rendered paste body(c)Copyright Delta Networks, Inc. 2006
KWGR614 Wireless Router LOADER
Version 1.00.08(uClinux) (Aug 28 2006 18:18:16)
[865xB] CPU Clock Rate: 200MHz, Memory Clock Rate: 130MHz
Detected flash size: total 4MB.
SDRAM size: 16MB
+TFTP +Force UART0 +Bank1:ROM +GZIP +LZMA +HTTP SERVER +TFTP SERVER
--== Loader Menu ==--
'c' to change config
'r' to update run image
'l' to update loader
Please select the command within 2 seconds.
POT Client Start
POT Client End
FirstAid Start
FirstAid End
Loading runtime image ...
Unzip image from address: 0xbe020000
Start GZIP Decompression: Failed
Start LZMA Decompression:
Start runtime image at 80000400.
************************************
Powered by Realtek RTL865xB SoC, rev 3
************************************
SDRAM size: 16MB
CPU revision is: 0000ff00
Init MMU (16 entries)
Primary instruction cache 0kB, linesize 0 bytes.
Primary data cache 0kB, linesize 0 bytes.
Linux version 2.4.26-uc0 (kevin@DRV_term.SWII.DNI) (gcc version 3.2) #1 Mon Sep
25 12:13:29 CST 2006
Can't analyze prologue code at 8000b524
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
NOFS reserved @ 0x802c8000
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock4
IRR(0)=c0000000
Calibrating delay loop... 199.06 BogoMIPS
Memory: 13352k/16384k available (2312k kernel code, 3032k reserved, 156k data, 9
6k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
NEW PCI Driver...isLinuxCompliantEndianMode=False(Big Endian)
[PCI] Reset Bridge ..... Finish!
using SLOT:0, FUNCTION:0
IO Space 0, data=0xffffff01 size=0x100
Memory Space 1 data=0xfffffe00 size=0x200
PCI device exists: slot 0 function 0 VendorID 10ec DeviceID 8185 bbd40000
io mapping BAnum=0 slot=0 func=0
memory mapping BAnum=1 slot=0 func=0
assign mem base 1bf00000~1bf001ff at bbd40014 size=512
assign I/O base 1be00000~1be000ff at bbd40010 size=256
Find Total 1 PCI functions
Found 00:00 [10ec/8185] 000200 00
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
LZMA decompressor support based on LZMA SDK 4.05 by Oleg I.Vdovikin
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SERIAL_PCI enabled
Probing RTL8651 home gateway controller...
Initialize RTL865x ASIC and driver
chip name: 865xB, chip revid: 3
Initialize mbuf...
creating default 2 interfaces...eth0 IRR(6)=c0040000
===> Request IRQ 6 for eth0, ret=0
IRR(7)=c0070000
===> Request IRQ 7 for eth0, ret=0
eth1 ...OK
PPP generic driver version 2.4.2
flash device: 400000 at be000000
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 6 MTD partitions on "Physically mapped flash":
0x00000000-0x00004000 : "boot1"
0x00010000-0x00020000 : "boot2"
0x003f0000-0x00400000 : "boot3"
0x00020000-0x000e0000 : "kernel"
0x000e0000-0x00420000 : "rootfs"
mtd: partition "rootfs" extends beyond the end of device "Physically mapped flas
h" -- size truncated to 0x320000
0x00004000-0x00010000 : "bdinfo"
RTL8185(for RTL865xB platform) driver version 1.12 (2006-07-26)
pcibios_set_master: already done when device probed.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
GRE over IPv4 tunneling driver
ip_conntrack version 2.1 (128 buckets, 1024 max) - 192 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 96k freed
IRR(4)=c0c70000
===> Request IRQ 4 for serial, ret=0
Shell invoked to run file: /etc/rc
Command: mount -t proc proc /proc
Command: mount -t ramfs ramfs /var
Command: mkdir /var/tmp
Command: mkdir /var/ppp/
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: #mkdir /var/hotplug
Command: #mkdir /var/hotplug/pci
Command: #mkdir /var/hotplug/usb
Command: #cp /etc/hotplug2/* /var/hotplug/
Command: mkdir /var/spool
Command: mkdir /var/spool/cron
Command: mkdir /var/spool/cron/crontabs
Command:
Command: #iwcontrol is required for RTL8185 Wireless driver
Command: #busybox insmod /lib/modules/2.4.26-uc0/kernel/drivers/net/wireless/rtl
8185.o
Command: #iwcontrol auth &
Command:
Command: #busybox insmod /lib/modules/2.4.26-uc0/kernel/drivers/usb/quickcam.o
Command: #busybox insmod /etc/webcam_tp6800.o
Command: /bin/boa -c /etc &
[16]
Command: /bin/getdeviceinfo &
[17]
Command:
Command: #mount -t usbdevfs none /proc/bus/usb
Command:
Command: # Airgo
Command: /etc/airgo.cfg
/etc/airgo.cfg: Bad command or file name
Command:
Execution Finished, Exiting
done
START
TIMER
0
do_timer::do_timer_times:0
IDLE
Sash command shell (version 1.1.1)
/> FLASH_BASE_REAL=0xbe000000
__flash_base=0x2ac38000
__crmr_addr=0x2aaaf104
__wdtcnr_addr=0x2aab003c
argv[1rtl8651_user_pid set to 16
] = -c
System initializing...
fd open error
get loader_version = VER:1.00.08
set loader_version = 1.00.08
urlfilter_tableDriverdel
rtl8651_flushUrlFilterTrustedUser...
IDLE
PPPoE Passthru disabled.
Drop Unknown PPPoE PADT disabled.
IPv6 Passthru disabled.
IPX Passthru disabled.
NETBIOS Passthru disabled.
set "eth1" mac to --> 00:18:4d:2e:d5:bd
Bring up ext port 6..
Rx shift=10002
set "eth0" mac to --> 00:18:4d:2e:d5:be
cfg wan to dhcp client ...
Set IGMP Default Upstream interface (eth0) ... SUCCESS!!
Set IGMP Default Upstream interface (eth0) ... SUCCESS!!
[wlan_setup-9053]-info-: ==> Stop wlan0
ifconfig wlan0 down
info, client (v0.9.9-pre) started
[wlan_setup-9058]-info-: ==> Stop WDS for wlan0
Turn OFF WDS interfaces ....
Turn OFF WDS interface : wlan0-wds0
==> ifconfig wlan0-wds0 down
Turn OFF WDS interface : wlan0-wds1
==> ifconfig wlan0-wds1 down
Turn OFF WDS interface : wlan0-wds2
==> ifconfig wlan0-wds2 down
Turn OFF WDS interface : wlan0-wds3
==> ifconfig wlan0-wds3 down
FLASH_BASE_REAL=0xbe000000
__flash_base=0x2ac38000
__crmr_addr=0x2aaaf104
__wdtcnr_addr=0x2aab003c
Turn OFF WDS interface : wlan0-wds4
==> ifconfig wlan0-wds4 down
Turn OFF WDS interface : wlan0-wds5
==> ifconfig wlan0-wds5 down
Turn OFF WDS interface : wlan0-wds6
==> ifconfig wlan0-wds6 down
Turn OFF WDS interface : wlan0-wds7
==> ifconfig wlan0-wds7 down
================================================
Crypt: 0
Crypt SubType: 0
Crypt SubType: 0
Auth: 2
================================================
bdinfo.wlan[0].RFChipID = 9
cckTxPower....
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
0d 0d 0d 0d
@ WLAN -0- [busybox iwpriv wlan0 set_mib chipVersion=11]
argv[1] = deconfig
dhcpc client deconfig
WAN Setting....
ifCfgParam[0].ipAddr: 0.0.0.0
ifCfgParam[0].ipMask: 0.0.0.0
@ WLAN -0- [busybox iwpriv wlan0 set_mib RFChipID=7]
@ WLAN -0- [busybox iwpriv wlan0 set_mib wifi_specific=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib regdomain=1]
@ WLAN -0- [ifconfig wlan0 hw ether 00:18:4D:2E:D5:BD]
ifCfgParam[0].gwAddr: 0.0.0.0
ifCfgParam[0].dnsPrimaryAddr: 0.0.0.0
ifCfgParam[0].dnsSecondaryAddr: 0.0.0.0
rtl8651_delNaptMapping: ret -6
rtl8651_delRoute(default): ret -3
rtl8651_delIpIntf: ret -2710
@ WLAN -0- [busybox iwpriv wlan0 set_mib rxChargePump=3]
@ WLAN -0- [busybox iwpriv wlan0 set_mib txChargePump=6]
@ WLAN -0- [busybox iwpriv wlan0 set_mib disable_protection=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib cts2self=1]
@ WLAN -0- [busybox iwpriv wlan0 set_mib preamble=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib opmode=16]
@ WLAN -0- [busybox iwpriv wlan0 set_mib wds_pure=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib hiddenAP=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib Diversity=1]
@ WLAN -0- [busybox iwpriv wlan0 set_mib DIG_enable=1]
@ WLAN -0- [busybox iwpriv wlan0 set_mib HighPowerChk=1]
@ WLAN -0- [busybox iwpriv wlan0 set_mib AntDvrsty=1]
@ WLAN -0- [busybox iwpriv wlan0 set_mib DefaultAnt=0]
[wlandrv_setup-8047]-info-: Wireless coverage: Max range.
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=0,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=0,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=1,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=1,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=2,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=2,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=3,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=3,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=4,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=4,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=5,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=5,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=6,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=6,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=7,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=7,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=8,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=8,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=9,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=9,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=10,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=10,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=11,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=11,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=12,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=12,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerOFDM=13,23]
@ WLAN -0- [busybox iwpriv wlan0 set_mib TxPowerCCK=13,13]
@ WLAN -0- [busybox iwpriv wlan0 set_mib channel=6]
@ WLAN -0- [/bin/busybox iwpriv wlan0 set_mib ssid=NETGEAR]
@ WLAN -0- [/bin/busybox iwpriv wlan0 set_mib defssid=NETGEAR]
@ WLAN -0- [busybox iwpriv wlan0 set_mib band=3]
IDLE
IDLE
@ WLAN -0- [busybox iwpriv wlan0 set_mib oprates=4095]
@ WLAN -0- [busybox iwpriv wlan0 set_mib deny_legacy=false]
@ WLAN -0- [busybox iwpriv wlan0 set_mib basicrates=15]
@ WLAN -0- [busybox iwpriv wlan0 set_mib autorate=1]
@ WLAN -0- [busybox iwpriv wlan0 set_mib fixrate=1]
@ WLAN -0- [busybox iwpriv wlan0 set_mib dtimperiod=1]
@ WLAN -0- [busybox iwpriv wlan0 set_mib expired_time=30000]
@ WLAN -0- [busybox iwpriv wlan0 set_mib longretry=6]
@ WLAN -0- [busybox iwpriv wlan0 set_mib shortretry=6]
@ WLAN -0- [busybox iwpriv wlan0 set_mib fragthres=2346]
@ WLAN -0- [busybox iwpriv wlan0 set_mib rtsthres=2346]
@ WLAN -0- [busybox iwpriv wlan0 set_mib bcnint=100]
@ WLAN -0- [busybox iwpriv wlan0 set_mib block_relay=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib deny_any=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib disable_txsc=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib disable_rxsc=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib nat25_disable=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib dhcp_bcst_disable=0]
@ WLAN -0- File (/var/8185wpa.conf) [ssid = "NETGEAR"]
@ WLAN -0- [busybox iwpriv wlan0 set_mib encmode=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib 802_1x=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib authtype=2]
@ WLAN -0- [busybox iwpriv wlan0 set_mib aclmode=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib aclnum=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib wds_priority=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib wds_enable=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib wds_num=0]
@ WLAN -0- [busybox iwpriv wlan0 set_mib led_type=7]
[wlan_setup-9118]-info-: ==> Turn ON wlan0
ifconfig wlan0 up
IRR(5)=c0c70000
===> Request IRQ 5 for wlan0, ret=0
Request IRQ5, ret=0
Register External Device (wlan0) vid (9) extPortNum (6)
Reserve port 6 for peripheral device use. (0x40)
Total WLAN/WDS links: 1
Device wlan0 on vlan ID 9 using Link ID 1. Loopback/Ext port is 6
[wlan_setup-9123]-info-: ==> Turn ON WDS for wlan0
ret:remoteMgmt_tableDriverAccess() : rtl8651_addProtoStackActions for icmp 1000
killall: udhcpd: no process killed
info, server (v0.9.9-pre) started
error, max_leases value (254) not sane, setting to 253 instead
error, Unable to open /var/udhcpd.leases for reading
killall: dnrd: no process killed
[204]
dnrd uses obsolete (PF_INET,SOCK_PACKET)
device eth1 entered promiscuous mode
Setting interface ::: eth1 ::: to promisc
killall: upnp: no process killed
SIOCDELRT: No such process
initialising master DNS database
12 records in master DNS database
killall: upnp: no process killed
upnp enter main, lanif[eth1], wan_if[eth0]
IDLE
calling upnp_main, ssdp_refresh_period:1800
upnp_main::global_ssdp_refresh:1800, upnp_refresh:1799
start_CheckWan Done
sysInit Done