Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.0.1 UGSc 7 19 en1
127 localhost UCS 0 0 lo0
localhost localhost UH 15 83210 lo0
169.254 link#5 UCS 0 0 en1
192.168.0 link#5 UCS 3 0 en1
192.168.0.1 0:13:46:4b:c5:60 UHLW 6 159 en1 645
192.168.0.102 localhost UHS 1 324 lo0
myth 0:4:5a:44:24:22 UHLW 1 131 en1 692
192.168.0.255 link#5 UHLWb 2 83 en1
192.168.42 192.168.42.100 UGSc 0 2 en1
255.255.255.0 192.168.42.220 UH 0 0 tun0
Internet6:
Destination Gateway Flags Netif Expire
localhost localhost UH lo0
link#4 UC en0
link#5 UC en1
vanquish.local 0:19:e3:5:17:ae UHL lo0
ff01:: localhost U lo0
ff02::%lo0 localhost UC lo0
ff02::%en0 link#4 UC en0
ff02::%en1 link#5 UC en1
Client:
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################
# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client
# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun
# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap
# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
proto tcp
;proto udp
# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote cv.utdallas.edu 7070
;remote my-server-2 1194
# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random
# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite
# Most clients don't need to bind to
# a specific local port number.
nobind
# Downgrade privileges after initialization (non-Windows only)
user nobody
group nobody
# Try to preserve some state across restarts.
persist-key
persist-tun
# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]
# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings
# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert vanquish.crt
key vanquish.key
# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server". This is an
# important precaution to protect against
# a potential attack discussed here:
# http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server". The build-key-server
# script in the easy-rsa folder will do this.
;ns-cert-type server
# If a tls-auth key is used on the server
# then every client must also have the key.
;tls-auth ta.key 1
# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x
# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo
# Set log file verbosity.
verb 3
# Silence repeating messages
;mute 20
Server:
local 129.110.xxx.xxx
port 7070
proto tcp
dev tap0
ca /etc/openvpn/easy-rsa/keys/ca.crt
cert /etc/openvpn/easy-rsa/keys/server.crt
key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret
dh /etc/openvpn/easy-rsa/keys/dh1024.pem
#this will assign connecting clients address between the range of 100 and 150
server-bridge 192.168.42.100 255.255.255.0 192.168.42.220 192.168.42.240
#this will allow for people to get the same IP address after a reconnect
ifconfig-pool-persist /etc/openvpn/ipp.txt
push "route 192.168.42.0 255.255.255.0"
#change this to your companies DNS server or omit it entirely
push "dhcp-option DNS 192.168.42.1"
keepalive 10 120
comp-lzo
max-clients 10
user nobody
group nobody
persist-key
persist-tun
status /var/log//openvpn-status.log
log-append /var/log/openvpn/openvpn.log
verb 6