Public feed
#531009
[root@localhost ~]# dmesg
Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000002fef0000 end: 000000002fff0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000002fff0000 size: 0000000000003000 end: 000000002fff3000 type: 4
copy_e820_map() start: 000000002fff3000 size: 000000000000d000 end: 0000000030000000 type: 3
copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 196592) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 196592
HighMem 196592 -> 196592
early_node_map[1] active PFN ranges
0: 0 -> 196592
On node 0 totalpages: 196592
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1503 pages used for memmap
Normal zone: 190993 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000F7740, 0014 (r0 VT8371)
ACPI: RSDT 2FFF3000, 0028 (r1 VT8371 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 2FFF3040, 0074 (r1 VT8371 AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 2FFF30C0, 24CA (r1 VT8371 AWRDACPI 1000 MSFT 100000C)
ACPI: FACS 2FFF0000, 0040
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 40000000 (gap: 30000000:cfff0000)
Built 1 zonelists. Total pages: 195057
Kernel command line: ro root=LABEL=/ splash=off vga=0x31a rhgb quiet
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0160c000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c077c000 soft=c075c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 900.073 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 771864k/786368k available (2066k kernel code, 13996k reserved, 1092k data, 240k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
.init : 0xc071b000 - 0xc0757000 ( 240 kB)
.data : 0xc0604a4a - 0xc0715cb4 (1092 kB)
.text : 0xc0400000 - 0xc0604a4a (2066 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1801.44 BogoMIPS (lpj=900723)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f1ff c1c7f9ff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
ACPI: setting ELCR to 0800 (from 0e00)
CPU0: AMD Athlon(tm) processor stepping 02
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1376 bytes
Time: 10:47:55 Date: 05/02/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 03): [55] 89 & 1f -> 09
PCI quirk: region 4000-40ff claimed by vt82c586 ACPI
PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
PCI quirk: region 5000-500f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
spurious 8259A interrupt: IRQ7.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:00: iomem range 0xcc800-0xcffff has been reserved
pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ec000000-edffffff
PREFETCH window: e0000000-e7ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 2808k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1180781275.671:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 65F8109C338BBD41
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Disabling Via external APIC routing
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xe0000000, mapped to 0xf0880000, using 5120k, total 32768k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:ba80
vesafb: pmi: set display start = c00cbac5, set palette = c00cbb4a
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 2 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Time: acpi_pm clocksource has been installed.
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 642 not supported
Using IPI No-Shortcut mode
Magic number: 11:443:779
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 240k freed
Write protecting the kernel read-only data: 820k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA VLink IRQ fixup for 0000:00:07.2, from 9 to 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: PS2++ Logitech MX Mouse as /class/input/input2
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: VIA VLink IRQ fixup for 0000:00:07.3, from 9 to 10
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 10, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
SCSI subsystem initialized
libata version 2.20 loaded.
pata_via 0000:00:07.1: version 0.2.1
ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001d000 irq 14
ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001d008 irq 15
scsi0 : pata_via
ata1.00: ata_hpa_resize 1: sectors = 234375000, hpa_sectors = 234441648
ata1.00: Host Protected Area detected:
current size: 234375000 sectors
native size: 234441648 sectors
ata1.00: ATA-5: WDC WD1200JB-75CRA0, 16.06V16, max UDMA/100
ata1.00: 234375000 sectors, multi 16: LBA
ata1.01: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
ata1.01: ATA-7: SAMSUNG SP1604N, TM100-23, max UDMA/133
ata1.01: 312581808 sectors, multi 16: LBA48
ata1.00: ata_hpa_resize 1: sectors = 234375000, hpa_sectors = 234441648
ata1.00: Host Protected Area detected:
current size: 234375000 sectors
native size: 234441648 sectors
ata1.00: configured for UDMA/66
ata1.01: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
ata1.01: configured for UDMA/66
scsi1 : pata_via
ata2.00: ATAPI, max UDMA/33
ata2.01: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-75C 16.0 PQ: 0 ANSI: 5
SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 234375000 512-byte hdwr sectors (120000 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sda: p3 exceeds device capacity
sd 0:0:0:0: Attached scsi disk sda
scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP1604N TM10 PQ: 0 ANSI: 5
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 0:0:1:0: Attached scsi disk sdb
scsi 1:0:0:0: CD-ROM PLEXTOR CD-R PX-W2410A 1.04 PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM PHILIPS DVDRW228 1.64 PQ: 0 ANSI: 5
attempt to access beyond end of device
sda: rw=0, want=234436305, limit=234375000
Buffer I/O error on device sda3, logical block 26683904
attempt to access beyond end of device
sda: rw=0, want=234436309, limit=234375000
Buffer I/O error on device sda3, logical block 26683905
attempt to access beyond end of device
sda: rw=0, want=234436305, limit=234375000
Buffer I/O error on device sda3, logical block 26683904
attempt to access beyond end of device
sda: rw=0, want=234436309, limit=234375000
Buffer I/O error on device sda3, logical block 26683905
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1180781313.944:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
security: 60 classes, 65638 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sdb3, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1180781314.444:3): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: Attached scsi generic sg2 type 5
scsi 1:0:1:0: Attached scsi generic sg3 type 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
Floppy drive(s): fd0 is 1.44M
attempt to access beyond end of device
sda: rw=0, want=234436305, limit=234375000
Buffer I/O error on device sda3, logical block 26683904
attempt to access beyond end of device
sda: rw=0, want=234436309, limit=234375000
Buffer I/O error on device sda3, logical block 26683905
attempt to access beyond end of device
sda: rw=0, want=234436305, limit=234375000
Buffer I/O error on device sda3, logical block 26683904
attempt to access beyond end of device
sda: rw=0, want=234436309, limit=234375000
Buffer I/O error on device sda3, logical block 26683905
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
Buffer I/O error on device sda3, logical block 26683964
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
Buffer I/O error on device sda3, logical block 26683964
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
Buffer I/O error on device sda3, logical block 26683964
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
Buffer I/O error on device sda3, logical block 26683964
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436481, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436485, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436537, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436541, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
FDC 0 is a post-1991 82077
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
input: PC Speaker as /class/input/input3
parport_pc: VIA parallel port: io=0x378, irq=7
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0d.0: 3Com PCI 3c905C Tornado at f0da4000.
gameport: EMU10K1 is pci0000:00:0f.1/gameport0, io 0xe800, speed 1269kHz
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
audit(1180774128.781:4): avc: denied { search } for pid=1025 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774128.781:5): avc: denied { search } for pid=1023 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774128.781:6): avc: denied { search } for pid=1021 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774128.781:7): avc: denied { search } for pid=1021 comm="alsactl" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774128.781:8): avc: denied { search } for pid=1025 comm="alsactl" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:9): avc: denied { search } for pid=1034 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:10): avc: denied { search } for pid=1034 comm="alsactl" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:11): avc: denied { search } for pid=1020 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:12): avc: denied { search } for pid=1020 comm="alsactl" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:13): avc: denied { search } for pid=1039 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:14): avc: denied { search } for pid=1039 comm="alsactl" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:15): avc: denied { search } for pid=1024 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:16): avc: denied { search } for pid=1024 comm="alsactl" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:17): avc: denied { search } for pid=1023 comm="alsactl" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:18): avc: denied { search } for pid=1049 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:19): avc: denied { search } for pid=1051 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:20): avc: denied { search } for pid=1052 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:21): avc: denied { search } for pid=1052 comm="alsaunmute" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:22): avc: denied { search } for pid=1049 comm="alsaunmute" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:23): avc: denied { search } for pid=1051 comm="alsaunmute" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:24): avc: denied { search } for pid=1055 comm="salsa" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774129.281:25): avc: denied { search } for pid=1055 comm="alsactl" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
loop: loaded (max 8 devices)
lp0: using parport0 (interrupt-driven).
lp0: console ready
sonypi: Sony Programmable I/O Controller Driver v1.26.
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
[<c042b0cf>] local_bh_enable+0x45/0x92
[<c06002bd>] cond_resched_softirq+0x2c/0x42
[<c059adf3>] release_sock+0x4f/0x9d
[<c05df75a>] inet_stream_connect+0x116/0x1ff
[<c0436e71>] autoremove_wake_function+0x0/0x35
[<c0599b21>] sys_connect+0x82/0xad
[<c059adb6>] release_sock+0x12/0x9d
[<c059c29d>] sock_setsockopt+0x4a2/0x4ac
[<c0598d12>] sys_setsockopt+0x6d/0xa7
[<c059a368>] sys_socketcall+0xac/0x261
[<c0475028>] sys_close+0x6e/0xa5
[<c0404f70>] syscall_call+0x7/0xb
=======================
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
audit(1180774135.780:26): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:27): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:28): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:29): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:30): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:31): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:32): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:33): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:34): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:35): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:36): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774135.780:37): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
audit(1180774137.779:38): avc: denied { search } for pid=1124 comm="rhgb" name="root" dev=sdb3 ino=9624385 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
No dock devices found.
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
attempt to access beyond end of device
sda: rw=0, want=234436305, limit=234375000
EXT3 FS on sdb3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb4, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1574360k swap on /dev/sdb2. Priority:-1 extents:1 across:1574360k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
audit(1180774146.778:39): audit_pid=1539 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
attempt to access beyond end of device
sda: rw=0, want=234436305, limit=234375000
printk: 8 messages suppressed.
Buffer I/O error on device sda3, logical block 26683904
attempt to access beyond end of device
sda: rw=0, want=234436309, limit=234375000
Buffer I/O error on device sda3, logical block 26683905
attempt to access beyond end of device
sda: rw=0, want=234436305, limit=234375000
Buffer I/O error on device sda3, logical block 26683904
attempt to access beyond end of device
sda: rw=0, want=234436309, limit=234375000
Buffer I/O error on device sda3, logical block 26683905
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
Buffer I/O error on device sda3, logical block 26683964
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
Buffer I/O error on device sda3, logical block 26683964
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
Buffer I/O error on device sda3, logical block 26683964
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
Buffer I/O error on device sda3, logical block 26683964
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436481, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436485, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436537, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436541, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
attempt to access beyond end of device
sda: rw=0, want=234436545, limit=234375000
eth0: setting full-duplex.
PPP generic driver version 2.4.2
eth0: no IPv6 routers present
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access Samsung YP-U1 2000 PQ: 0 ANSI: 4
SCSI device sdc: 1011712 512-byte hdwr sectors (518 MB)
sdc: Write Protect is off
sdc: Mode Sense: 38 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 1011712 512-byte hdwr sectors (518 MB)
sdc: Write Protect is off
sdc: Mode Sense: 38 00 00 00
sdc: assuming drive cache: write through
sdc: sdc1
sd 2:0:0:0: Attached scsi removable disk sdc
sd 2:0:0:0: Attached scsi generic sg4 type 0
SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0