rendered paste body<6>sa11x0-uart.3: ttySA0 at MMIO 0x80050000 (irq = 17) is a SA1100
<4>MTD Sharp chip driver <ds@lineo.com>
<4>Sharp chip, b000b0, b000b0, width = 4
<6>SA1100 flash: CFI device at 0x00000000, 16MiB, 32-bit
<5>cmdlinepart partition parsing not available
<5>RedBoot partition parsing not available
<5>SA1100 flash: using static partition definition
<5>Creating 3 MTD partitions on "sa1100":
<5>0x00000000-0x000c0000 : "bootloader"
<5>0x000c0000-0x001c0000 : "kernel"
<5>0x001c0000-0x00fe0000 : "rootfs"
<6>mice: PS/2 mouse device common for all mice
<5>pccard: PCMCIA card inserted into slot 0
<5>pcmcia: registering new device pcmcia0.0
<6>input: LoCoMo keyboard as /class/input/input0
<6>sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
<6>TCP cubic registered
<6>NET: Registered protocol family 1
<7>sharpsl register pm_ops
<6>sa1100-rtc sa1100-rtc: setting the system clock to 1970-01-01 00:05:13 (313)
<4>VFS: Mounted root (jffs2 filesystem) readonly.
<6>Freeing init memory: 76K
<4>Collie: stopping charger
<4>Interrupt should acknowledge charger off?!
<4>Collie: charger stopped?
<4>Collie: starting charger
<4>Interrupt should acknowledge charger on status?!
<4>Collie: charger started?
<7>ieee80211_crypt: registered algorithm 'NULL'
<6>hostap_cs: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
<7>hostap_cs: setting Vcc=33 (constant)
<7>Checking CFTABLE_ENTRY 0x01 (default 0x01)
<7>IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
<7>io->flags = 0x0046, io.base=0x0000, len=64
<6>hostap_cs: Registered netdevice wifi0
<4>pcmcia: request for exclusive IRQ could not be fulfilled.
<4>pcmcia: the driver needs updating to supported shared IRQ lines.
<6>hostap_cs: index 0x01: , irq 35, io 0xc2820000-0xc282003f
<7>prism2_hw_init: initialized in 300 ms
<6>wifi0: NIC: id=0x800c v1.0.0
<6>wifi0: PRI: id=0x15 v1.1.1
<6>wifi0: STA: id=0x1f v1.7.4
<7>wifi0: registered netdevice wlan0
<7>orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
<7>orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
<6>Bluetooth: Core ver 2.11
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP ver 2.8
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
<6>NET: Registered protocol family 10
<6>NET: Registered protocol family 23
<6>IrCOMM protocol (Dag Brattli)
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM ver 1.8
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<7>Collie MMC over SPI Driver
<7>mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
<7>mmc_spi .0: mmc_spi: powermode 0
<7>mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 1
<6>mmc_spi .0: SD/MMC <-> SPI proxy driver, no card power management
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: clock to 125000 Hz, 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD0 arg 00000000 flags 00000040
<7>mmc_spi .0: mmc_spi: cmd0 (00)
<7>mmc_spi .0: CMD0 response SPI_R1: response error, -110
<7>mmc_spi .0: mmc_spi: cmd0 (00)
<7>mmc_spi .0: CMD0 response SPI_R1: response error, -110
<3>mmc_spi .0: can't initialize the card: no card or because the active chip-select level can't be inverted?
<7>mmc0: req done (CMD0): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: response error, -110
<7>mmc0: req done (CMD55): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: response error, -110
<7>mmc0: req done (CMD55): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: response error, -110
<7>mmc0: req done (CMD55): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: response error, -110
<7>mmc0: req done (CMD55): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD1 arg 00000000 flags 00000061
<7>mmc_spi .0: mmc_spi: cmd1 (01)
<7>mmc_spi .0: CMD1 response SPI_R1: response error, -110
<7>mmc0: req done (CMD1): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
<7>mmc_spi .0: mmc_spi: powermode 0
<7>mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 1
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD0 arg 00000000 flags 00000040
<7>mmc_spi .0: mmc_spi: cmd0 (00)
<7>mmc_spi .0: CMD0 response SPI_R1: resp 00.01
<7>mmc0: req done (CMD0): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: resp 00.01
<7>mmc0: req done (CMD55): 0/0/0: 00000020 00000000 00000000 00000000
<7>mmc0: starting CMD41 arg 00000000 flags 00000061
<7>mmc_spi .0: mmc_spi: acmd41 (29)
<7>mmc_spi .0: ACMD41 response SPI_R1: resp 00.01
<7>mmc_spi .0: retry for init complete...
<7>mmc_spi .0: mmc_spi: cmd1 (01)
<7>mmc_spi .0: patchup R3/OCR ...
<7>mmc_spi .0: mmc_spi: cmd58 (3a)
<7>mmc0: req done (CMD58): 0/0/0: 80ff8000 00000000 00000000 00000000
<7>mmc0: starting CMD2 arg 00000000 flags 00000067
<7>mmc_spi .0: mmc_spi: cmd10 (0a)
<7>mmc0: req done (CMD10): 0/0/0: 6f000041 5357494e 10000002 c400752b
<7>mmc0: starting CMD3 arg 00000000 flags 00000075
<7>mmc0: req done (CMD3): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD2 arg 00000000 flags 00000067
<7>mmc0: req done (CMD2): 1/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD9 arg 00000000 flags 00000007
<7>mmc_spi .0: mmc_spi: cmd9 (09)
<7>mmc0: req done (CMD9): 0/0/0: 002f0032 575b83bf 6db7ffff 96c000c7
<7>mmc0: starting CMD7 arg 00000000 flags 00000015
<7>mmc0: req done (CMD7): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc0: req done (CMD55): 0/0/0: 00000620 00000000 00000000 00000000
<7>mmc0: starting CMD51 arg 00000000 flags 00000035
<7>mmc_spi .0: mmc_spi: acmd51 (33)
<7>mmc0: req done (CMD51): 0/0/0: 00000600 00000000 00000000 00000000
<7>mmc_spi .0: mmc_spi: read block, 8 bytes
<7>mmc0: starting CMD7 arg 00000000 flags 00000000
<7>mmc0: req done (CMD7): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD7 arg 00000000 flags 00000015
<7>mmc0: req done (CMD7): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD6 arg 00fffff1 flags 00000035
<7>mmc_spi .0: mmc_spi: cmd6 (06)
<7>mmc_spi .0: CMD6 response SPI_R1: resp 00.04
<7>mmc0: req done (CMD6): 5/0/0: 00400600 00000000 00000000 00000000
<7>mmc0: starting CMD7 arg 00000000 flags 00000000
<7>mmc0: req done (CMD7): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: selected 25.000MHz transfer rate
<7>mmc0: clock 25000000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: clock to 25000000 Hz, 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
<7>mmc_spi .0: mmc_spi: powermode 0
<7>mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 1
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: clock to 125000 Hz, 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD0 arg 00000000 flags 00000040
<7>mmc_spi .0: mmc_spi: cmd0 (00)
<7>mmc_spi .0: CMD0 response SPI_R1: response error, -110
<7>mmc_spi .0: mmc_spi: cmd0 (00)
<7>mmc_spi .0: CMD0 response SPI_R1: response error, -110
<3>mmc_spi .0: can't initialize the card: no card or because the active chip-select level can't be inverted?
<7>mmc0: req done (CMD0): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: response error, -110
<7>mmc0: req done (CMD55): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: response error, -110
<7>mmc0: req done (CMD55): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: response error, -110
<7>mmc0: req done (CMD55): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: response error, -110
<7>mmc0: req done (CMD55): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD1 arg 00000000 flags 00000061
<7>mmc_spi .0: mmc_spi: cmd1 (01)
<7>mmc_spi .0: CMD1 response SPI_R1: response error, -110
<7>mmc0: req done (CMD1): 4/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
<7>mmc_spi .0: mmc_spi: powermode 0
<7>mmc0: clock 0Hz busmode 1 powermode 1 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 1
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 1 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD0 arg 00000000 flags 00000040
<7>mmc_spi .0: mmc_spi: cmd0 (00)
<7>mmc_spi .0: CMD0 response SPI_R1: resp 00.01
<7>mmc0: req done (CMD0): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: resp 00.01
<7>mmc0: req done (CMD55): 0/0/0: 00000020 00000000 00000000 00000000
<7>mmc0: starting CMD41 arg 00000000 flags 00000061
<7>mmc_spi .0: mmc_spi: acmd41 (29)
<7>mmc_spi .0: ACMD41 response SPI_R1: resp 00.01
<7>mmc_spi .0: retry for init complete...
<7>mmc_spi .0: mmc_spi: cmd1 (01)
<7>mmc_spi .0: patchup R3/OCR ...
<7>mmc_spi .0: mmc_spi: cmd58 (3a)
<7>mmc0: req done (CMD58): 0/0/0: 80ff8000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 1 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD0 arg 00000000 flags 00000040
<7>mmc_spi .0: mmc_spi: cmd0 (00)
<7>mmc_spi .0: CMD0 response SPI_R1: resp 00.01
<7>mmc0: req done (CMD0): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 1 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc_spi .0: CMD55 response SPI_R1: resp 00.01
<7>mmc0: req done (CMD55): 0/0/0: 00000020 00000000 00000000 00000000
<7>mmc0: starting CMD41 arg 00300000 flags 00000061
<7>mmc_spi .0: mmc_spi: acmd41 (29)
<7>mmc_spi .0: ACMD41 response SPI_R1: resp 00.01
<7>mmc_spi .0: retry for init complete...
<7>mmc_spi .0: mmc_spi: cmd1 (01)
<7>mmc_spi .0: patchup R3/OCR ...
<7>mmc_spi .0: mmc_spi: cmd58 (3a)
<7>mmc0: req done (CMD58): 0/0/0: 80ff8000 00000000 00000000 00000000
<7>mmc0: starting CMD2 arg 00000000 flags 00000067
<7>mmc_spi .0: mmc_spi: cmd10 (0a)
<7>mmc0: req done (CMD10): 0/0/0: 6f000041 5357494e 10000002 c400752b
<7>mmc0: starting CMD3 arg 00000000 flags 00000075
<7>mmc0: req done (CMD3): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD2 arg 00000000 flags 00000067
<7>mmc0: req done (CMD2): 1/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD9 arg 00000000 flags 00000007
<7>mmc_spi .0: mmc_spi: cmd9 (09)
<7>mmc0: req done (CMD9): 0/0/0: 002f0032 575b83bf 6db7ffff 96c000c7
<7>mmc0: starting CMD7 arg 00000000 flags 00000015
<7>mmc0: req done (CMD7): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD55 arg 00000000 flags 00000015
<7>mmc_spi .0: mmc_spi: cmd55 (37)
<7>mmc0: req done (CMD55): 0/0/0: 00000620 00000000 00000000 00000000
<7>mmc0: starting CMD51 arg 00000000 flags 00000035
<7>mmc_spi .0: mmc_spi: acmd51 (33)
<7>mmc0: req done (CMD51): 0/0/0: 00000600 00000000 00000000 00000000
<7>mmc_spi .0: mmc_spi: read block, 8 bytes
<7>mmc0: starting CMD7 arg 00000000 flags 00000000
<7>mmc0: req done (CMD7): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: starting CMD7 arg 00000000 flags 00000015
<7>mmc0: req done (CMD7): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: clock 125000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: starting CMD6 arg 00fffff1 flags 00000035
<7>mmc_spi .0: mmc_spi: cmd6 (06)
<7>mmc_spi .0: CMD6 response SPI_R1: resp 00.04
<7>mmc0: req done (CMD6): 5/0/0: 00400600 00000000 00000000 00000000
<7>mmc0: starting CMD7 arg 00000000 flags 00000000
<7>mmc0: req done (CMD7): 0/0/0: 00000000 00000000 00000000 00000000
<7>mmc0: selected 25.000MHz transfer rate
<7>mmc0: clock 25000000Hz busmode 2 powermode 2 cs 0 Vdd 20 width 0
<7>mmc_spi .0: mmc_spi: clock to 25000000 Hz, 0
<7>mmc_spi .0: mmc_spi: powermode 2
<7>mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0
<7>mmc_spi .0: mmc_spi: powermode 0
<7>wlan0: Host AP mode does not support 'Any' essid
<7>prism2: wlan0: operating mode changed 3 -> 2
<7>wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c
<7> retry_count=0 tx_rate=0 fc=0x0108 (Data::0 ToDS)
<7> A1=00:00:00:00:00:00 A2=00:0f:3d:58:79:35 A3=33:33:00:00:00:16 A4=00:00:00:00:00:00
<6>NET: Registered protocol family 17
<7>wifi0: LinkStatus=1 (Connected)
<7>wifi0: LinkStatus: BSSID=00:11:d8:43:7b:cd
<7>wlan0: no IPv6 routers present