[<ffffffff802712e6>] physflat_send_IPI_mask+0x0/0x6a
[<ffffffff8028fb18>] ____call_usermodehelper+0x0/0x174
[<ffffffff80257f2e>] child_rip+0x0/0x12
Call Trace:
<IRQ> [<ffffffff802ad31e>] softlockup_tick+0xd5/0xe7
[<ffffffff8028ac35>] update_process_times+0x42/0x68
[<ffffffff8026e710>] smp_local_timer_interrupt+0x34/0x55
[<ffffffff8026ee36>] smp_apic_timer_interrupt+0x43/0x5b
[<ffffffff80257d56>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff8025f8ef>] do_page_fault+0x31d/0x7b5
[<ffffffff8025f8d1>] do_page_fault+0x2ff/0x7b5
[<ffffffff8025ddfd>] error_exit+0x0/0x84
[<ffffffff8022cd46>] __clear_user+0x3f/0x61
[<ffffffff80279d9c>] padzero+0x1b/0x2b
[<ffffffff80217229>] load_elf_binary+0x9fd/0x17e7
[<ffffffff8023c923>] search_binary_handler+0xbb/0x219
[<ffffffff8023be69>] do_execve+0x18c/0x242
[<ffffffff8028f7e1>] __call_usermodehelper+0x0/0x5b
[<ffffffff8024e845>] sys_execve+0x36/0x4c
[<ffffffff80257fa4>] kernel_execve+0x64/0xd0
[<ffffffff8028f7e1>] __call_usermodehelper+0x0/0x5b
[<ffffffff802712e6>] physflat_send_IPI_mask+0x0/0x6a
[<ffffffff8028fc7e>] ____call_usermodehelper+0x166/0x174
[<ffffffff80257f38>] child_rip+0xa/0x12
[<ffffffff8028f7e1>] __call_usermodehelper+0x0/0x5b
[<ffffffff802712e6>] physflat_send_IPI_mask+0x0/0x6a
[<ffffffff8028fb18>] ____call_usermodehelper+0x0/0x174
[<ffffffff80257f2e>] child_rip+0x0/0x12